We are now in a changing era, the need to use the contract has become more and more, the contract is to reduce the risk of cooperation and investment in the basis. So, do you know what the contract should have? Maybe "order contract and purchase and sales agreement template" is what you are looking for, more related information please continue to pay attention to this website.
Order Contract and Purchase and Sale Agreement Template Part 1General Signing Date: ___________
Signing Place: ___________________
Contract No.: ___________________
Product Name: _______________
The contract should be signed in accordance with the terms and conditions of the contract. p>
I. Receive the goods in accordance with the quality standards and inspection methods implemented by the production plant.
II. The contract will naturally come into effect after the prepayment of _____% in advance, and the balance must be settled in full at the time of picking up the goods.
Third, the place of delivery: transportation and other miscellaneous expenses are paid by the supplier.
Fourth, other breach of contract are in accordance with the relevant provisions of the Civil Code.
V. Disputes between the two sides of the contract should be resolved through consultation, and when consultation fails, the competent authorities can apply for arbitration.
VI. This contract is in quadruplicate.
Order unit Supply unit
Unit name: _________ Unit name: _________
Address: _________ Address: _________
Phone: _________ Phone: _________
Fax: _________ Fax: _________
Bank of Account: _________ Bank of Account: _________
Account No.: _________ Account No.: _________
Tax ID: _________ Tax ID: _________
Representative: _________ Representative: _________
Order Contract and Purchase and Sales Agreement Template Part 2(Demanding Party) (hereinafter referred to as Party A)
(Supplying Party) (hereinafter referred to as Party B) has agreed, after consultation, and in accordance with the provisions of the Economic Law of the People's Republic of China*** and the State of China, to enter into a contract as follows: Article 1 The total value of the order from Party A to Party B shall be RMB yuan. Its product name, specifications, quality (technical indicators), unit price, total price, etc., as listed in the table
Article B to provide the goods must provide the national authority to provide inspection reports issued by the inspection report as well as the product factory certificate.
Article 3 Acceptance method
1, check the outer packaging of the tiles
1) Carefully check whether the relevant markings on the box of the product are clear, including the product brand, trademark, model, color number, specifications, production batch number or date of manufacture;
2, check whether the delivery product and the order are in line with the order
1) Check whether each of the tiles is the same as the model on the order form. model is consistent with the model on the purchase order;
2) Check whether the delivery of each model of the product is consistent with the viewing;
3) Check whether the embryonic tile trademark of each tile is clear and unambiguous.
4) Check whether the delivery varieties are missing!
3, check the number of tiles. Carefully check the number of tiles, pay attention to the number of pieces of tile and the conversion between flat meters.
4, check the quality of the tiles focus on checking the following aspects:
1) the quality of zero and loose pieces, whether there is a corner, scratches and other surface imperfections, tiles waistline whether there is any bump;
2) check whether the tiles are broken, you can shake the box with your hand to listen to whether there is a "crunch!
3) check the flatness of the tiles: the same model of the product will be two pieces of the same model out of two pieces of the horizontal surface, with the tip of the two hands back and forth along the edge of the tile parts of the sliding, if after the seal of the tiles, there is no obvious lagging feeling, the size of the tiles is relatively good, the error is small, so that the size of the error is the smaller the tiles of the tiled paving effect will be better! On the contrary, if there is a clear feeling of lagging tiles, indicating that the size of the tile error is large, will affect the effect of paving!
4) check the flatness of the tiles, two or four pieces of the same type of tiles in accordance with the same pattern of tiling in the plane, with a hand in the tiles back and forth on the slide, if after the tile seam parts are not obvious high and low feeling, the tiles are good flatness, and vice versa, that the tiles are poorer in flatness, it will affect the overall effect of tile paving, floor tiles, if the flatness of the tiles is poor, serious! The situation will also trip people!
5) tile 'straight angle problem
Now the tiles are mainly rectangular or more, each corner of the tile is a right angle, if the straight angle is poor, it will also affect the effect of paving tiles, take four pieces of the same type of tiles, splicing, if there are four pieces of tiles can not be tight seams, always one or two seams appear gaps, indicating that the tile's straight angle is not particularly good.
5.
5, once again accounting for the unit price and total price of tiles.
