Safety is no small matter, "electrocution" seems to be far from our lives, but no matter whether it is maintenance personnel or managers need to know the hazards of electrocution, the following I summarize the "electrocution emergency drill activity summary sample (generic 7)". "I hope it will help.
Part I: summary of emergency drill activities for electrocutionIn order to improve the ability of the project department to respond to emergencies, effectively dispose of unexpected accidents, eliminate the hazards of electrocution in the construction process, workers, managers can quickly, orderly and correctly respond to the special situation, the establishment and improvement of a scientific, effective and well-functioning emergency rescue system, to test the effectiveness of the emergency departments in the field, the organization of the project department of electrocution The project department has organized and carried out the emergency rescue drill of electric shock accident. Now the electric shock accident drill results are reported as follows:
First, the purpose of the drill
Implementation of the "safety first, prevention first, comprehensive management" policy, the establishment and improvement of the project emergency management system, the formation of a unified leadership, response in a timely manner, Establish and improve the emergency management system of the project department, form a unified leadership, timely response, scientific decision-making, disposal of the emergency system in an orderly manner, and comprehensively enhance the ability of the project department to deal with emergencies and risks. Through the set accident emergency drill, test the feasibility and operability of the project department accident emergency rescue plan, improve the emergency team emergency rescue ability, and constantly improve the overall level of the project department's emergency rescue work, and effectively safeguard the project department employees' life and property safety.
Second, the drill time and place
XX-XX XX XX site. On-site workers found immediately after shouting, followed by XX immediately cut off the power, the scene commander XX immediately organize personnel rescue; after cardiac resuscitation and other measures close to 10min of first aid, electrocution personnel XX finally woke up, out of danger, and was sent to XX People's Hospital to receive further observation and treatment. The scene for this accident on-site safety education will be summarized.
Rehearsal details process:
XX time, the project department management personnel Shenmou site electrocution accident;
XX time, employee XX found Shenmou electrocution, immediately with an insulated stick will be the power cord away from the electrocuted and shouted for help, XX heard the shouting and immediately pull down the electric switch, XX with a finger to see electrocution XX breathing, found XX still breathing, and immediately organize the personnel with a pinch, cardiac arrest, and then immediately pull down the electric gate. XX with his fingers to see if the electrocuted XX breathing, found XX still breathing, immediately organize personnel with pinch, cardiac resuscitation and other methods of first aid to the injured;
XX time, the emergency rescue vehicle was notified to prepare for rushing to the scene of the accident;
XX time, rebar processing plant personnel to the emergency commander reported;
XX time, the emergency rescue vehicle rushed to the scene immediately arranged for the personnel will be injured to the ambulance to the hospital for examination and treatment;
XX At that time, the drill ended.
Fifth, the overall evaluation of the exercise
After the end of the exercise, members of the evaluation team and the relevant participants in the scene held a summary meeting, the meeting of the entire exercise process and participants in the overall evaluation.
Assessment that:
1, the drill has achieved the expected effect of the plan to improve the emergency response capabilities of the units;
2, the drill organization and implementation of the completion of a better, smooth interface work, the content and the plan is accurate, the on-site order and rescue operations are effective and successful completion;
3, the entire drill action is fluent, the scene is more realistic, emergency response Personnel action quickly, should be the rescue vehicle arrived in time;
4, on-site observers through the exercise can basically grasp the first aid first aid knowledge of electrocution, to achieve the expected educational effect;
5, the units participating in the exercise are well-prepared;
6, the problems in the process of the exercise and to be improved:
The exercise did not set up a conspicuous exercise process, so that the operating personnel mistakenly believe that they are the first time in the exercise, but also the first time in the exercise. Signs, so that the operating personnel mistakenly believe that an accident has occurred, causing panic in the local area, to be improved.
Overall evaluation: the drill was successful, the accident occurred at all levels of the emergency organization in accordance with the process of smooth start, the measures and actions accurately and quickly in place, there are problems need to be further improved.
Part II: Summary of emergency drill activities for electrocutionSince XX month, in order to reduce the project department's safety accidents, eliminate safety hazards, and implement the policy of "safety first, prevention first, comprehensive management", my project department under the leadership of the safety committee to actively carry out a variety of safety activities, such as: on the safety education class, issue of safety books, safety knowledge contests. Under the leadership of the safety committee, our project department actively carries out various safety activities, such as: safety education classes, distribution of safety books, safety knowledge contests, safety education videos, safety pictures, drawings, examples, fire drills, electrocution rescue drills and so on. Recently, in order to improve the ability of laboratory and other staff engaged in high and low voltage electricity to deal with sudden electrocution accidents, an electrocution first-aid drill was held which was organized by the safety commissioner of the project department and participated by all departments of the project department, laboratory and other related departments. Before the start of the drill the participants first meeting to determine their respective roles in the accident drill, clear their responsibilities.
