Time flies, a period of work has come to an end, looking back on the past work, doubly fulfilling, harvest a lot, develop a work summary. So the question is, how to write a work summary? The following is my work summary of radiation safety and protection, for your reference and reference, I hope to help friends in need.
Radiation safety protection work summary 1First, the basis for handling
"Chinese People's **** and the State Law on Prevention and Control of Radioactive Pollution", "Chinese People's **** and the State Law on Prevention and Control of Occupational Diseases" and the Office of the Central Organizational Preparation Committee "on the division of responsibilities for the supervision of the department of radioactive sources of radiation safety notification" (Central Office of the Office of the Central Organizational Preparation issued [2003]). No. 17).
Second, the object
China's enterprises and institutions engaged in the production, import and export, sales, use, storage and disposal of radioactive sources.
Third, the approval conditions
Radiation work unit approval conditions:
1, with the environmental impact report (table) or registration form approval documents;
2, with the "three simultaneous" inspection of the qualified documents;
3, a radiation protection management organization and its relevant staff;
4, with the necessary radiation protection supplies and monitoring instruments;
5, the development of appropriate monitoring program;
6, radiation staff must be trained in professional and protective knowledge and health;
7, the development of detailed safety and protection management regulations;
8, the State Environmental Protection Administration of other relevant requirements.
Fourth, the procedure
1, the source unit to the administrative department of environmental protection to submit the "license" application form.
2, the administrative department of environmental protection within 20 working days of the source unit involved in on-site verification, meet the requirements of the issuance of "license".
3, the source of units involved in the "license" for the "transfer of radioactive sources of four".
4, source-related units with the "transfer of radioactive sources," the purchase of radioactive sources.
5, to the administrative department of environmental protection for the registration of radioactive source declaration.
6, installation and commissioning, put into trial operation.
7, trial run within three months, apply for environmental facilities completion acceptance, acceptance, approval of the formal operation.
For those who do not meet the requirements, the problems, specific requirements for rectification and rectification time frame. The original unit to rectify the completion of the rectification, write a summary report of rectification, and re-acceptance procedures.
Overdue rectification or rectification after acceptance is still unqualified, the "license" of the original licensing authority to revoke its "license", and ordered to apply for the transfer of radioactive sources, and the radioactive sources back to the original sales unit or sent to the city radioactive waste storage.
V. Processing time limit
Environmental Protection Administration received the "Radiation Safety License Application Form" within 20 days from the date of the organization's on-site inspection, according to the results of the inspection to determine whether to issue a license.
Six, the "license" is valid
"License" is valid for five years. Involved in the source unit should be three months before the expiration of the validity period in accordance with the relevant provisions of the "license" to apply for renewal of the "license".
VII, the "license" re-examination
"License" is re-examined once a year. Involved in the source unit should be in the re-examination of the deadline three months before the "license" has pointed to the provisions of the application for the replacement of the "license" re-examination application, the original licensing authority from the date of receipt of the application within 10 days, in accordance with the "Basic Standards for Protection against Ionizing Radiation and Safety of Radiation Sources," and the relevant regulations and standards of the safety and protection of the requirements of its a comprehensive review of the review and on-site inspection, in line with the requirements, to be verified and a copy of the "certificate of authorization" to The license shall be validated, and a copy of the License Certificate shall be affixed with a re-examination anti-counterfeiting label, and its License shall remain valid. Does not meet the requirements of the regulations, issued a letter of rectification.
Application materials for re-examination include:
1, "copy of the license";
2, the source unit involved in the "license" to engage in radiation activities and have not been the local environmental protection, public security, health and administrative departments of the penalties to prove.
3, changes in the scope and content of the license involved in the Permit;
4, copies of the import coupons of radioactive sources, transfer four coupons and summary tables;
5, environmental monitoring reports issued by monitoring organizations recognized by the environmental protection administrative departments;
6, summary of changes in radiation staff, a copy of the certificate of induction of radiation safety management and Individual dose monitoring materials;
7, annual summary of work (including national laws, regulations, standards and the implementation of various systems; radiation workplace safety; work failure or accident handling; self-management of organizational activities; decommissioning, storage and disposal of radioactive sources; "license" approval authority required to provide other information).
Where the overdue replacement or re-examination of the "license", such as the need to increase the scope of licensing and licensing content, should be to the "license" number will no longer be retained.
VIII, "License" change
1, has led to the questionable license "source units, such as the need to increase the scope of licensing and licensing content, it should be to the "License" to the approval authority to apply.
