You can change the seal, drum washing machine seal replacement method:
1, open the washing machine door, with a screwdriver will be the door seal from the cracks in the steel wire ring out.
2. Loosen the door seal clamp bolt and push the seal inward.
3. Gently pry the lower panel of the washer open with a screwdriver and take it off.
4.Remove the entire washer panel.
5.Remove the washing machine housing and you will see the complete seal.
6, pull outward to remove the door seal from the outer drum. Install the new seal.
7. To replace the seal, tighten the bolts with the 3 leak holes facing down.
8, then install the panel in the same order as it was removed.