How to operate the plastic tape cutting machine

Press the "length" key to set the length of the pipe to be cut; press the "0-9" numeric keys to input the length of the required pipe, press the "+" or "-" key to change the number after the decimal point cyclically, press the "SET" key to confirm the input, the length of the display of the value just set. Press "+" or "-" key to change the number after the decimal point in the cycle, press "SET" key to confirm the input, the length of the display just set the value, you can also press "CLR "CLR" key will input clear, press the "stop" key to return to the main screen.

(2) Press the "SPD" key to set the speed of the alignment. The larger the value, the faster the speed, the minimum value of 0, the maximum value of 99.

(3) Press the "CUT" key to set the number of times each cutter action.

(4) Press the "TOL" key to set the number of tubes to be cut.

(5) Press the "UNIT" key to set the quantity to be cut for 1 batch.

(6) Press the "FUN" key, and then press the numeric key "2" to set the pause time for each batch of 1. 0-9 seconds, 0 means no pause.

(7) Install the pipe fittings to be cut.

(8) Press the "RUN" key to start the cutting control.

(9) Press the "STOP" key or "Emergency Stop" key to stop the cutting action.

(9) Press "Stop" or "Emergency Stop" to stop the cutting action.