Environmental protection supervision is in action.
If the following 29 points are not completed, you will never start work!
the minister of environmental protection talks about environmental supervision: environmental protection in 217 is no joke, and the overall pattern of environmental supervision at the central and provincial levels has been formed.
On April 5th, the Ministry of Environmental Protection held a video conference on intensified supervision of air pollution prevention and control.
on April 6th, the first phase of intensive supervision training on air pollution prevention and control in Beijing, Tianjin and Hebei and its surrounding areas was held in Beijing.
on April 7th, 224 people who participated in the first round of intensive supervision on air pollution prevention and control will go to the "2+26" city to carry out intensive supervision work in an all-round way ...
In just three days, the environmental supervision work was put in place from the meeting, which is the largest action directly organized by the state level in history.
driven by the central supervision effect, at present, 21 provinces and municipalities in China have issued documents on the division of responsibilities for environmental protection. Twenty-four provinces and municipalities have introduced environmental protection supervision programs. The promulgation of these documents has compacted the environmental responsibility of local governments at all levels, and the overall pattern of environmental supervision at the central and provincial levels has been formed.
in 217, the central environmental protection inspection team will conduct full coverage of the remaining 15 provinces and cities, including Hunan, Xinjiang, Tibet, Guizhou, Anhui, Sichuan, Shanxi, Shandong, Tianjin, Hainan, Liaoning, Jilin, Zhejiang, Shanghai and Fujian.
A new round of environmental protection inspectors is about to start. Enterprises need to know: What do environmental protection inspectors mainly check at the enterprise site?
Ministry of Environmental Protection reminds: If you don't do the following 29 points well, you will never start work!
1. What do environmental inspections usually check?
according to the speeches of the relevant leaders of the inspector group, the key points of environmental protection investigation are to supervise the provincial party Committee and government to implement the national environmental protection decision-making, solve outstanding environmental problems, implement the main responsibility of environmental protection, promote the construction of ecological civilization and environmental protection in Guangdong Province, and promote green development.
1. Focus on the outstanding environmental problems that are highly concerned by the central government, strongly reflected by the masses and have a bad social impact and their handling;
2. Focus on the regional river basins with deteriorating environmental quality and their remediation;
3. Focus on inspecting the environmental inaction and chaos of local party committees and governments and their relevant departments;
4. Focus on understanding the local implementation of environmental protection, such as party and government sharing responsibilities, one post and two responsibilities, and strict accountability.
second, what will the local inspection check?
if the enterprise has one of the following problems, it will be fined, shut down, ordered to rectify, interviewed, etc., so please check yourself!
1. Accessories of powder, related coal-fired boilers and other equipment should be sealed up while producing accessories;
2. products with noise and strong smell should also be rectified;
3. Non-standard manufacturers without business licenses need to be reorganized;
4. By the way, check the fire safety hazards;
5. By the way, check fake and shoddy products
6. Steal waste water;
7. Discharge pungent gas such as paint smell;
8. Low frequency noise or excessive noise;
9, dust pollution;
1. The EIA has not been publicized;
11. There is no environmental protection approval procedure;
12. There are hidden dangers in the operation safety of the motor unit;
13, illegal construction;
14. Privately set concealed pipes for sewage discharge;
15. Coal cinders are scattered everywhere;
16. There are problems in digging and burying paper residue;
17. No wastewater recovery system;
18, did not apply for water permit;
19, there is no bright business;
2. Other wastes are stored in ponds without anti-leakage measures;
21. Poor and old pollution control facilities;
22. The smoke emission concentration exceeds the standard;
23. The garbage piled up in the factory was not handled in time;
24. The environmental impact assessment document has not been submitted for approval;
25. The pollution control facilities have not been accepted by the environmental protection department;
26. The sewage discharge permit has expired;
27, illegal production;
28. The COD of the filter tank exceeds the standard;
29. No pollution discharge permit.
what does environmental supervision and law enforcement mainly check at the enterprise site?
eight aspects!
I. Rights of environmental inspectors
When conducting on-site inspection, there shall be no less than two environmental inspectors engaged in on-site law enforcement, and they shall show their identity and explain the law enforcement matters, such as China Environmental Supervision Law Enforcement Certificate.
