A, paste type installation
Paste type installation is the most common installation method of signage installation, paste type installation is mainly used in the relatively small signage, using the adhesive has glass glue, foam adhesive, universal adhesive, sponge adhesive, double-sided adhesive, structural adhesive, etc., paste the signage should be based on the different materials, the installation environment, the dryness and humidity to choose to use the appropriate adhesive. The disadvantage of the paste type is the use of short time.
Two, hanging installation
Mainly for larger, lighter quality signage, installation, first determine the point of drilling, using an impact drill for drilling, in the hole to the installation of self-tapping screws, when using only a self-tapping screws must be installed in the signage in the central position of the hole to keep the signage level, and then the signage will be hanging on the folded edge of the screws to adjust the position, and then in the sign of the folded edge of the screws to adjust the position, and then in the sign of the sign of the sign of the sign of the sign of the sign of the sign of the sign of the sign. To adjust the position, and then in the signage around the fixed glue can be. The disadvantage is that the installation in a humid environment, the fixed glue will fall off after a long time, affecting the beauty of the signage.
Three, decorative screw-fixed installation
This installation is not very common, mainly because the customer is not customized signage has been reserved before the installation of the installation of the signage installation holes, and then after their own reserved holes for the design of the signage, the general acrylic plate clip painting is used in this way, the main thing is that the screws must be accurately positioned, otherwise it is impossible to carry out the correct Installation.
Four, pre-embedded installation
This kind of installation is mainly for outdoor signage, and then according to the quality of the signage and volume to distinguish, for example, flowers and plants in the park can be directly after digging a pit to fill the soil fixed, and then paved with lawn to be decorative, such as the spirit of the fortress of such a large-scale signage, the first digging a pit after the pouring of concrete to be fixed, and then according to the quality of the signage Size of the second pre-embedded: first pouring concrete in the pit, and so the concrete solidified and then the signage using expansion wire fixed on top, in the use of concrete for pouring.
Five, pull the explosive screws fixed
This method is mainly applicable to the ground base for the concrete structure of the road or wall, signs do not need to move to take this installation method. Such as road signs, parking lot signs are mostly used in this way.
Henan pre-sign has eleven years of design and production experience, and many brands have a cooperative relationship.