Research and study program on water conservation

Beijing's water conservation target for 2005 is 40 million cubic meters. Jiao Zhizhong, director of the Municipal Water Affairs Bureau, announced seven major water conservation programs: first, new and expanded projects must be installed at the same time as the water utilization facilities, and metering management should be fully implemented; second, the industry should formulate water consumption quotas, and water supply agreements should be signed by large households with annual water consumption of more than one million tons; third, the water consumption target of social units should be compressed by another 10%; fourth, the Completion of 35 industrial water-saving technological transformation, Yizhuang to build a water-saving demonstration area; Fifth, the popularization of residential water-saving appliances, 50% of households to switch to water-saving appliances within the year; Sixth, the installation of 100 kilometers of new water pipelines within the year to expand the range of water users; Seventh, the continued selection of water-saving models, every citizen can strive to be a model of water conservation.

Enterprise water conservation program

We designed a set of water conservation program for the enterprise, the implementation of this program (or take this program of measures), we ensure that you receive a very good effect of water conservation, for you to save energy, reduce spending, reduce labor, thereby improving efficiency, can receive twice the result with half the effort.

The first step: water balance test, which is the most scientific way to find out the enterprise (unit) water situation. After the water balance test, the unit of the upper and lower pipe network, the number of water appliances, the use of water, daily, monthly, annual water consumption, the water points (such as boilers, baths, flushing, swimming, etc.) of the water supply profile can be clear through the test, and through the analysis of water consumption data, to find out the reasons for the use of water is unreasonable, so that the corresponding measures can be taken. To carry out water balance test specific methods and steps please visit the website "water balance test" section.

The second step: to scientific management of water. The development of scientific water use system, to take the target decomposition, responsibility to the person, the savings award over the penalty and other measures to fully mobilize the enthusiasm of people. This is the basis of water conservation work. Specific experience is welcome to the "Northern Transportation Energy Conservation Service Center" to visit and learn.

The third step: to science and technology to water, the use of water-saving appliances, so that the phenomenon of water waste becomes impossible. Specific methods are described as follows:

1. The use of ceramic chips, variable distance, self-closing and other non-leakage, with high-tech content of the faucet, this type of nozzle not only non-leakage, long service life, and variable distance, self-closing, etc. also has a short open and close time to prevent the loss of water, water pressure, self-closing and so on, and there are three years of warranty period.

2. The urinal (bucket) adopts infrared water-saving controllers, so that people flow, people go water stops, not only to achieve the effect of rinsing clean, odorless, and can save water more than 70%.

3. The stool squatting pit adopts foot valve, which is not only hygienic but also easy to use. The high box can use "Wufang" brand high box fittings, large and small stools with different flush volume, water saving up to 50%.

4. Watering lawn using "micro-sprinkler system". Micro-sprinkler can save 80% water than diffuse irrigation, and 50% water than ordinary large spray, and it has low cost and long service life.

5. Bathroom shower using "diaphragm foot shower", this shower from the root to eliminate the drip, leakage phenomenon, the use of the effect is very good.

6. Swimming pools use circulating water treatment equipment, basically no need to replenish water.

7. Construction of "water treatment project". Dirty water such as bathing sewage, laundry water, dishwashing water, flushing water, etc. is collected and filtered, precipitated, biochemical, disinfected and other steps are carried out through the water treatment station to turn it into water that can be used twice. The treated water can be used for watering green areas, flushing cars, spraying playgrounds, flushing toilets and so on. General units to build a water treatment station does not cost much, but the results are great, especially in the rising cost of water today, it is indeed very cost-effective.

Home water conservation program

We designed a set of water conservation program for the family, the implementation of this program (or to take this program of measures), we ensure that you receive a very good effect of water conservation, for you to save energy, reduce spending, and at the same time to reduce unnecessary trouble (such as leaks, noisy, flooded furniture, etc.).