Article IV payment and settlement of payments and expenses
1) Party A received the goods after the organization acceptance, acceptance after the opening of the product inventory list, Party B to the site of the product inventory list, as well as the corresponding amount (80% of the total price of the goods) of the formal invoices to the Party A financial payment procedures,
2) Party A in the completion of the paving without any quality problems, that is, to pay the corresponding party B 10% of the total price of goods.
3) Party A in the completion of the project, no need to buy goods, according to the actual amount of goods received for settlement, a one-time payment of the final payment.
Article V Delivery Regulations
1. Delivery: Party B is responsible for the delivery of products to the site site, Party A designated on-site materials docking point, Party A is responsible for unloading.
2. Delivery location: the construction site of the project
3. Delivery date: ＿＿＿＿＿＿
Article VI Economic Responsibility
(a) Party B shall be responsible for the economic responsibility
1. Product color, variety, specifications, quality does not conform to the provisions of this contract, Party A agreed to utilize the person, according to the quality of the price. Can not be utilized, Party B shall be responsible for the guaranteed return, guaranteed replacement. Due to the above reasons for the delay in delivery time, each day late, Party B shall be calculated according to the late delivery of part of the total value of the purchase price of three ten thousandths of the late delivery of liquidated damages to be paid to the Party.
2. If Party B fails to deliver the products according to the quantity stipulated in this contract, Party A should pay the missing part if needed. If Party A does not need, can be returned. Party B shall bear the loss caused by the return. If Party A needs and Party B can not deliver, then Party B should pay Party A can not deliver part of the total value of the goods 5% of the penalty.
3. The product delivery time does not match the contract, every day of delay, Party B shall pay Party A to delay the delivery of part of the total value of the goods three ten thousandths of the penalty.
(B) Party A's economic responsibility
1. Party A, such as the return of goods, should be negotiated with Party B in advance, the number of returns shall not exceed 5% of the total contract volume, Party B agreed to return the goods, should be reimbursed by Party A to return the part of the goods returned to the total value of the penalty of 1%. Party B does not agree to return the goods, Party A still receives the goods according to the contract.
2. Party A did not deliver the technical information, raw materials or packaging to Party B in accordance with the specified time and requirements, Party B can extend the delivery date.
3. If Party A fails to make payment to Party B according to the specified date, Party A shall pay Party B three ten thousandths of the total amount of deferred payment for each day of deferral, as a penalty for deferral.
4. Party B delivery or products, such as Party A refused to take delivery, Party A shall bear the resulting losses and transportation costs and penalties.
Article VII of the product price adjustment, must be negotiated between the two sides, and reported to Party A for approval before the change. Before Party A's approval, the contract should still be based on the original price. If Party B's delivery is affected by the price problem, Party B shall pay Party A three ten thousandths of the total value of the delayed part as penalty for each day of delayed delivery.
Article 8 A, B, any party to request all or part of the cancellation of the contract, you must provide adequate reasons, after consultation between the two sides, and reported to the higher authorities for the record. The party that proposes to cancel the contract shall pay the other party 5% of the total amount of compensation for the cancellation of the part of the contract.
Article IX due to production materials, production equipment, production technology or market changes, Party B must change the product varieties, colors, specifications, quality, packaging, should be ___ 20 ___ days in advance to negotiate with the Party. Article 10 All the terms and conditions of this contract shall not be changed or modified by Party A or Party B without authorization. If one party alone changes or modifies this contract, the other party has the right to refuse to produce or receive the goods, and to demand that the party who alone changes or modifies the contract compensate for all losses.
Article 11 A, B, either party due to force majeure, can not perform the contract, should promptly notify the other party can not perform or must be postponed, part of the reasons for the performance of the contract. After obtaining the certificate of the competent authority of the other party, this contract can be not performed or postponed or partially performed, and exempted from liability for breach of contract. Article 12 If any dispute or controversy arises in the implementation of this contract, A and B shall negotiate to solve it, and if it can not be solved, either party may apply for mediation and arbitration to the contract management organs stipulated by the state. If a party is not satisfied with the arbitration, it can be sued to the people's court within 15 days after receiving the arbitration.
Article XIII of this contract from the date of signing the seal of both parties, to Party B will be all the goods delivered by Party A acceptance, and according to the provisions of this contract will be void after the settlement of the payment.
