Nucleic acid testing point set requirements and specifications are as follows:
I. Sampling point set. Each township (street) according to the village (community) population, regional spatial layout and other factors, taking into account the local population density between neighboring communities and other practical, reasonable setting of sampling points, in principle, each sampling point configuration 1 ~ 3 sampling team (each sampling team daily sampling capacity of about 1,800 people). Townships (streets) received instructions, within 2 hours of standardized set sampling points (see Annex 4). (Responsible unit: townships, streets)
Two, registration points. Should be equipped with tents, tables and chairs, laptop computers (wireless Internet access), wired power supply, send to put the detection of test tube digital strip of transparent plastic boxes (at least 30 cm × 50 cm) and ID card reader, etc., to arrange for personnel responsible for the entry of information on the person being examined, check, according to a group of 10 people uniformly prepared, posting the detection of test tubes digital strip.
Three, waiting area. Should be set up pedestrian access, clear landmarks and arrows, post a meter line logo, as far as possible to ensure one-way flow of personnel, configure at least ten seats, waiting staff should wear a good mask.
Four, collection area. Should be based on climatic conditions, equipped with tents, cold / warm fans, tables and chairs (at least 2 sets), medical waste barrels (including lids, medical waste bags), etc., to ensure that health care workers work in a relatively comfortable environment. Equipped with pharyngeal swabs, test tube holders, disinfectant, gloves, transfer boxes, etc. required for testing.
V. Buffer zone. Set up in the collection area behind the area, can be sampling personnel to replace personal protective equipment, equipped with medical waste barrels (including lids, medical waste bags), disinfectant, protection of the material and so on.
Sixth, the collection of auxiliary area. Set up in the buffer zone behind the region, the space is relatively confined, can be assembled compartments, configure power supply, tables and chairs, drinking fountains and other facilities for the collection of personnel changing, meal preparation, duty, etc., and depending on the weather conditions configuration of air conditioning and other equipment.
Seven, temporary isolation area. Set up an independent place around the sampling point, for temporary isolation in the collection process found in the suspected patients or high-risk groups, configuration of medical masks, disposable isolation clinic, terminal disinfection facilities.
Eight, medical waste temporary storage. In the sampling point around the designated area as a temporary storage of medical waste, marked obvious, set up a cordon, configuration of medical waste barrels (including cover, medical waste bags), the city's medical waste disposal center in a timely manner to collect and dispose of.
Nine, set up a sampling point site work team. Mainly responsible for sampling point partition setting, material security, order maintenance, information registration, on-site disinfection and other comprehensive coordination and management work, configure the appropriate staff, do a good job on-site final disinfection.
Ten, sampling process. Detection of the object through the APP or a small process of charging registration to enter personal information or on-site registration - sampling point registration (5/10 people a tube standard entry sampling tube code) - sampling (a person a disinfection) - 5/10 people a tube bagging - transfer box (in principle, 200 pieces of a box) - 120 ambulance transfer to the testing agency. Before the transfer needs to be in strict accordance with the norms of good protective measures, counting, checking the number of test tubes transferred and bar code, standardized and accurately fill out the transfer form.