The drill set the accident occurred in the XX test room, a tester in the test process suddenly electrocuted unconscious, neighboring testers immediately cut off the power supply, and call 120 emergency telephone for help, while reporting the person in charge of the test room, the project manager, the project department safety personnel. The leaders rushed to the scene at the first time to direct the rescue, and do a good job of protecting the scene, and assigned personnel to the company's door to guide the arrangement of ambulance vehicles. At the same time, the rest of the personnel immediately detach the injured from the electrified body, and use two tops to make a simple stretcher to carry it to a ventilated place, check the breathing and pulse of the injured to determine their injuries, and immediately carry out chest compressions and mouth-to-mouth artificial respiration to rescue them. After the arrival of the ambulance, the relevant personnel briefly introduced the accident to the ambulance crew, initially judged the injured person's injury and the first aid measures taken, the ambulance crew checked the injured person, judged his injuries and started resuscitation, and decided to send him to the hospital for further treatment according to the situation. After dealing with the emergency, the aftermath of the work is also carried out in an orderly manner: test personnel to pull off the total power supply, overhaul the test equipment, repair damaged equipment, facilities, and eliminate potential safety hazards; project safety personnel and other relevant departments responsible for the composition of the accident investigation team, ask the relevant personnel to analyze the cause of the accident, dealing with related issues, the rest of the personnel on the drill feel and think about the warm exchanges.
After the successful completion of the drill, the participants exchanged knowledge and experience learned from the accident drill, summarizing how to deal with such accidents if they really happen, as well as the need for improvement and enhancement.
In this drill, each employee learned the correct measures to deal with electrocution first aid accidents: find someone electrocuted, first disconnect the electricity and make it out of the electrified body, and then carry out rescue, and at the same time, call for help and report to the relevant leaders to protect the scene of the accident; first aid chest compressions and mouth-to-mouth artificial respiration should be correct and effective method. After the accident, we should find out the cause of the accident in a timely manner to formulate corrective measures and implement them to prevent the recurrence of such accidents.
Through this drill, we y appreciate the company's determination to improve production safety, production safety is related to the company's development prospects, production costs, working environment, physical and mental health of employees, production safety is no longer a verbal requirement, or stay in the written education, has been implemented into the actual operation; through a variety of drills, so that each of our employees have to deal with unexpected accidents in the Emergency response capability. Similarly, each of our employees should consciously abide by the company's various safety production procedures and systems, after a variety of safety education and drills, to do "not to harm themselves, not to harm others, not to be harmed by others" to achieve "safe production, everyone is responsible for".
Part III: summary of emergency drills for electrocutionXX province XX power limited liability company, a staff member, in the repair of 10kV brick factory line electrocution fatal accident. I have made a detailed study of the accident, the heart infinite feelings at the same time, also sounded the alarm.
We all know that the "Electricity Safety Regulations" is written in blood and tears of the pioneers, but in this history of blood and tears released and vigorously organized to learn to master so many years, there is still a tragedy that should not happen. Until today such accidents are still happening. This accident is a serious violation of the Guizhou Power Grid Company safety production ban stipulates "strictly prohibit the operation of the ground without closure" "strictly prohibit unauthorized command". The accident is still happening. Each accident in retrospect, seem so stupid, seemingly should not have made the mistake but repeated tragedies staged, the source of this is because of their own lack of attention to safety, there is always a fluke, habitual violation of the rules, the occurrence of accidents are too far away, in fact, the danger of which at any time outbreak.
The power industry itself is a high-risk industry, especially the first-line employees at any time at risk of life and limb types of work. This accident tells us that we should spend a little more time to do a good job of analyzing the danger points before the work in the future, and eliminate habitual violations. This will not take too much time, but if this step is missing, the work process and serious violations, then there is no time, want to regret have no chance.
As a dispatcher of a watchman, but also know the importance of scheduling instructions, this accident also reminds me in the future scheduling work, instructions must be careful, and to get the other side of the exact return, in the adoption of safety measures must be verified whether to install the closed ground, to put a good safety of any one of the gates. In the blackout should also verify that the line staff line whether there is a power user, and should inform them that the line is manned work, prohibited to the line back to send power.