Article 14 of this contract in the implementation of the period, if there are any outstanding issues, may be negotiated by the A and B parties, another bylaw attached to this contract, all bylaws in the law and this contract have the same effect. Article XV of this contract **** 4 copies in one, by the A and B parties, each of the original two copies. The person who concludes the contract:
Party A: ＿＿＿＿＿＿ (seal) Party B: ＿＿＿＿＿＿ (seal)
The person in charge: the person in charge:
The person in charge: address: ＿＿＿＿＿＿ phone: ＿＿＿＿＿＿ account bank, account number: ＿＿＿＿
The person in charge: address: ＿＿＿＿＿＿ phone: ＿＿＿＿＿＿ account bank, Account ＿＿＿＿
___ year ___ month ___ day
Order contract and purchase and sales agreement template Part 3Purchasing unit (referred to as Party A):
Supply unit (referred to as Party B): xx Lighting Technology & Engineering Co.
Signed at:
In order to ensure that the interests of Party A and Party B are protected and their responsibilities are fulfilled, in accordance with the "Chinese People's Republic of China" and the "State Contract". Chinese People's Republic of China Contract Law", A and B through friendly consultation, A and B to purchase LED lighting fixtures reached the following agreement:
Article I contract subject (product name, model, unit price, quantity, etc.)
Article II Payment time and mode
Article II Payment time and mode
1, after signing the contract, party B to pay 30% of the total contract price as a down payment, party A began to supply party B.
2, party B will pay for the contract price of 30% of the total contract price as a down payment.
2, Party A according to the contract volume to complete the supply, Party B to pay 65% of the total contract price.
3, 5% of the total contract price for the warranty, the period of one year, Party A, such as no default, Party B to pay 5% of the total contract price.
Article III Delivery time, place, mode
1, delivery time: Party A pays the first installment of 5-7 working days after delivery.
2, delivery location: Wuzhou City Street Lighting Management Office
3, freight transportation: car transport
Article IV quality standards, requirements and warranty
1, in line with the state, ministries, regions, industry, the corresponding technical standards and norms;
2, Party A, if required, in order to seal the sample
3, packaging standards: standard packaging;
4, to carry out quality assurance: since the date of receipt, due to the quality of the product itself caused by faults, the free warranty period of 3 years; warranty period, due to product quality need to be repaired or replaced products, Party B must be completed within five working days to repair or replace the product. If due to fire, flood, earthquake and other irresistible causes and Party A damage caused by human factors, Party B can be paid to repair, equipment and materials and other costs borne by the Party.
Article V Contract Changes
Other outstanding issues, the two sides to negotiate a solution; changes and modifications to the contract agreed by both parties to change in writing.
Article VI Dispute Resolution
The two sides of the dispute should be resolved through consultation; if the consultation fails, to the People's Court under the jurisdiction of Party B to file a lawsuit.
Article VII: Entry into force and termination of the contract
This contract shall enter into force after both parties have signed and sealed it, and shall be terminated after the fulfillment of the rights and obligations of both parties.
Article VIII of this contract in duplicate, each party to sign a copy, with the same legal effect.
Party A (seal): Party B (seal):
Legal representative (signature) or agent: Legal representative (signature) or agent:
Date: January Date: January Date
Order Contract and Purchase and Sales Agreement Template Part 4Party A Demanding
Party B Supplying
According to the "Chinese People's *** and State Contract", the contract shall be executed in two copies. Chinese People's *** and State Contract Law" and its related laws and regulations in order to clarify the rights and obligations of both parties in accordance with the principle of honesty, trustworthiness, equality and mutual benefit by the two sides coordinated to sign this contract.
I. Description of goods and requirements
1, the contract goods for lighting fixtures.
2, the total amount of RMB yuan
Second, the quality requirements, technical standards, Party B is responsible for the quality of the conditions and deadlines
1, Party B supplied products based on the product samples provided by Party A shall prevail. The whole set of lamps and lanterns must comply with relevant national technical standards.
2, the goods into the field Party B shall provide Party A installation instructions, product certification and quality inspection reports issued by third-party authorities so that Party A on the lamps and lanterns model, packaging, quantity, date of delivery, etc. for inspection and acceptance. If Party A finds that the goods sent to the construction site are mixed with other brands of ` lamps and lanterns and their components or samples provided by Party A does not match, Party A has the right to refuse to accept the goods if the loss caused by Party A are responsible for compensation.
3, the lamp body installation fixtures should be firm and reliable and installation accessories need to be complete, the lamp body appearance of the paint surface is complete and smooth baking varnish surface in the warranty period shall not be due to the natural environment as well as temperature changes in the lamp body have burst paint, peeling, peeling and other phenomena.
