Medical waste three knotting methods: one-handed knotting, two-handed knotting, instrument knotting.
One-handed (right hand): the right hand mother, forefinger pinch the left end of the line, in the bottom, the remaining three fingers together on top of the line, the other hand mother, forefinger pinch the other end of the line, in the top, the right hand palm turned to their own (at this time, the 3, 4, 5 fingers vertically pressed on the line), the left hand holding the line, the line will be placed in the left hand near the middle finger of the right hand.
Two hands: the first knot is the same as the single hand; in the second knot, the right and left hands are completely switched, and when the final tightening is done, the hand's direction is the same as in the first knot.
Instrumental knot (right hand with hemostat): one end of the line is free, the other end is lifted gently with the left hand, so that the head of the hemostat is in the middle of the line of the left hand in a clockwise circle, so that the line is wrapped around the head of the hemostat in a circle, keeping the coil, clamping the other end of the line which is free, and tighten it, and then counterclockwise around the left side of the line, clamping the head of the line, and tighten it, and then it is finished.
Details of medical waste collection and transportation:
1, according to the category of placement in special packages or containers to ensure that the packages or containers are free of breakage, leakage and other defects, broken packages should be handled according to the treatment of waste.
2, the waste should not be overfilled, more than 3/4 of the time should be sealed, sealed tightly and tightly, indicating the department and the number of.
3, classified collection, no mixing; no leakage; no dirt (sharps into the sharps box, non-sharps into the bag).
4, transport to prevent loss, leakage, proliferation and direct contact with the body; transport of medical waste should be used to prevent infiltration, put spillage, no sharp edges and corners, easy to load and unload and clean special delivery tools, various packaging and delivery tools should be dedicated to the identification of medical waste.
5, the establishment of medical waste storage, equipment, not open storage, and set up a person responsible for the management.
6, do a good job of registration, including the source, type, weight and quantity, handover time, the final destination and the operator's signature, etc., the information is kept for three years.