The approval of the change in the scope and content of the license conditions, be changed, and issued a "license", and the use of the original "license" number, the continuation of the original expiration date unchanged.
2, the source unit relocation workplace, another workplace or another workplace outside the workplace, should be in accordance with this procedure to re-apply for the "license"; another workplace (workplace), "the license" indicates the workplace (workplace).
3, involving the source unit to change the name of the unit, the person in charge, the name of the address, should be the location of the municipalities of the provincial environmental protection administrative department review and approval, reported to the state or provincial environmental protection administrative department for approval, and at the same time, to provide the following relevant materials.
(1), change the name, person in charge, address of the original industrial and commercial business license or other supporting documents;
(2), the original "license"
After the "license" review and approval of the approval department, a new license (the original "license" number and validity period remains unchanged), and at the same time, to withdraw the original "license".
(3), the source unit involved in the change of name, person in charge, address of the original business license or other supporting documents.
IX, "lost license" reissue
"license" lost, should be published in a timely manner at the provincial level or above in the newspaper of the loss, with the publication of the newspaper of the loss of notice and reissue of the "license" application, signed by the competent administrative department of the location of the environmental protection, reported to the "license" examination and approval of the approval department, to be The license will be reissued.
Tenth, the "license" cancellation
"license" cancellation, the source unit involved in the decommissioning of radiation work project environmental impact assessment documents and radioactive raw materials and radioactive waste disposal materials. After approval, can be canceled.
Summary of radiation safety and protection work 2Over the past year, my unit conscientiously implement the "radioisotopes and radiation device safety and protection regulations," and other laws and regulations, from the safety management of radiation devices to start, and constantly improve the radiation protection management system, the implementation of radiation protection measures to strengthen radiation monitoring, radiation protection management work continues to be improved. Now the annual radiation safety and protection work is summarized as follows:
First, attach great importance to strengthening the organization and management
My unit attaches great importance to radiation protection, the establishment of a sound radiation safety management organization and monitoring and protection team, the unit of radiation safety and protection of the work of management and supervision, responsible for the health management of radiation workers, personal dose management, training management; Regular testing of radiological equipment. Regular and irregular radiation protection inspections are carried out annually to detect hidden radiation protection problems and solve radiation protection problems and the safety and security of radioactive sources. The regulations and facilities are constantly improved and perfected in accordance with the requirements of the relevant departments of the higher levels of radiation protection.
Further standardization and improvement of the unit's radiation protection management of the relevant rules and regulations, ray device monitoring, management system is basically sound, the implementation of good; improve the monitoring and management system, emergency preparedness, in accordance with the relevant provisions of the establishment and improvement of the management system of the personnel, including health management, training management, etc.
Secondly, we have been working on the development and implementation of the radiation protection system.
Second, the implementation of measures to strengthen the safety and protection work, in accordance with the requirements of relevant laws and regulations, radiation protection of the premises, alarms, warning signs, emergency exits, etc., carried out rigorous testing and improvement, basically to meet the relevant provisions.
Radiation staff are licensed to work; the establishment of radiation staff personal dose files; radiation staff wearing personal dosimeters on duty; radiation staff are engaged in regular radiation staff health checkups; regularly sent to participate in the environmental protection department and the health line supervisory departments organized by the class, and constantly improve the level of professional knowledge related to radiation protection.
Purchased personal protective equipment, in accordance with the relevant provisions of the radiological examination room to strengthen the radiation protection of the examinee.
Overall, in the organization and management, system management, place management, equipment management, personnel management, etc. have done more detailed work to achieve better results.
Radiation safety protection work summary 3
Combined with my company's actual, from the safety management of radioactive sources to do a good job, the establishment and improvement of radiation safety and protection management system, the implementation of radiation precautions, to strengthen radiation monitoring, radiation protection management work continues to be improved. My company's radiation safety protection work is summarized as follows:
First, the nuclear scale device overview
My company currently has a nuclear technology application project 1 DF5500 nuclear scale, installed in the first phase of the ore dressing plant milling workshop, mainly used to belt conveyor belt on the amount of iron ore into the mill for measurement. This nuclear scale is produced by Dandong Dongfang Measurement and Control Technology Co., Ltd. and contains one cesium-137 radioactive source with an activity of 1.48GBq (August 22, 2006) at the factory. The total investment of the project is 250,000 RMB, which was approved by the Fujian Provincial Environmental Protection Bureau on September 13, 2006, and the project was put into production and trial operation in December 2006, and obtained the Radiation Safety License issued by the Fujian Provincial Environmental Protection Bureau on February 13, 2007 (Certificate No.: Min Environmental Radiation Safety License [00036]).