4, lamps and lanterns box rectifier should be matched with the power of the light source and set up a fixed mounting device wire and lamp body connection length of 0.4 meters and have a soft sleeve to protect the wire.
5, the purchased lamps and lanterns in the commitment and warranty period within the scope of the lamps and lanterns due to quality problems caused by the replacement of lamps and lanterns components, light sources and lamps and lanterns installation accessories Party B should be unconditionally replaced and is responsible for the replacement of the installation.
Third, the delivery place, time, mode and cost burden:
Delivery place xxx. Delivery time within days from the date of entry into force of the contract will be produced and delivered to the delivery location. Party B should notify Party A in advance of any difficulties. Handover of goods by the two sides **** with the acceptance of good handover procedures Party B should provide formal documents and stamped. Documents should specify the name of the material, specifications, quantity and other details and harvest time goods need to be signed by both parties to confirm. The cost is borne by Party B.
Four, Party B to provide services
1. Party B is responsible for technical support and guidance on the installation of lamps and lanterns.
2. Party B provided by the lamp warranty period of two years lamps and lanterns light source part of the warranty period of one year.
V. Settlement, payment
Advance payment after the signing of the contract Party A order should be paid in advance to the current total purchase price of Party B . Settlement mode settlement amount in accordance with the actual arrival of the amount of money shall prevail. Settlement mode according to the batch settlement. Payment method after the goods to check and pass the total payment of the remaining for the warranty deposit after the warranty period to pay off a lump sum.
Sixth, the rights and responsibilities of both parties
1, Party B should ensure the timely supply of high-quality qualified products in line with quality and standard requirements. Party A in accordance with relevant national technical standards and contractual agreements on the acceptance of goods. The quality of all losses caused by unqualified testing are borne by Party B.
2, Party A did not fulfill the contractual obligations to pay on time Party B has the right to refuse delivery.
3, Party B delayed delivery of more than one day to Party A to pay the total contract price of ‰ of liquidated damages.
4, Party B delayed delivery of more than three days in addition to the provisions of the preceding paragraph to pay liquidated damages, Party A also has the right to terminate the contract Party B has been charged the price should be returned in full.
5, Party A unilaterally terminate the contract without good reason should be compensated for the losses caused to Party B.
Party B shall not be liable for any damages.
VII, consultation and arbitration
In the course of the fulfillment of this contract, if there is a dispute between the two sides should be negotiated to resolve the consultation is fruitless can be referred to the Arbitration Commission arbitration or by the People's Court of the place of origin of the Party A decision.
VIII, the contract description
The contract from the legal representatives of the two sides signed and stamped the date of entry into force to the delivery of materials, acceptance, settlement of all payments. If both parties in the contract period unilaterally abolish the contract the defaulting party must pay to the other party as liquidated damages of the total purchase price.
Nine, other agreed matters
1, Party B to provide a copy of the business license, tax registration certificate, ID card of the legal person, if there is an agent to sign the contract to provide the legal person's power of attorney.
2, the contract in a single copy of party A, party B copies.
3, other matters related to the contract negotiations are recognized by both sides based on the text of the letter and telegram as an integral part of the contract.
4, the contract supply period until the completion of the project. From the date of signing the contract, both parties will be bound by the contract and the implementation of the terms of the contract to the end of the contract.
5, the two sides to deal with any outstanding issues.
Tenth, the contract
Party A Party B
Unit Name Chapter Unit Name Chapter
Party A representative of the representative of Party B
Address address address
bank account: bank account bank
Bank account number bank account number:
Contact person telephone Contact person phone number
Year Month Day Year Month Day
Order Contract and Purchase and Sale Agreement Template Part 5Seller: (hereinafter referred to as Party A)
Purchaser: (hereinafter referred to as Party B)
A. This contract is concluded in accordance with the "Chinese People's *** and the State of the Law of Contracts", signed and stamped by both parties, that is, the occurrence of the legal effect of the two sides must be strictly fulfilled.
Product name, model, quantity, unit price:
Second, the quality requirements, technical standards according to: according to the "cold shaped corrugated machine" standard acceptance, the objection period is one month. A set of special tools. The speed of the corrugated board production line is 60-80 meters (per minute), and that of the double-core corrugated board is 40-80 meters (per minute). The supplier is responsible for the five-layer corrugated paper plate production line and three-layer paper plate laminating machine line production can be in the three-layer paper plate laminating machine composite color top paper to do after the double-core corrugated paper plate (five-layer paper). Specific matters such as the demand side of the five-layer corrugated paper plate production line equipment installed after the discussion.
