Why can't the smart bracelet connect

Why Xiaomi bracelet 3 can not connect to the phone

1, may be because the phone Bluetooth is not open, or the phone Bluetooth is not open, in the phone settings to open the Bluetooth function can be.

2, it is possible that the cell phone system version is too low, millet bracelet support system for iOS7.0 and above version of the Apple phone; compatible system for Android4.4 and above version, if the cell phone system version is lower than the above parameters, it may not be able to connect, upgrade the cell phone system or replace the phone can be.

3, may be millet sports app version is too low, second, app version is too low, or app system failure, may also lead to millet bracelet can not be connected properly, upgrade the app, or reflect online within the app can be.

Extended information:

Xiaomi bracelet 3 related to the introduction

1, function: the use of Xiaomi sports APP Bluetooth connection Xiaomi bracelet 3, able to carry out the functions of the reminder, compared with the bracelet 2 generation, you can find a cell phone, the bracelet screen lock, the weather settings and so on.

2, the screen: millet bracelet 3 compared to the 2 generation has a larger screen, the use of 0.78 inches PMOLED display, can display more than 24 Chinese characters, PPI as high as 193, is currently on the market in similar bracelet products in the highest PPI custom display.

3, Battery: Xiaomi bracelet 3 built-in 110 mAh battery, compared with 70 mAh of the 2nd generation of 40 mAh larger, so although the screen of the millet bracelet 3 than the 2nd generation of power consumption, but the bracelet 3 generation of the large battery has a good complement.

Baidu Encyclopedia - Xiaomi Bracelet 3

Why does the smart bracelet automatically disconnect?

Smart bracelets and cell phones can be separated by a distance of about 10 meters in general, high-end smart bracelet communication distance is limited to about one hundred meters. When the smart bracelet and cell phone exceed this distance, the bracelet will vibrate to remind the disconnection.

One, if in the use of smart hand bad, found that Bluetooth often disconnect, may be the smart bracelet and cell phone more than 10 meters from the connection distance, this time the Bluetooth will be automatically disconnected, the user can move to within 10 meters, or carry a cell phone, at this time the smart bracelet can also be reconnected. In addition, it is also possible that the connection distance between the smart bracelet and the cell phone is almost 10 meters, when the Bluetooth will be disconnected frequently. There is also to see if there is signal interference around, for example, there are multiple Bluetooth devices around, or wifi environment has router influence, or microwave ovens around, etc., will affect the connection status of the smart bracelet and cell phone.

Two, in fact, the Bluetooth distance needs to be within 10m in an open environment to receive information. When the bracelet and cell phone exceed the connection distance (10m in an open environment) or when there is strong interference, Bluetooth will automatically disconnect.

Three, in addition to monitoring your daily steps and sleep quality, the smart bracelet can also work with your phone's application software to realize incoming call alerts. This function is very practical and must be praised. I believe that small partners in daily life are missed to answer the phone, if you are currently using a smart bracelet, you can try its incoming call reminder function. Smart bracelet away from the phone far away from the time generally can not be used, the distance is best not more than 10 meters it.

Bluetooth bracelet and cell phone connection is not how to do

1. cell phone and bracelet connection

Many smart bracelets on the market use Bluetooth to connect with other devices, Baidu bracelet and TCLidol

X+ cell phone also use Bluetooth connection. However, the Bluetooth connection between them is not the same as the connection between ordinary smartphones. It needs to be connected through the smart ring's exclusive application software ****fe in the phone. The Baidu bracelet doesn't have any buttons or switches, and its Bluetooth is always on, so when TCL

idol

X+ turns on the Bluetooth on its cell phone, you can use the ****fe software to connect your cell phone with the bracelet according to the prompts. It is important to note that the battery level of the bracelet needs to be at least 60%, and double-click the bracelet to feel the vibration feedback to realize the connection, of course, before connecting you need to register for a ****fe account or use QQ/Weibo to log in.

2. The bracelet and the cell phone can't be connected

The cell phone can't be connected to the bracelet for the following reasons,

1, the bracelet is out of battery, the cell phone and the bracelet rely on the Bluetooth connection, and if the bracelet is out of battery the bracelet is in the shutdown state, and naturally, it won't be able to connect to the bracelet.

