Use of autoclave
1 Add the appropriate amount of water to the outer pot, put the items to be sterilized into the inner pot, cover the lid and symmetrically twist the spiral.
2 Heating to produce steam in the pot, when the pressure gauge pointer reaches 33.78kPa, open the exhaust valve, the cold air will be discharged, at this time the pressure gauge pointer down, when the pointer falls to zero, that is, the exhaust valve closed.
3 continue to heat, steam increase in the pot, the pressure gauge pointer and rise, when the pot pressure increases to the required pressure, the fire will be reduced, according to the characteristics of the sterilized items, so that the steam pressure to maintain the required pressure for a certain period of time, and then will be cut off or cut off the fire, so that it is naturally cold, and then slowly open the exhaust valve to exclude the residual gas, and then you can open the lid to take
The use of autoclave sterilization pots Precautions
a The items to be sterilized should not be placed too tight; b must be fully excluded from the cold air, otherwise the temperature inside the pot can not reach the specified temperature, affecting the sterilization effect; c After sterilization, can not be deflated to reduce the pressure, otherwise the liquid inside the bottle will be boiling violently, rushing off the bottle stopper and spillage or even lead to the container burst. Must wait until the pressure inside the sterilizer to equal the atmospheric pressure before you can open the lid; d has a microcomputer automatic control of the autoclave, just put off the cold air, the instrument can automatically constant pressure timing, time to automatically cut off the power supply and siren, it is very convenient to use.
The use of autoclave
Suitable for medical and health care, scientific research, agriculture and other units, medical equipment, dressings, glassware, solution media, etc. for sterilization, is the ideal equipment. Portable autoclave is a food factory, drinking water factory QS, HACCP certification of the necessary inspection equipment.
Product configuration of autoclave
Safety valve: over the rated pressure, release the pressure;
Handwheel: rotating compass to open the lid door, simple and convenient (suitable for more than 40 liters of products);
Gauge: indication of the pressure display;
Seal: self-rising seals; the bottom of the movable wheel;
Steam collection Bottle: 3L, polyethylene material; (suitable for internal discharge and with drying type) with the product of medical equipment registration certificate, each through the Technical Supervision Bureau of strict testing (each device with a set of test certificates)
The technical parameters of the autoclave
(1) Production capacity: 3168 cans / pots of time (6,120 cans of head counting)
(2) The inner diameter of the pot: 1200 ㎜
(3) Inner volume of the pot: 4.2 cubic meters
(4) Number of sterilizing baskets: 4pcs
(5) Working pressure: ?0.35MPa
(6) Working temperature: ?142℃
(7) Recirculating water: 150 cubic meters/hour
(8) Working steam pressure: 0.5 MPa
(9) Cooling Water Pressure: 0.3-0.4 MPa
(10) Compressed Air Pressure: 0.5-0.7 MPa
(11) Overall Dimension: 4000?2040?2250㎜
(12) Weight: 3450㎏