Second, the radiation safety protection facilities
137Cs is a sealed radioactive source, the radioactive source is placed in the lead canister, the use of non-contact measurements, the radioactive source (envelope) did not have a direct contact with the material being measured, and will not cause damage to the radioactive source. There is no direct contact between the source (shell) and the material being measured, and no damage to the source is caused. Eye-catching ionizing radiation warning signs have been placed on the surface of the lead canisters and on the conveyor belt of the grinding plant.
Third, management measures
In accordance with the requirements of the "Radioisotopes and Radiation Devices Safety License Management Measures" (State Environmental Protection Administration Decree No. 31), the company has been equipped with a safety officer with a bachelor's degree full-time responsible for radiation safety and environmental protection management. The staff of the nuclear scale have all participated in the radiation safety and protection training organized by the Provincial Environmental Protection Office and have been licensed; the effect of radiation protection is regularly monitored to ensure the safe operation of the nuclear scale. Health monitoring of staff, health checkups before starting work and regular medical checkups after starting work.
At the same time, the company has established a perfect nuclear scale safety management system, which contains a series of rules and regulations, such as "radiation protection personnel duties", "nuclear scale maintenance system", "nuclear scale safety operating procedures", "environmental protection standards, radioisotope device safety precautionary provisions" and so on.
Fourth, emergency rescue
In order to effectively respond to possible radiation accidents, to ensure that the organization of the accident rescue work in an orderly manner, to minimize or eliminate the impact of accidents and emergencies, and to avoid the spread and expansion of the accident, the formulation of the "nuclear scales of radioactive sources leakage emergency plan", a clear possible accident Emergency response responsibilities, organization and command, work procedures, to do a good job of all preventive measures, so that safety and operation in parallel.
Fifth, file management
The company has established a nuclear scale file information, the establishment of equipment ledger, so that the account matches the goods, and carefully save the internal data, environmental protection department approval of documents, monitoring reports and other technical files are archived, properly preserved.
My company's radiation safety management of the work are in strict accordance with relevant laws and regulations and the implementation of the relevant rules and regulations of the plant, to protect the radiation zero accident, zero harm. In the future work, will further strengthen the radiation safety measures, improve the rules and regulations and strictly enforced. At the same time to strengthen the training and learning, to ensure long-term safety of radiation work, to ensure safe production.
Radiation safety and protection work summary 4According to the "Chinese People's *** and State Radioactive Pollution Prevention and Control Law", "Radioisotopes and Radiation Devices Safety and Protection Regulations", "Radiation Workers Health Regulations" and "Radiological Diagnosis and Treatment Management Regulations" and other laws and regulations, in accordance with environmental protection, the competent authorities of the administrative department of health on the management of radiation safety and protection, combined with the actuality of the hospital from our In accordance with the requirements of environmental protection and health administrative departments on radiation safety and protection management, and in conjunction with the actual situation of our hospital, we have started to do a good job in the safety management of radioactive sources, established and perfected the management system of radiation protection, implemented the radiation protection measures, strengthened the radiation monitoring, and improved the management of radiation protection. Now to the leaders briefly reported as follows:
First, the basic situation
Rugao City, mill head hospital, is a comprehensive non-profit hospital, located in the mill head of the town of Deng Gao village neighborhood, the existing business premises 4506 square meters, 126 employees, set up a hospital bed 81.
Radiology set up in the hospital on the right side of the first floor of the comprehensive business building, radiological work room *** count 90 square meters, CT room plus control room 45, 500mAX machine room plus control room 45. existing professional and technical staff of 3 people, of which: 2 physicians, technicians, 1 person; the main equipment and facilities are: 500max optical diagnostic machine 1, medical diagnostic machine 1, reading a light box 1, microcomputer, 3, printer 1. 3, 1 printer.
Second, protection facilities
(a) environmental safety protection: CT room, 500max light diagnostic machine room common central control room, CT room, 500max light diagnostic machine room are 24cm brick plus 1.5cm barium sulphate painting, CT room top 3mm lead plate plus color steel tile, 500max light diagnostic machine room using cast-in-place 12cm brick plus 1.5cm barium sulfate, the top of the room with 3mm lead plate plus color steel tiles, 500max light diagnostic machine room with 12mm lead plate plus color steel tile, the top of the room with 3mm lead plate plus color steel tile. The CT room is made of 3mm lead plate with color steel tiles, and the 500max optical diagnostic room is made of cast-in-place 12cm concrete. The observation windows of the control room are made of 15cm thick lead glass. The protection effect reaches 3mmPb equivalent. The thickness of the machine room operator's entrance and exit door and patient's entrance and exit door is 5cm, lined with 5mm thick lead sheet.
