Method of drawing plan with cad2007 1
1, as shown below, was drawn in the previous articles. Let's see how to draw the floor plan of the room.
2. This is drawn by the rectangle tool. After offset, the following figure is obtained: whether the length of a cabinet is wide or 600 is drawn on the wall.
3. Open the CAD gallery and find a picture like this.
4. After copying to the picture below, you see the wardrobe.
5. After finding the bed, here is the bed of 1.8 meters. In general, a room of more than 20 square meters can accommodate a bed of 1.8 meters.
6. I am drawing a TV set, as shown below. I have already said the first few articles in front of the TV. You can read the first few articles. This completes the room plan.
Method of drawing plan with cad2007 II
1, as shown in the following figure. This figure completes it with tools such as straight line, offset and trimming.
2. The following picture is drawn with CAD2008 software, and can also be drawn with other versions. Almost the same. This picture has dimensions, and you can complete it according to the following picture. If you don't understand this picture, you can look at the previous article.
3. When selecting a window, the color of the window is usually cyan, and other colors can be used.
4. As shown in the figure below, change all other windows to cyan.
5. The shortcut key here is the H space bar, and the following pattern filling and gradient colors will appear. Select a sample.
6. Choose other patterns that are solid. Here is the wall, and here is where the wall is marked.
7. Click the point to pick.
8. Select the box shown below. This is a pillar and a load-bearing wall. You can't hit it. Select and press the space bar.
9. After jumping to the figure below, click OK.
10, as shown below, shows the windows and walls. You will know where the windows and load-bearing walls are when you look at the CAD drawings. The next article is the drawing of doors and beams.