What are the main devices that go into assembling an atomizer for home use? Is it complicated?

Whether it is tube type, or transistor type ultrasonic nebulizer basically consists of four major components, namely: power supply circuit, high frequency generator, atomizing cylinder, cooling air supply device and circuit. Some ultrasonic atomizers are also designed with water level, water temperature self-control alarm circuit. In the tube type ultrasonic nebulizer power supply circuit, the line is different, some of the 220V utility voltage after boosting the double voltage, or directly after the utility triple voltage for the tubes to provide 600V or 700V or so of the screen voltage and 300V or so of the gate voltage. The transistorized ultrasonic nebulizer power supply circuit is the 220V utility voltage step-down rectifier for about 40V DC voltage, the power supply circuit is the source of energy to supply the high-frequency generator, high-frequency generator oscillation frequency is based on the piezoelectric wafer's intrinsic frequency to the design of the general selection of the 1. 4MHZ-1. 7MHZ between. High-frequency generator output of high-frequency electrical energy added to the positive and negative poles of the piezoelectric wafer, the piezoelectric wafer will produce mechanical oscillation, so that high-frequency electrical energy through the piezoelectric wafer into ultrasonic waves along the wafer thickness direction. Due to the ultrasonic wave has the destructive liquid inertia and surface tension and produce cavitation, when the liquefied surface tension wave is enough, it will fly out the aerosol in the wave peak. Ultrasonic atomizer structure and working principle is this.