For families, there is generally no casual waste of water, after all, is to pay out of their own pockets? The main problem is that the first is not strong awareness of water conservation, the second is the backwardness of water appliances, and the third is that I do not know what water-saving devices, where to go to buy. The following are some of the matters of the family with water-saving appliances.

One, toilet water conservation: according to statistics, toilet water accounted for more than 50% of household water consumption, the main reason is that the structure is unreasonable, water waste. Toilet according to the capacity of 15 liters, 9 liters, 6 liters of three kinds, 15 liters of the country has been ordered out, and now vigorously promote the 6-liter toilet, but because the 6-liter toilet is a systematic project (involving the structure of the bucket, the smoothness of the material, the angle of inclination, etc.), the new building can be used, and the old building toilet renovation can not be done because of the small amount of water, it is difficult to flush clean, but instead of the user to bring trouble. According to the structure can be divided into straight down type, flap type, siphon type, hydraulic type, differential pressure type. The straight down type has been eliminated by the state, most users now use the flap type. The new toilet has a combination of siphon and differential pressure, as well as large and small stool stalls, stool with a large water stall, small stool with a small water stall, so as to achieve the purpose of water conservation. So how to do the toilet water saving?

1. A full set of new. It is recommended to choose a two-stage siphon plus differential pressure water-saving toilet, this sanitary ware is not only water-saving, but also very convenient to use, stool with a large gear, small stool with a small gear, the elderly, children can use. This approach is more expensive, about 400 yuan we can do, and door-to-door installation.

2. water tank, bucket are not changed, only change the water tank fittings. This is not a good way, Li Wu Fang brand 48 yuan, China Ding brand 88 yuan, the same is a patented product, large, small stool stalls, water saving 50%, three-year warranty, is also worth a change.

3. What do not change, just take a small measure can receive twice the result with half the effort. (1) in the flip-flop with a small plastic-plated spring, which not only can be flip-flop more airtight, and the amount of water with their own control, want to use half a box on half a box, want to use a box on a box, according to estimates, the use of water-saving springs can be water-saving 20-40%. Don't look down on this little spring, it is also a patented product, 3 yuan to solve the problem, the installation of only half a minute; (2) water cups, Coke bottles filled with water in the tank, which I do not need to say that you will understand it, of course, bricks can also be.

Two, faucet water conservation. The old-fashioned rotary faucet certainly can not be used, that is, waste of water and laborious, and the valve stem is easy to seepage, get dirty, not to mention how hard it is.

The use of ceramic chips, variable distance, self-closing and other non-leakage, with high-tech content of the faucet, this type of spout is not only non-leakage, long service life, and variable distance, self-closing, etc. also has a short open and close time to prevent the loss of water, water pressure, no water pressure self-closing and other characteristics, and have more than three years of warranty period. After the water stops forgetting to turn off the faucet how to do, the furniture washed, electrical appliances soaked, the neighbors are looking for, annoying ah. The installation of a safe self-closing spout you do not have to worry about, which is automatically in the shutdown state when stopped, the water will not have a drop of outflow. With it you absolutely do not have to worry about there will be a time when the water flooded, and it is 360 degrees open, what angle to turn can be, very convenient and hygienic. There is a variable distance faucet, with this faucet, previously referred to as drip flow, line flow is impossible, but for those who steal water through this means of friends will be sorry, and it closes fast, only 0.16 seconds (the other needs 1-3 seconds), do not underestimate the time, day after day to save the water is considerable ah.

Three, air conditioning water. Air conditioning can also save water, do not get it wrong? Yes, but it should be "made" water. Listen: summer heat like fire, home air conditioning are running, the poor neighbors suffered, drip drip da da can not sleep. Air conditioning drip problem is also plagued us for many years, if we lead the drain to the house, connected to a bucket, the problem is solved, and the amount of water is also very considerable it, 2 hours to receive a liter of water. The water can be used for watering flowers, washing hands and flushing toilets. The neighbors were happy too. Is not a good idea.