The advantages of turning over:
1. The structure of the machine is simple and practical, easy to install and maintain;
② The embryo is turned over and cut upright when the embryo width of 600mm, height of 1200mm, so that the cutting steel wire is shorter, is not easy to pull off, is not easy to drift, higher cutting accuracy;
③ Longitudinal cutting device through the guide rail walking (embryo on the cutting table does not move), transverse cutting device using a screw drive to ensure that the cross-cutting frame. The longitudinal cutting device travels through the guide rail (the embryo does not move on the cutting table), the transverse cutting device adopts the screw drive, which can ensure the consistency of the lifting and driving of the transverse cutting frame and guarantee the precision of cutting;
4) When the embryo cuts in an upright position, the groove milling operation can be completed at the same time as the embryo cuts in the longitudinal direction, which does not need to configure the groove machining equipment;
5) In addition to the production of blocks, the machine model can also produce the plate, and it can do the six-face cutting of embryo and the quality is less affected by the mold deformation. Quality is less affected by the mold variant;
6 Zhengzhou Deyi Heavy Industry production of aerated concrete equipment flip cutting machine technology with a high degree of automation, equipment operation is simple and convenient, the model cutting process, molds and embryo lifting process to achieve the flip, and cutting in different workstations, the previous embryo in the cutting process, flip spreader that can be completed at the same time the reset and the next embryo lifting flip process, high efficiency, the cutting process is consistent, and the cutting process is more efficient, the cutting process is consistent. Higher efficiency, cutting process is consistent.
The advantages of turning:
Compact structure, small maintenance;
② cutting waste all recycling, no finished product hard bottom waste, does not produce secondary pollution;
③ embryo does not stick;
The choice of air turning technology and turning technology or need to look at the customer's actual needs.