2, the warranty period of man-made damage, accidents and warranty period after the demand side to bear the cost of maintenance materials, service personnel round-trip transportation costs and local room and board;
3, consumables, consumables are not under warranty.
Fourth, the delivery time and place:
1, after the contract is signed the demand side to pay the deposit, the supply side in -- days will be ready for the equipment.
2, the demand side to pay the shipment will be the supply side within the equipment will be sent to the demand side.
V. Mode of transportation and bear the cost: transportation, the cost is borne.
VI. Packaging standards and supply of packaging: by providing packaging standards, packaging is not recycled.
VII, the settlement method and period:
1, the contract since the signing of the contract within days of the need to pay the amount of the contract as a deposit to the supply side;
2, before shipment to the supply side to pay the total amount of the contract of the issuance of the payment;
3, the payment in cash (the demand side of the telegraphic transfer or money transfer remittance to the supply side of the bank account), the payment of money before the payment of the equipment belongs to the supply side; the payment of money without supplying the equipment belongs to the supply side; without the supply of the equipment to the supply side, the payment is not made to the supply side, and the payment of money is not paid. belongs to the supplier; without the consent of the supplier, the demand side will be cash or other means of delivery to other people, Party A does not recognize.
4, the demand side to provide invoices after full payment;
VIII, acceptance criteria and methods:
1, Party B received the goods, according to the second article of the contract inspection, inspection and acceptance in accordance with the delivery note inspection, acceptance of the demand side of the authorized person acceptance signature to confirm; and issued a stamped official seal of the receipt of Party B confirmation of receipt (by fax or mail) back to the supply side, details of the listed names and specifications of the goods.
2, running acceptance: installation and commissioning is completed, trial production days, supply and demand sides in accordance with the second standard acceptance, the two sides of the authorized person to sign to confirm;
3, after the trial production, due to the demand side did not organize the acceptance of the reasons, it is considered that the equipment has passed the acceptance.
IX, liability for breach of contract: dealt with in accordance with the contract law;
X, the settlement of disputes over the contract: supply and demand sides to negotiate a solution, consultation does not work in the --- the seat of the People's Court.
XI, this contract in duplicate, each party to take one, after signing and sealing, fax effective, with the same legal effect.
XII, the two sides signed a supplemental agreement, supplemental agreement and the contract has the same legal effect.
XIII, other agreed matters:
1, the demand side to provide the supply side of the installation and commissioning personnel in the demand side of the local transportation, food and lodging.
2, the demand side to allow the supply side customers to visit the equipment, the supply side of the equipment price, technical data confidentiality.
Party A (official seal): _________ Party B (official seal): _________
Legal representative (signature): _________ Legal representative (signature): _________
_________ year ____ month ____ day _________ year ____ month ____ Day
Order Contract and Purchase and Sales Agreement Template Part 6Supplier (Party A):
Demand (Party B):
Hereby we order the following products from Party A to Party B:
A. Product name, specification model and price, etc.: Unit: yuan Product name Specification model Packaging (pieces) Unit price (yuan/pc) Quantity (pcs) Amount (yuan)
A face frame
Two face frame
Three face frame
Four face frame
Dimmer switch
Speed switch
Single-pole switch
Year
Dual switch
Multi-wire switch
Single-pole switch for large board
Double switch for large board
Multi switch for large board
Single switch for large board
Single pole switch for large board
Single pole switch for large board
Single pole switch for large board
Single pole switch for large board
Multi switch for large board
Large-board multiplex switch10A universal socket
16A triangular socket
TV socket
Two-core telephone socket
Four-core computer socket
Eight-core broadband sockets Total: (capitals)
Second, quality requirements, technical standards, Party A's responsibility for the quality of the conditions and deadlines: Q/ YBS001-20xx enterprise standard
Third, the mode of transportation and the cost burden on the station: logistics transportation, Party A designated logistics company for delivery, the cost borne by the party;
Fourth, packaging standards: the outer packaging is an ordinary carton;
Fifth, acceptance criteria: Party A received the goods, according to the second paragraph of the contract for inspection, inspection and qualified to pick up; such as the pick-up before the serious damage is found, should be timely. Found that there is serious damage, should promptly notify Party B, and let the transportation department to issue a certificate, the consent of Party B before picking up the goods, otherwise Party A is deemed to have accepted. Party A received Party B goods within ten days after the goods did not raise objections to Party B goods, shown as Party A's proposed goods with the order contract.
