A, Yifan fireplace how
Yifan fireplace is a joint venture with the Canadian CFM Group. The company is a registered brand of the State Administration for Industry and Commerce, with 17 national patents, European CE certification, North American EPA certification. It belongs to the national chain brand. It provides a good place for people who need to experience and enjoy the fireplace in Shaoyang, Xiangtan, Hengyang Changde, Loudi, Yueyang, Nanchang and other areas. Yifan fireplace is a noble place for people. Warmth, family culture.
Two, Yifan fireplace buying tips
1. According to the size and specifications to choose the villa fireplace. Villa fireplace environment is different, different specifications and functions. Generally speaking, the bedroom and living room are used for fireplace. The main function of the bedroom fireplace is heating. You can choose a smaller villa fireplace. Take Jinan main helm fireplace for example. The size is 700*660*500(mm). The fireplace can heat up to 30-90 square meters to meet the heating needs of villa bedrooms.
2. According to the type of villa fireplace, villa fireplaces are divided into: built-in fireplaces, freestanding fireplaces, wall-mounted fireplaces and other customized fireplaces. When villa design, built-in fireplaces need to have a smoke venting channel. It is usually used with a mantel or decorative fireplace. It has cottage decorative style and elegant atmosphere with all the amenities. Stand-alone fireplace is not limited by the decoration, does not destroy the existing decoration, can be installed anywhere, suitable for villas that have been renovated; general villa users buy these two fireplaces more.
Three, Ifan fireplace how to connect the thermostat
1. First, prepare the gas boiler and indoor thermostat. There are two types of thermostats: wired and wireless. Then turn off the wall-mounted boiler, unplug the power supply, open the control panel of the wall-mounted boiler circuit board, according to the instructions to find the interface of the external thermostat (the circuit board has a short wire), which is the plug of the external thermostat of the wall-mounted boiler. Unscrew the screw with a screwdriver and remove the short wire.
2. Next, guide the two terminals of the thermostat through the gap at the bottom of the wall-mounted boiler to the circuit board location, plug it into the circuit board thermostat connector, and then tighten it with a screwdriver. Then install the battery into the thermostat and adjust the time and temperature.
3. After installation, clean the wall-hung boiler, then debugging, turn on the wall-hung boiler, set to winter heating mode, if the combustion is normal, it will be good. Then install the shell of the fireplace. It should be noted that the thermostat line needs to be wired from the gap of the wall-mounted boiler, not directly from the operating panel; be sure to pay attention to the location of the wall-mounted furnace thermostat plug, which is irreversible.
Four, villa fireplace is how to design
The general situation is that the traditional garden style used for construction. Chinese style is a very long process of development. After more than two thousand years of development and progress, he has a rich literature and aesthetics. Chinese style has existed for a long time. It has existed since the pre-Qin period. During the Tang and Song dynasties, more and more Chinese villas began to flourish. By the Ming and Qing Dynasties, due to the economic level, the Chinese villa was greatly improved. It has reached a state of prosperity. The Chinese style is generally larger, focuses on the development of gardens, is fully functional, has a variety of forms, and has a stronger sense of art.
The above is brought to you by us about the introduction of Yifan fireplace.