Environmental monitoring personnel have the following rights:
(1) To enter relevant places for investigation, sampling, monitoring, taking photos, making audio and video recordings and making records;
(2) consulting and copying relevant materials;
(3) make an appointment and ask relevant personnel, ask for explanations of relevant matters and provide relevant materials;
(4) ordering to stop or correct the illegal act;
(5) Apply the summary procedure of administrative punishment and make a decision on administrative punishment on the spot;
(6) other measures stipulated by laws, regulations and rules.
enterprises should remember: do not violently resist the law, do not enforce it, and do not cooperate with supervisors. Otherwise, the consequences will be serious.
2. Environmental monitoring generally checks the contents
1. Production situation of the enterprise
A. Industry and main products of the enterprise
B. Products and production capacity of last month, and whether there are operations in each line.
2. Implementation of enterprise environmental protection
A. Whether the project has fulfilled the EIA procedures according to law, and check the EIA documents and EIA reply
B. Check whether the nature, production scale, location, production technology adopted or pollution control measures adopted by the project are consistent with the EIA and reply documents. If the project starts construction five years after the EIA is approved, whether to re-submit the EIA.
C. check whether the environmental protection completion acceptance has been carried out after the project is put into operation. Whether the environmental protection completion acceptance procedures are complete.
D. production workshop: whether the floor of the workshop with excessive or raw materials containing acid, alkali and other corrosive substances is treated with anti-corrosion and maintained regularly. Whether there is any leakage in the production process.
e. check the application for pollutant discharge permit, the implementation of pollutant discharge declaration and the implementation of pollutant discharge fee payment
if there is no relevant pollutant discharge link (such as the impact of the link on groundwater, etc.) in the on-site inspection of the enterprise, the inspection is not required.
environmental protection supervision and law enforcement mainly includes eight aspects:
1. sewage pollution control inspector
1. environmental monitoring of water pollution sources
operation status, historical operation, treatment capacity and treatment capacity of sewage treatment facilities, quality management of wastewater, treatment effect, sludge treatment and disposal. Whether to establish a ledger for the operation of wastewater facilities (key time of sewage treatment facilities, daily wastewater inflow and outflow, water quality, dosing and maintenance records). )
2. sewage outfalls Supervision
1) Check whether sewage outfalls's position is in compliance with the regulations;
2) Check whether the number of sewage outfalls of polluters meets the relevant regulations;
3) Check whether monitoring sampling points are set according to relevant pollutant discharge standards and regulations;
4) check whether a standardized flow measuring section is set to facilitate the measurement of flow and velocity.
5) Check the general sewage outlet and set up environmental protection signs;
6) check whether online monitoring and monitoring equipment are set as required.
3. Displacement recheck
1) If there are flow meters and pollution source monitoring equipment, check the operation records;
2) If there is a water supply device or a water supply consumption certificate, the displacement is calculated according to the water consumption;
3) if there is no metering number and valid water consumption certificate, the number of water drainage systems of similar enterprises given in relevant national standards and manuals shall be estimated.
4. Discharge water quality
1) Check that the quality of the discharged wastewater meets the requirements of national or local pollutant discharge standards.
2) check the models and specifications of monitoring instruments, meters and equipment, as well as the verification and calibration.
3) check the monitoring and analysis methods and water quality monitoring records. On-site monitoring or sampling can be carried out if necessary.
4) check the rain and sewage diversion, and check whether the sewage disposal unit implements the clean-up and rain and sewage diversion
5. Emergency disposal facilities for accident wastewater
1) Whether the emergency disposal facilities for accident wastewater of sewage disposal enterprises are complete and whether it can ensure the interception, storage and treatment of wastewater generated in environmental pollution accidents.
2) Check the reuse of treated wastewater
2. Check the waste gas pollution
Check the operation status, historical operation, treatment capacity and capacity of waste gas treatment facilities.
1, boiler, petrochemical, chemical and other combustion waste gas inspection
1) Check whether the continuous production of combustible organic waste gas by chemical and petrochemical enterprises is reasonable, adopt recycling or incineration, and whether it is reasonable to treat the intermittent production of combustible organic waste gas by incineration, adsorption or combined processes.
