Integrated water purifier is a collection of flocculation, sedimentation, sewage, backwash, catchment filtration and other processes of the essence of the great, without the need for personnel operation to achieve a single fully automated operation of the series of water purification devices, is to achieve the automation of the management of the water plant is an important unit, coupled with the production of the plant's automatic dosing devices and disinfection equipment, you can be a Water purification station (plant) with a full set of functions. Thoroughly discharging integrated water purifier is not only applicable to a wide range of good treatment effect, excellent water quality, and self-consumption of less water, power consumption, small footprint, water, electricity, labor, can save auxiliary pumps and facilities of the new energy-saving new products.
Second, thoroughly drain integrated water purifier design parameters
1, applicable to raw water turbidity: ≤ 3000mg / L
2, applicable to the raw water temperature: room temperature
3, turbidity of water purification water: ≤ 3mg / L
4, sedimentation area design surface load: 7 ~ 8M3 / H - M2
5, filtration area Designed filtration rate: 8～10M/H
6, the intensity of the filter tank rinsing: 14～16L/S-M2
7, rinsing time: t=4～6mim (adjustable)
8, the total retention time: T total=40～45mim
9, the inlet water pressure: ≈0.06MPa
Three, thorough sludge discharge type integrated Water purifier application instructions
1, suitable for water turbidity less than 3000mg / L of various types of rivers, rivers, lakes, reservoirs, etc. as a source of water in rural areas, towns, industrial and mining enterprises of the water plant, as the main water purification and treatment devices.
2, for low temperature, low turbidity, seasonal algae lake water source, has its special adaptability.
3, for high purity water, beverage industry water, boiler water, etc. as a pre-water treatment pre-treatment equipment.
4, used in all kinds of industrial circulating water system, can effectively and substantially improve the quality of circulating water.
5, used in the waterway system, sewage plant effluent as a source of water, for clean water reuse treatment equipment.
Four, thoroughly discharge integrated water purifier main features
1, in addition to the management of the primary pumping station and dosing system, the water purification device itself from the reaction, flocculation, sedimentation, set mud, mud, a series of operating procedures such as mud collection, water collection, water distribution, filtration, backwash, sewage, etc., to meet the requirements of the automatic operation of the duty officer as long as the regular water quality monitoring and measurement, without the need to operate and manage water purification devices. The device is operated and managed without the need for water purification.
2, high concentration of flocculation layer, can make the impurity particles in the raw water, in which the collision between the full contact, adsorption rate, and therefore can adapt to a variety of raw water temperature and turbidity, the removal rate of impurity particles is high.
3, swift mud slag concentration room and adjustable automatic sludge discharge system, can ensure that the excess mud slag impurities in a timely manner, so as to ensure a stable removal rate of impurity particles.
4, efficient flocculation and sedimentation effect, so that the precipitation water quality has been maintained in good condition.
5, novel and original water collection system and the lowest head of water collection, so that the water collection is more uniform and effective, not only to improve the volume utilization factor, because of its very small head of water collection, the cumulative power saving effect is considerable.
6, the water purification system automation, not only to ensure the high efficiency of the water purification system filtration, but also automatic backwashing, without the need to set up a separate backwash pump or air compressor and other electrical equipment, can save a lot of infrastructure investment and daily operation, repair and maintenance costs.
7, low self-consumption rate of about <5% or so, to save limited water resources plays a positive role.
8, covers an area of small, compared with the general water purification structures, can save more than <50% of the area, the height of about 4.10 meters, indoor and outdoor can be placed.
9, easy to expand, remodel, reuse, easy to relocate or easy to reuse.
The above structures can be built according to the specific circumstances after the merger, in the absence of a water tower, can be used Liao Jing manufacturing production of automatic pneumatic water supply, auxiliary equipment, dosing devices and disinfection equipment are Liao Jing manufacturing company to provide.
Fifth, thoroughly drain integrated water purifier installation and maintenance
1, integrated water purifier for the whole water purification unit, placed in accordance with the design requirements of the poured into the foundation, connected to the inlet pipe and outlet pipe, can be put into operation.
2, the inlet pipe must be installed flow meter.