The cause of the failure is analyzed
Classification of the cause of the failure
Precautionary measures
Question 2: How to write a report on the status of the maintenance of the equipment ah 15 points I. Fault equipment name. The use of the Department of bluff, installation location, the user, the time of failure.
II. Fault phenomenon. Cause analysis. Treatment of countermeasures. Emergency response. Planned completion time. Maintenance person in charge
III. The actual completion of the status of maintenance, after the maintenance of the test machine and test operation records
IV. Maintenance cost. Estimated repair cost. Actual Repair Cost
v. Downtime. Planned downtime. Actual downtime.
VI. Total maintenance loss. = repair parts cost + labor hours cost + downtime production output loss + scrap loss
VII. Follow-up failure prevention measures
According to this order to write can be
Question 3: machine and equipment failure after the emergence of the analysis and responsibility report how to write the repeated failure of the equipment will be affected by the failure of the production schedule, it is necessary to thoroughly investigate the causes and ultimately solve the problem.
The required report is in fact a detailed investigation methodology and process records, belonging to the ISO9000 system of standard workflow:
1. Failure classification: mechanical, electronic, system, program
2. Failure characteristics: fault code, performance status, persistence
3. Failure of the solution and the solution to the success of the performance 4. The person responsible for the failure of the equipment, the time of the failure, human failure or failure during normal production.
5. Failure to report the time, the participants
Question 4: equipment maintenance failure continuous bad spare parts, the leadership to write a report how to write this report is mainly to analyze the reasons for continuous bad spare parts, according to the damage to spare parts and the operating conditions of the equipment at the time, should be able to analyze the specific reasons for damage to the spare parts of the equipment, but the report should pay attention to, even if it is due to their own Assembly problems caused by the report should be noted, even if it is because of their own assembly problems, do not write their own assembly reasons, be sure to find the reasons for the operation of the equipment or spare parts quality problems, because if it is the reason for their own assembly, to be punished, and said to be the reason for the operation of the equipment, a relatively long period of time to run, the equipment is damaged by fatigue or the internal concentration of force and so on the reasons, the leadership of the leadership at most as long as a few sentences, so that to strengthen the daily inspection on the end of the problem, the quality of the spare parts problem, it will be with the Spare parts manufacturers to pull the skin, if the relationship with spare parts manufacturers, spare parts manufacturers may also pay it, they will not be disciplined.
Problem 5: equipment accident report model equipment after the accident in accordance with the equipment accident "four do not spare the principle" to analyze and write a report, first of all, to convene an accident analysis meeting, the cause of the accident is not clear do not spare Geng first to find out the cause of the accident, the accident is responsible for who is responsible for what kind of education should be subject to, the report should also play a role in educating the majority of people. The report should also serve the purpose of educating the majority of people, how much the loss of the accident. As well as future measures to prevent the occurrence of accidents is what.
Question 6: how to write the equipment scrapping application report on the factory part of the equipment scrapping request
Head office:
Three ring head office seagull machinery factory existing part of the equipment is old, the main office of the 90 door telephone semi-automatic exchanges, the Desheng brand 10-seat vans, the logistics department of the warehouse shed, steaming car, the production department of the **-type 50-ton stamping presses, the above The above equipment has been repaired many times, but the effect is not good, the cost of repeated maintenance is very high, and part of the equipment exists in the safety hazards, there is no maintenance value. For this reason, the factory department has decided to report the above equipment for disposal. Hereby, please approve the request!
Chang Sanjiang Sanhuan General Company Haiou Machinery Factory
January 13, 2009
Answer Supplement With a detailed list of equipment:
Question 7: How to write an equipment accident analysis report? The best model? Cited, look at it
In 2005, the construction of the country at all levels of administrative departments and construction system cadres and workers conscientiously implement the Party Central Committee, the State Council on the production safety of a series of guidelines, policies, the scientific concept of development to lead the work of the whole situation, closely around the production safety objectives set at the beginning of the year, the full implementation of production safety at all levels of responsibility, consolidate the foundation, strengthen the supervision of the National The safety situation of building construction continues to show a trend of overall stabilization and improvement.
Overall situation of building construction accidents in 2005
In 2005, 2,288 accidents and 2,607 deaths occurred in the national construction industry (including railway, transportation, water conservancy and other specialized projects)***, with the number of accidents and deaths decreasing by 11.4% and 6.5% respectively (according to the State Administration of Work Safety's "National Work Safety Casualties and Injuries of All Kinds of Accidents (according to the State Administration of Work Safety's "National Work Safety Casualty Tables"). Among them, building construction and municipal engineering *** construction accidents (hereinafter referred to as "building construction accidents", the object of analysis of this analysis report that is, building construction accidents) 1,015, 1,193 deaths, compared with the previous year, the number of accidents fell by 11.28%, the number of deaths fell by 9.89%; their *** There were 43 accidents of serious starvation in building construction with more than 3 deaths at one time and 170 deaths (no accidents with more than 10 deaths at one time), compared with the previous year, the number of accidents increased by 2.38% and the number of deaths decreased by 2.86%.