Six, payment:
Party A remittance to Party B's bank account or Party A cash delivery to Party B's Finance Department. Without Party B's consent, Party A will deliver the payment in cash or other ways to other people, Party A will not be recognized.
Nine, the contract is valid: Party B to pay the purchase price comes into effect;
Ten, the contract in duplicate, each party a copy.
Party A (official seal): _________ Party B (official seal): _________
Legal representative (signature): _________ Legal representative (signature): _________
_________ year ____ month ____ day _________ year ____ month ____ Day
Order Contract and Purchase and Sale Agreement Template Part 7Party A: Residence: Contact Tel: Party B: Residence: Contact Tel: Risk Tips:
Cooperation in a variety of ways, such as cooperation in the establishment of the company, cooperation in the development of software, cooperation in the purchase and sale of products and so on, the different ways of cooperation involves the content of different projects, the corresponding terms of the agreement may be very different.
The terms and conditions of this agreement are based on specific projects and are for reference only. In practice, it is necessary to modify or reformulate the terms and conditions according to the actual mode of cooperation, project content, rights and obligations of both parties. According to the "Chinese People's *** and National Code" and related provisions, the two sides of the friendly consultation, reached agreement and signed this contract.
I. Subject of the contract
1. Specification:
2. Quantity:
3. Unit price:
4. Price:
II. Product quality standard, special process requirements and cost burden
1. Cost burden:
3. Delivery time and method Party B receives Party A's prepayment _______ delivery within working days, the delivery method is determined by separate negotiation, the delivery is confirmed by Party A, and signed on Party B's delivery sheet.
Fourth, acceptance criteria and period of time Party A from the day of receipt of goods according to the sample clothing standards for acceptance. If there is a quality problem, it should be raised in the meantime, and Party A will be responsible for the delay.
V. Delivery mode Party B in accordance with Party A's delivery information requirements, the bulk of the fabrics sent to the delivery location specified by Party A (Party A to fax, e-mail, telegrams, letters and other written documents specified delivery location). Party B should indicate the single number and goods on the delivery list, the model number, color number, fabric type, grams, color, cylinder number and quantity.
Sixth, the settlement method and period Party A from the receipt of the goods within the day to pay in cash or by transfer.
VII. Service Commitment
1. If the product quality problem occurs due to Party B's reason within ____ months after the product is delivered, Party B will be responsible for the replacement and modification, and the cost will be borne by Party B.
2.
2, after the mass production, such as Party A put forward additional production requirements, in the fabric specifications, quality and price of the same basis as the product, Party B in accordance with the standard production of sample clothes, after consultation with the two sides signed another contract.
Eight, the risk of default liability tips:
Although the contract agreement is meticulous, but can not guarantee that the partner does not default. Therefore, it is necessary to clearly agree on the terms of default, once a party defaults, the other party will be able to use this as a basis for recovery.
1, Party B processing production to Party A confirmed sample shall prevail, in the middle of the process, such as Party A reasons for the replacement of fabrics and styles, colors, etc., the resulting responsibility and costs borne by Party A and extend the delivery date accordingly. If Party A fails to pay the prepayment as agreed, Party B may not produce and extend the delivery period accordingly until Party A delivers the prepayment and starts to produce according to the corresponding requirements of the contract; if Party A fails to deliver the payment according to the agreed time, Party A shall pay liquidated damages to Party B according to the monthly interest rate of _______% of the unpaid amount of the payment.
2, in the middle of the need to replace the fabric and style, color and other reasons put forward by Party B need to obtain Party A's consent, otherwise the resulting responsibility and costs borne by Party B, such as the need to extend the delivery date, the two sides to negotiate separately.
IX, due to force majeure disasters and indeed not a party's own reasons for not being able to fulfill the contract, can be exempted from the responsibility of breach of contract.
X. Other outstanding matters, the two sides to resolve the negotiation. Ten
I. This contract is a _______ copy, both sides of the _______ copy, from the date of signature of both parties to take effect. Party A (signature): signing place: ________ year ____ month ____ day Party B (signature): signing place: ________ year ____ month ____ day