Or on the project ah
Mechanical equipment management system
In order to strengthen the safety management of mechanical equipment on the construction site, to ensure the safe operation of machinery and equipment and the personal safety of workers, specially formulated this system.
One, the construction site must improve the mechanical equipment safety management system, improve the mechanical equipment safety responsibility system, personnel at all levels should be responsible for the safety management of mechanical equipment, construction manager and safety management personnel should be responsible for the supervision and inspection of mechanical equipment.
Two, mechanical equipment operators must be in good health, familiar with their respective mechanical equipment performance, and by the relevant departments of training and assessment of qualified license.
Three, in the non-production time, without the approval of the project manager, no one shall use mechanical equipment.
Four, machine management and operators must be relatively stable. Operators must do a good job of routine maintenance of mechanical equipment to ensure the normal operation of mechanical equipment.
Fifth, the new purchase or modification of machinery and equipment, must be accepted by the relevant departments of the company, the development of safety and technical regulations before being put into use.
Sixth, after overhaul of machinery and equipment, must be accepted by the relevant departments of the company before being put into use.
VII, the construction site of large mechanical equipment (tower crane, construction hoist, etc.) must be installed and dismantled by professionally qualified units, after installation, must be approved by the project department, the relevant departments of the company and the Construction Committee and the Safety Supervision Bureau of the acceptance of the relevant departments, listed for use.
Eight, tower cranes, construction lifts, plus section, must be carried out by professional qualification units, and by the project department and the company's relevant departments after acceptance, before use.
nine, the construction site of the small and medium-sized machinery and equipment, must be qualified by the relevant personnel of the project department after acceptance, license plate use.
Ten, mechanical equipment is strictly prohibited overload and use with disease, maintenance and repair are strictly prohibited in operation.
Xi, mechanical equipment must be strictly enforced fixed machine, fixed person, fixed position system.
Twelve, the use of all kinds of mechanical equipment must comply with the project, the company and the higher departments of the relevant norms, regulations and systems.