As the scheduling to notify the coal mines and hydropower stations to prepare for the blackout, and to verify that the switch connected to the main grid has been in a cold standby state, will not be to the line back to send power and so on. This a gateway to keep good, then the accident will be reduced a lot. Of course, we want to improve our safety awareness is not only only these contents, there are many details to pay attention to, especially to eliminate the operation of no ticket, major misoperation and so on the occurrence of things, each time before ordering to think clearly, clear thinking in order to ensure that the power grid, personal, equipment safety.
Through this blood lesson, we should once again strengthen their safety awareness, "safety first, prevention first", all accidents can be prevented, as long as we carefully implement the relevant safety regulations of the electrical industry, the provisions of those who will understand, master, and in the work of the strict implementation of the same error will not happen again.
Part IV: Summary of emergency drills for electrocutionAt present, we have organized to study the "XX Municipal Power Supply Company XX personal electrocution accident", "XX Power Supply Bureau XX misoperation accident", "XX Power Supply Bureau 110kv Fuyuan substation XX personal electrocution accident" of the safety accident notification, the main reason for the accident is that the staff did not conscientiously carry out the safety operating procedures, do not operate according to the rules, the person in charge of the work site management is not in place.
The occurrence of these three accidents, exposing a series of problems in safety management, highlighting the staff's unclear safety responsibilities, the scene does not survey, the operators lack of basic safety skills. Facts have proved that if the danger point is not predicted, not prevented and controlled, then under certain conditions, it may evolve into an accident, the consequences are unimaginable. Through the study, we have strengthened the awareness of safety production, safety production should adhere to the "safety first, prevention first" idea, and effectively into the daily work. The occurrence of these three accidents, so that each employee's heart is very painful, happened to them, as happened to us, painful lessons, only serious thinking, reflection.
Through the study, the experience is as follows:
1, three accidents fully exposed the problem is: "against the rules, paralysis, irresponsible", the three violations of the behavior is barbaric behavior, do not set up a solid sense of security, only trying to save trouble, fast when the stock of the mentality of luck, fear of trouble, which is inevitable that the accident occurred.
2, the operator serious violations, is the main cause of accidents, do not test the electricity does not hang the grounding wire, no security measures to protect the situation on the operation, a serious violation of the "Safe Working Procedures" and to protect the safety of the technical measures, which is also inevitable that accidents.
3, the lack of system, the lack of management. ? Strictly not up, implementation does not go down, poor implementation, and in the inspection only report the good news not to report the bad news, the usual management of the equipment is not in place in the elimination of defects and not in time to determine the defects and inaccurate, the daily inspection work is not serious, resulting in the existence of insecure factors that lead to the occurrence of accidents.
4, risk management is a formality, there are chapters do not follow, there are rules do not comply with, work impatiently, operators on-site operation is not in accordance with the requirements of the implementation of the hazardous point control measures are false.
5, in the work of the safety management system and safety measures are not implemented, staff safety awareness, safety learning in form. ? Through the study we reflect a lot, a lot, we should be profoundly learn from the lessons, against the "safe work regulations", combined with our company's actual safety production and production safety rules and regulations, in the future work to strengthen the safety of technical training and anti-accident drills, the whole process of management of the equipment, and seriously study the accident notification, and strive to improve our business skills and safety awareness. To achieve safety is no small matter, build a firm line of defense, a long time to grasp, alarm bells ringing, for the company's production safety work to do a good job, do a good job, make new results.
Part V: Summary of emergency drill activities for electrocutionMy project department responded to the call of the higher security department to improve the fire awareness of the whole staff, enhance the staff's resilience in emergencies, self-protection ability, so that each employee masters a certain degree of knowledge of the prevention of electrocution, to eliminate the hidden dangers of electrocution. The project department held an emergency drill of electric shock.
The drill is summarized as follows:
I. Achievements
The safety awareness of all employees has been improved, and there is a further understanding of the general knowledge of electricity safety. The ability to respond to emergencies has been improved, the drill site most employees can effectively organize, quickly respond to the alarm of electric shock, most of the rescue team leader can effectively organize the group members to evacuate, alert and put into the rescue operation. There is a certain improvement to the future response to emergencies. ? Before the drill, my project personnel first organized a collective study of the methods of electrocution rescue and related content, so that the site personnel to master a certain degree of rescue knowledge, enhance the staff's ability to adapt to emergencies, self-protection, and vigorously publicize the importance of safe use of electricity. ? During the drill, the team cohesion of the employees was sublimated. The organization ability, command ability and emergency response ability of the emergency leading group were also exercised. Basically achieved the purpose of the anti-electrocution drill.