2) check the certification procedures and performance indicators of boiler combustion equipment, check the operation status of combustion equipment, check the control of sulfur dioxide and nitrogen oxides.
2. Pollution sources of process waste gas, dust and odor
1) Check whether the emission of waste gas, dust and odor meets the requirements of relevant pollutant emission standards;
2) check the recycling of combustible gas;
3) check the environmental protection measures for transportation, loading and unloading and storage that can emit toxic and harmful gases and dust;
3. Air pollution prevention and control facilities
Dust removal, desulfurization, out-of-stock and other gaseous pollutants purification systems
4. Exhaust gas outlet
1) Check whether the polluter has built new exhaust pipes in the area where new exhaust pipes are prohibited;
2) check whether the height of the exhaust pipe meets the national or local pollutant discharge standards;
3) check whether the exhaust duct is provided with sampling holes and sampling monitoring platforms;
4) check whether the exhaust port is set according to the required specifications (height, sampling port, signboard, etc.), and whether the required exhaust gas is installed and practical online monitoring facilities according to the environmental protection department.
5, unorganized emission source
1) For the unorganized emission point of toxic and harmful gases, dust, smoke and dust, if it is possible to achieve organized emission, check whether the pollutant discharge unit has carried out rectification and implemented organized emission;
2) check the dust in coal yard, yard, goods and construction production, and whether measures to prevent dust pollution have been taken or dust prevention equipment has been set up as required;
3) Monitor at the enterprise boundary to check whether unorganized emissions meet the requirements of relevant environmental protection standards.
3. On-site inspection of solid waste pollution sources
1. Inspect the source of solid waste
1. Check the type, quantity, physical and chemical properties and generation mode of solid waste.
2) Check the types and quantities of hazardous wastes in production according to the new National Hazardous Waste List or GB585
2. Storage, treatment and disposal of solid wastes
1) Check whether the polluters are in nature reserves, scenic spots, drinking water source protection areas, basic farmland protection areas and other areas that need special protection. Assume that the facilities and places for centralized storage and disposal of industrial solid waste and domestic waste landfill
2) Check whether the solid waste storage facilities or storage yards are equipped with facilities that meet the requirements of environmental protection
3. For the storage, treatment and disposal of hazardous waste
Check whether the polluters dump solid waste into rivers, Hu Bo, canals, channels, reservoirs, beaches and bank slopes below the highest water level, etc.
4. solid waste transfer
1) check the situation of solid waste transfer
2) check whether the hazardous waste transfer form is filled in if hazardous waste is transferred. It has been approved by the competent environmental protection department of the local people's government at or above the municipal level who moved out of the district and by the competent environmental protection department of the local people's government at or above the municipal level in the receiving community.
3) check whether the solid waste and hazardous waste signs are set.
4) check the sludge disposal contract, sludge transportation weighing records, etc. to determine whether the sludge production is reasonable.
iv. On-site inspection of noise pollution sources
Whether pollution control facilities are set up according to EIA documents or EIA approval requirements, and whether the noise meets the standards.
V. On-site inspection of groundwater pollution
1) Whether the site sewage treatment facilities (units), heavy-duty links, solid waste (hazardous waste) stacking places, chemical stacking places, etc. have taken anti-leakage and putrefaction measures.
2) if there is groundwater pollution, whether the control measures are in place.
VI. On-site inspection of environmental risks and emergency plans
1) Check the compilation, evaluation and preparation of emergency plans, and attach the words, pictures and relevant materials of the emergency drills.
2) whether the project meets the requirements of environmental protection, such as the initial rain pool (such as chemical industry, electroplating, printing and dyeing, heavy-duty industries) and emergency accident pool.
3) Emergency material reserves (name, quantity, expiration date, etc.)
VII. On-site inspection of ecological environment
VIII. The need for environmental protection department inspectors to investigate and deal with environmental violations
The need to investigate, transfer and supervise complaints and reports on environmental pollution and ecological damage has attracted great attention. It's not easy to get away with a fine.
-end-
If you think the content is good, don't forget to forward it. Of course, if you are interested in something or have any suggestions for us, you can leave a message and tell us. I'm here, waiting for your news ~ ~ ~