The number of deaths in construction accidents fell in 16 regions across the country, and the decline exceeded the national average (the national average decline of 9.89%) in 13 regions. Among them, the decline rate of more than 30% in five regions: Hainan Province (61.9%) Shanxi Province (50%), Guangxi Zhuang Autonomous Region (50%), Henan Province (43.55%), Jiangxi Province (41.38%).
Some areas have seen a decrease in the number of accidents but an increase in the number of fatalities, such as Beijing, where the number of accidents decreased by 11.76% and the number of fatalities increased by 1.43%, and Tianjin, where the number of accidents decreased by 37.5% and the number of fatalities increased by 5.88%, and similarly in Jiangsu Province and Qinghai Province.
In 2005, there are nine areas of building construction accidents and deaths than the same period last year rose, such as Jilin Province, the number of accidents rose by 12.5%, the number of deaths rose by 5.88%; Heilongjiang Province, the number of accidents rose by 28.95%, the number of deaths rose by 26.09%, and similar areas there are Liaoning, Anhui, Hunan, Sichuan, Yunnan, Shaanxi and other provinces and *** Autonomous Region
In 2005, the number of accidents in Heilongjiang Province increased by 28.95%, and the number of deaths increased by 26.09%.
In 2005, the 10 regions with the highest number of fatalities in building construction accidents were Guangdong Province (84 deaths), Zhejiang Province (78 deaths), Jiangsu Province (77 deaths), Shanghai Municipality (74 deaths), Sichuan Province (72 deaths), Beijing Municipality (71 deaths), Heilongjiang Province (58 deaths), Liaoning Province (58 deaths), Yunnan Province (54 deaths), Hebei Province (54 deaths) and Hebei Province (58 deaths). 54 deaths), Hebei Province (50 deaths).
In 2005, the death rate of 10 billion yuan of output value of the national building construction accidents was 3.43 (people / 10 billion yuan). There are 10 areas of building construction 10 billion yuan output value mortality rate is lower than the national average, respectively, Shanxi Province (0.63), Shandong Province (1.41), Zhejiang Province (1.69), Jiangsu Province (1.76), Hunan Province (2.38), Tianjin (2.48), Jiangxi Province (3.13), Henan Province (3.31), Hubei Province (3.37), the rest of the area 10 billion yuan The mortality rate of the remaining regions with 10 billion yuan of output value is higher than the national average, among which the higher ones are Gansu Province (15.20), Qinghai Province (14.79), Guizhou Province (14.59), Hainan Province (13.45) and Heilongjiang Province (10.13).
In 2005, there were 19 areas in the country where Level 3 accidents occurred, of which 1 Level 3 accident occurred in 7 areas: Beijing, Inner Mongolia Autonomous Region, Hubei Province, Hunan Province, Guizhou Province, *** Autonomous Region, Shaanxi Province; 2 Level 3 accidents occurred in 6 areas: Tianjin, Hebei Province, Anhui Province, Zhejiang Province, Shandong Province, Gansu Province; 3 Level 3 accidents occurred in 2 areas: Heilongjiang Province (9 deaths), Henan Province (10 deaths); 4 accidents occurred in three areas: Liaoning Province (17 deaths), Guangdong Province (16 deaths), Sichuan Province (22 deaths); 6 accidents occurred in one area: Jiangsu Province (24 deaths).
Special analysis of the accident situation in building construction
Analysis of all casualties in building construction nationwide in 2005
Analysis of accident types. 20 ...... >>
Question 8: How to write a maintenance report Equipment maintenance report includes the following:
Equipment name, equipment model, equipment fixed asset number, equipment failure phenomenon, equipment failure cause analysis, maintenance methods used, spare parts name and model, quantity, after the maintenance of the trial effect, of course, there should be the operator's signature to recognize the prevention of failure. The way to prevent failures.
Finally, write the name of the maintenance personnel, maintenance time (the maintenance hours used) Year Month Day
Question 9: How to write a report on the existence of problems with fire equipment, monitoring equipment? The heat wave key when the poisonous Chen Pawn
Question 10: How to write a report on the aging failure of the host of the fire equipment owner Hello, I am very pleased to answer this question for you
May I ask who you are going to write to Is it in the company or in the factory or elsewhere