(B) Radiation protection equipment: lead apron, lead collar, half protective apron.
(C) three-waste treatment: ray device in the work process is mainly generated by the X-ray external irradiation, in addition to irradiation can be shielding materials to be shielded, due to the lower energy of X-rays, in the process of work will not produce a sense of radioactive substances, so do not have to consider the radioactive "three wastes" of the process; in the work process will produce a small amount of ozone and nitrogen oxides, a small amount of ozone and nitrogen oxides. A small amount of ozone and nitrogen oxides can be generated during the working process, which can be ventilated by using ventilation fans.
Three management measures
(a) sound management organization. The hospital attaches great importance to radiation safety and protection work, set up in charge of radiation safety work of the vice president of Comrade Shi Lei for the leader, Director of Radiology Wang Guirong and staff members Ding Zhengjiang, Sun Hao comrades as members of the "radiation safety and protection of the leading group", is fully responsible for the management of radiation safety and protection of the hospital within the organization of radiation containing devices, equipment, use, storage, storage, and other equipment and equipment. The organization of radiation-containing devices, equipment, use, storage, emergency treatment, waste recycling, training and education of radiological staff, publicity of radiation protection knowledge, supervision and implementation of radiological diagnosis and treatment management regulations, inspection of radiological machinery and equipment and its environment, timely elimination of radiological failures and hidden security risks.
(B) the establishment and improvement of radiation protection safety management system. Radiology Post Responsibility System", "Radiology Regular Self-examination and Monitoring System", "Radiology Emergency Control and Safeguard Measures" and so on.
(C) emergency response. In order to effectively respond to possible radiation accidents, to ensure the orderly organization of accident rescue work, minimize or eliminate the impact of accidents and emergencies, to avoid the spread and expansion of accidents, to maintain the normal order of medical work, the development of the "occurrence of radiation accidents contingency plan", set up a vice-president of the Vice President of the Comrade Shi Lei for the vice-chairman of the leading group of the emergency treatment of radiological accidents, the relevant personnel as members of the leading group of the emergency treatment of radiological accidents. Clearly may occur accident emergency response responsibilities, organizational command, work procedures.
Four, daily management.
1, in order to enhance the radiation protection awareness of radiation staff, strengthen the radiation staff engaged in radiological work professional knowledge training and basic skills training, the radiation staff to take a variety of forms of multi-channel training, and commitment to all of our radiation staff to participate in the provincial and municipal environmental protection departments to participate in the professional knowledge of radiation safety and protection training.
2, regular monitoring of the effect of radiation protection and calibration of monitoring instruments and equipment to ensure that the monitoring of normal operation. 20xx Nantong Center for Disease Control and Prevention of X-ray diagnostic radiology room of the hospital qualified, respectively, reported the results of the monitoring results and calibration results, the issuance of monitoring reports and calibration certificates.
3, health monitoring of radiation staff, first, health checkups before going on duty, and regular medical checkups after going on duty. Second, the staff on duty must wear a personal badge dosimeter, and regularly tested by the Rugao City Center for Disease Control and Prevention. On the basis of the foregoing work, in June 20xx I hospital to the environmental protection department to put forward radiation protection acceptance and safety permit declaration, July - September city and county environmental protection bureau leaders and experts have personally visited our hospital many times to carry out on-site inspections and technical guidance, put forward corrective comments, in accordance with the requirements of the city and county environmental protection bureau, I hospital put forward the "on the acceptance of the radiation license protection measures rectification Report", the development and implementation of rectification measures, the radiology department of each channel, door modification, the new installation of the door machine interlock, warning lights, warning signs, illuminated patients and staff isolation call equipment, hanging and posting the warning language, the purchase of radiation monitors, personal badge dosimeters, etc., by the municipal and county environmental protection bureau leaders and experts to review the assessment and acceptance of the hospital's radiation protection in line with the safety requirements, on October 9, 20xx, the municipal environmental protection bureau gave my hospital the "radiation license protection measures acceptance and correction", the city and county environmental protection bureau. On the 9th, the city environmental protection bureau issued a "radiation safety license" to our hospital.
Although the hospital's radiation protection work has been greatly improved, but there are still some shortcomings, in the future, our hospital to further protection, monitoring facilities and equipment to increase investment in the management of more efforts to strengthen the monitoring, protection, safety awareness, to ensure that the people and health care personnel safety.