Second, the shortcomings
A small number of employees safety awareness is not strong enough, the rescue method is not quite right, the response to the accident is not timely.
Third, the follow-up work arrangements
Reduce the loss of accidents to the company is the obligation and responsibility of each employee. The company's employees and managers at all levels must closely cooperate with the handling of emergencies, once received the instructions to deal with emergencies, in the case of ensuring their own safety to be obliged to quickly implement. No excuse to shirk their responsibilities or refuse to implement. So that our company is a big family, a fighting force and execution of the collective. In the future emergency activities to improve the above shortcomings, and further strengthen the training and publicity of emergency work. Enhance the feasibility of the emergency plan. Ensure that the rescue groups in future emergencies in place in a timely manner and in the rescue process how to ensure the safety of personnel and equipment in the disaster relief.
Through this electrocution drill, to further enhance the general staff's awareness of safety precautions and self-help ability to understand and master the basic knowledge of the prevention of electrocution, so that in future sudden accidents to achieve rapid, orderly, timely and effective results. We will regularly carry out training or drills to improve the skills and overall quality of employees, effectively reduce the accident hazards, reduce accident losses, to ensure the company's safe, healthy and orderly development.
Article 6: Summary of emergency drill activities in the event of electric shockFirst, the drill objectives
Strengthening of Xinbang property safety work, adhere to the "safety first, prevention first, all hands on deck, comprehensive management" policy, in order to "I can safety" foundation strengthening year. I can safety" foundation strengthening year activities as a carrier to "my safety I am responsible for, team safety I have responsibility, the company's safety I am responsible for" safety culture as the lead in order to improve the property of Xinbang all the staff emergency rescue capabilities, minimize the loss of accidents and save the lives of injured employees, and strive to rescue the injured staff in the first time. Strive to save the lives of injured people and the company's property safety in the first time, and combined with the actual situation of production safety, especially the development of electrocution first aid drills.
Second, the time and place :
XX in XX XX underground garage
Third, the organization
Electricity first aid drill program commander-in-chief and the person in charge of the scene: XX? Emergency first-aid team members: XX. accident handling division of labor: ? Accident treatment team: team leader: XX Medical rescue team: team leader: XX Alert liaison team: team leader: XX Dongying Xinbang Property Management Co. Logistical support group: team leader: XX?
1, vigilance liaison group should carefully and in detail record the time of the exercise, reporting time, personnel injuries, the situation of the site personnel.
2, logistics support group in the day of the exercise must ensure that between the exercise to transport personnel and materials to the exercise site, emergency funds and logistics-related material arrangements in place.
3, the rescue personnel to arrive at the scene in the shortest possible time, rescue personnel arrived at the scene of the accident, listen to the orders of the command, carry out first aid work. After the rescue is over, all the people will be taken out of the accident scene and evacuated to the safe area.
4, the site commander announced the end of the exercise, all the exercise personnel withdrew from the exercise site, to restore production order.
Fourth, the drill program
1, the commander-in-chief announced the start of the drill.
2, workers XX to the commander-in-chief report: XX for the drainage cover welding, due to the welding machine insulation aging leakage led to the company's employees XX electrocution fell to the ground in a very critical situation. Currently has become a shock coma.
3, the commander-in-chief announced the start of the emergency plan orders, arrangements for the task and the first-aid drill on electrocution guidance.
4, rescue content ? Alert contact group: Shang Lifeng immediately alarm, protect the scene and establish emergency channels. Medical rescue team: XX timely electrocution first aid operation steps include: "judgment (see, listen, try), open airway, mouth-to-mouth (nose) artificial respiration, chest heart compression," etc., the ambulance arrived at the scene of the rescue casualty sent to the hospital.
Fifth, the problems and shortcomings of the drill
Through this drill, so that the company's employees on-site to participate in the occurrence of electrocution accidents and master the processing steps and common sense of dealing with the situation; to achieve once the construction site of a real sudden electrocution accidents in the organization of rescue, timely control of the situation and to reduce the loss of the aspects of emergency preparedness to deal with the expected purpose. Handling of the expected purpose. To promote self-prevention, safe production has played a role in ensuring.