2, the phone Bluetooth is not open or the bracelet phone Bluetooth device is damaged, the above reasons may cause the situation can not be connected,

3, the distance between the phone and the bracelet exceeds the distance of the Bluetooth device link, the general good Bluetooth device connection are in the dozen meters or so, beyond the scope of the interruption.

4, the bracelet and cell phone bluetooth type is not consistent, now the phone is basically bluetooth 4.0, if the bracelet cell phone bluetooth device can not be matched will not be able to connect.

3. Why the bracelet is not connected to the phone

Why the bracelet is not connected to the phone:

1. It is recommended to observe whether the smart bracelet (such as Xiaomi Bracelet) has sufficient power, and then observe whether the phone's bluetooth is able to connect normally, and whether the installed app is correct, and in addition to try to turn off the bluetooth and restart the watch and then connect.

Bracelets

1. Bracelets are a kind of accessory in the history of human development, and they have different significance for different characters at different times and on different occasions.

2. There are various kinds of material bracelets in the market, which have become a fashion element.

3. Bracelets are made of a variety of materials, including plastic, metal, branches, bouquets, crystals and so on.

4. Mobile phone Bluetooth search bracelet how to do

If the phone can not search for other devices through Bluetooth, it is recommended to try to operate:

1. Check whether the phone and the other device have been turned on Bluetooth.

2. Check whether you can search for other devices with Bluetooth function, to exclude whether it is Bluetooth compatibility or Bluetooth setting problem of the other phone.

3. Some cell phones can be set up with Bluetooth visibility, so enter the Bluetooth settings interface to see if your phone is visible to all devices.

4. Make sure the distance between your device and another Bluetooth device is within the maximum Bluetooth range (10m).

5. Turn off and restart the phone to search again.

If it is invalid, please bring your purchase invoice, warranty card and machine to Samsung service center for checking.

What should I do if I can't connect my Loxin Smart Band to Bluetooth and my cell phone can't be searched?

1, first of all, cell phone Bluetooth and bracelet need to establish a pairing relationship, the method is: first of all, the cell phone, bracelet Bluetooth function open, and the cell phone Bluetooth set to "all visible".

2. Search for Bluetooth devices on your cell phone, find the Bluetooth of the bracelet, select the pairing connection, the password is 0000, and the connection is successful after the pairing is completed.

3, the use of WeChat interconnection

Just use WeChat to scan the QR code that comes with the bracelet, and then you can bind the bracelet directly to the WeChat public number of Lexin Sports. Using the public number, users can directly view the number of steps, kilometers, calories, sleep status through the public number

4, app download steps:

Use your phone to scan the QR code on the manual to download the Lexin Sports APP, and then scan the exclusive QR code of the handheld ring to bind to the public number can be.

Millet bracelet 2 does not connect to the phone

1, millet bracelet 2 does not connect to the phone may be because of the bracelet power is insufficient, resulting in the inability to connect, try to open the bracelet can be normal, if you can, it means that the bracelet power is sufficient, can not be connected to the other reasons, if the bracelet can not be opened, then it means that it is insufficient bracelet power caused by the inability to successfully connect, will be the bracelet charging, and then reconnect. Wait until it is full, and then reconnect it.

2. The bracelet may be incompatible with your cell phone's system, so you can try to unbind the bracelet and then re-bind it to try to connect it normally.

3, this situation may be the cell phone on the millet bracelet 2 APP system has been upgraded, and the bracelet itself did not carry out the system upgrade, you can open the bracelet APP on the cell phone, click on "my device", select "version number", click "version number", and then click "version number", then click "version number". You can open the bracelet APP on your mobile phone, click "My Device", select "Version Number", click "Firmware Version Number", and then return to the main interface, you can see the bracelet is being "Synchronized", and you can use it when the synchronization is completed.

4. There is also a possibility that the phone system has a vulnerability that prevents it from connecting properly, so you can upgrade the phone system or restart the phone before trying to connect it.

5, if the above methods can not be solved, it may be millet bracelet 2 sensor is damaged, this situation, you can carry the bracelet to the professional after-sales service store for repair.