What is the difference between monocrystalline copper money and silver-plated wire tones, high people answer

Copper wire for high, medium and low frequency transmission is more uniform, but ordinary copper magazines are also more, not suitable for the production of audio signal transmission line, more than 20 years ago, Japan used oxygen-free copper OFC, due to the reduction of impurities, the sound tends to be clear and transparent, but unfavorable to the low-frequency, so with the smelting and annealing method of improvement, and then appeared in the large crystal oxygen-free copper LCOCC and monocrystalline oxygen-free copper PCOCC and so on, so that the sound is more balanced. The sound of silver wire, because of its low impedance to high frequencies, so the transmission of high frequencies is better than copper, but sometimes excessive, low-frequency performance is average. The theoretical basis of silver-plated wire is the skin effect and the best conductivity of silver, but the electrons may not all tend to the conductor surface, and the electrons across the interface between silver and copper, the conductive quality may deteriorate, such as if the silver-plated quality is not as good as pure copper wire. The deterioration of the performance of the metal signal wire originates from the chemical reaction, so the conductor made with chemical silver plating method is not good, in a mechanical way in the copper wire outside of the wire wrapped in silver is better View original post>>