But this drill has deficiencies: such as electrocution accident scene imitation degree is not enough, 110, 120 are not prepared, failed to reflect the real scene. The cooperation and coordination between the rescue team should be further strengthened, the speed of the drill, the action is not in place, some of the main details do not reflect the emergency a little panic. Part of the drill personnel are not serious, not enough material preparation, rescue the injured is not skillful and so on.
Part VII: Summary of emergency drill activities in the event of electric shockFirst, the purpose of the drill
Implementation of the "safety first, prevention first, comprehensive management" policy, the establishment and improvement of the workshop emergency management system, the formation of a unified leadership, timely response, The establishment and improvement of the workshop emergency management system, the formation of a unified leadership, timely response, scientific decision-making, disposal of the emergency system in an orderly manner, to enhance the workshop to deal with emergencies and risk capacity. Through the set accident emergency drill, test the feasibility and operability of the workshop accident emergency rescue plan, improve the emergency team emergency rescue ability, and constantly improve the overall level of workshop emergency rescue work, and effectively protect the workshop staff life and property safety.
Second, the drill time
xx-xx on xx-xx.
Third, the drill place
XX workshop.
Fourth, the exercise scene description
Incident set: XX, XX, XX, XX afternoon XX, electrician class two employees XX, in the coal mining machine dismantling area with the work, the employee XX in the troubleshooting of the continuous mining machine electrical failure, resulting in 1140V high voltage electrocution, was knocked to the ground, unconscious on the spot.
Walkthrough details process:
XX employee xx in the coal mining machine dismantling area electrocution accident.
XX employee xx found xx suspected electrocution, immediately shouted for help, at the same time disconnecting the power circuit breaker of the continuous mining machine, notify the electrician to request the disconnection of the 1140V combination switch power supply.
XX electrician xx disconnect the workshop 1140V combination switch power supply, electrician xx disconnect the distribution room 1140V combination switch power supply, report the accident to the workshop manager xx.
XX manager xx issued a first aid order, informed the deputy manager xx, rushed to the scene to organize rescue.
XXxx notifies the first aiders of the electrocution accident and calls 120 emergency.
XX first aiders xx arrived at the scene, the injured person CPR first aid, bandage trauma.
XXxx was notified of the arrival at the scene, pulled up a cordon, maintained order at the scene, and xx went outside the workshop to meet the emergency vehicle.
XXxx was notified to arrive at the scene with a stretcher.
XX ambulance arrived at the scene, xx with a stretcher to carry the injured into the ambulance, sent to the hospital.
XX The drill site ends.
V. Overall evaluation of the exercise
After the exercise, the deputy director of the center XX and the workshop XX manager organized a summary meeting of all participants, the entire exercise process and participants in the overall evaluation. Assessment that:
1, the exercise has achieved the expected effect of the plan to improve the emergency response capabilities of the units;
2, the exercise organization and implementation of the completion of a better, smooth interface work, the content and the plan is accurate, on-site order and rescue operations are effective and successful completion;
3, the entire exercise action is fluent, the scene is more realistic, the emergency response personnel move quickly, the rescue personnel professional in place;
3, the entire exercise action is fluent, the scene is more realistic, emergency personnel move quickly, the Rescue personnel professional in place;
4, on-site observers through the exercise can basically grasp the first aid first aid knowledge of electrocution, to achieve the expected educational effect;
5, the units participating in the exercise are well-prepared;
6, the exercise process of the problems and to be improved:
(1) *** with the operators in the case of electrocution without determining how the electrocuted person The situation is not sure how the electrocuted person is injured, the equipment is disconnected, may trigger the series electrocution, there is a potential safety hazard;
(2) first aid personnel should be the first time to arrive at the scene of the incident when they hear the shouting or notification, in order to ensure their own safety, first aid to the injured, and make every effort to save the injured in the golden first aid time;
(3) the first aid personnel should be a solid grasp of the first aid skills to avoid using the wrong first aid when the accident occurs, in order to avoid using the wrong first aid skills when the accident occurs, in order to avoid using the wrong first aid skills when the accident occurs. (3) First-aiders should have a solid grasp of first-aid skills to avoid using the wrong first-aid methods in the event of an accident.
Overall evaluation: the exercise was successful, the accident occurred at all levels of the emergency organization in accordance with the process of smooth start, the measures and actions accurately and quickly in place, there are problems need to be further improved.