Wireless mouse and keyboard connection to 2.4G with Bluetooth more.
Here to the common Bluetooth wireless mouse and keyboard as an example, the steps are as follows:
1, first of all, we need to prepare the Bluetooth device we need, as shown in the figure below.
2, then the Bluetooth receiver into our computer's USB port, as shown below.
3, and then click on the power button to turn on the Bluetooth mouse, as shown below.
4, and finally click on the switch to turn on the Bluetooth mouse, as shown in the figure below. This operation is complete, we can use the Bluetooth mouse to control our computer. The operation of the Bluetooth keyboard and Bluetooth mouse is the same.
Click the Start menu in the lower-left corner of your computer, then place your mouse on the Settings menu and click Control Panel.
Then click on "Accessibility Options" in the Control Panel.
Click on the "Accessibility Options" button at the bottom.
Click the "Mouse" button in the upper menu of the dialog box that appears.
Then check the box in front of "Use Mouse Button" and click the "Apply" or "OK" button.
At this point, the number keys 1, 2, 3, 4, 6, 7, 8, 9 on the right side of the keyboard will have the function of the arrow keys, hold them down and you can see the mouse pointer on the top of the computer to move, the number 5 for the mouse on the click, the + sign for the right click.
When you turn on the keyboard with mouse functionality, there will be a mouse-shaped icon in the lower right corner of your computer that you can double-click to quickly turn this feature on and off.
Advantages of desktop computers:
Heat dissipation, desktop computers have the advantage of laptop computers can not be compared. The chassis of the desktop computer has a large space, good ventilation and has been widely used by people.
Expandability, desktop chassis to facilitate user hardware upgrades, such as optical drives, hard drives. Such as the desktop chassis optical drive drive slot is now 4-5, hard disk drive slot is 4-5. It is very convenient for users to upgrade their hardware in the future.
Protection, desktop all aspects of the protection of hardware from dust. And waterproof is good in the pen book this development is not very good.
Clear, desktop chassis on the key, restart button, USB, audio interfaces are in the front panel of the chassis, user-friendly.
The way to use a wireless keyboard for desktop machines
The way to use a wireless keyboard for desktop machines to solve the problem I:
1. It is recommended to buy a kit so that you can just plug a receiver into your computer;
2. Plug the receiver of the wireless key/mouse into the USB port on the back of the computer (or you can plug it into the front end, but in order to plug the U disk more conveniently, it is recommended that you plug it into the The wireless mouse can be used normally, if you need to set up the individual wireless mouse, please install the software on the CD-ROM that comes with the mouse, and then enter the software to set up the mouse according to the wizard.
Desktop use wireless keyboard solution two:
One, the wireless keyboard transmitter, inserted into the USB port.
Second, the wireless keyboard will be installed on the battery, there is a switch on the switch.
Three, into the WINDOWS state, you can use it normally.
Desktop use wireless keyboard solution three:
It is recommended that you will be a wireless mouse and keyboard set of wireless receiver plugged into the computer's 'USB interface, the general wireless signal can be about 10M effective distance, so you will be able to use the wireless receiver plugged into the computer's USB interface can be used normally.
Plug the wireless receiver, your wireless mouse and keyboard are loaded with batteries, pay attention to distinguish between positive and negative battery, but also note: some wireless keyboard or mouse will set the battery switch, do not forget to open. After loading and waiting for a while can be used normally, now the wireless set of general will be automatic code.
Related Readings:
Wireless Keyboard Technology Advantages
Worldwide Availability
The Bluetooth wireless technology specification is available for free use by our member companies worldwide. Manufacturers in many industries are actively implementing this technology into their products to reduce the use of messy wires, enable seamless connectivity, stream stereo sound, transfer data, or communicate by voice.Bluetooth technology operates in the 2.4GHz band, which is an Industrial, Scientific, and Medical (ISM) radio band that does not require a license. Because of this, there are no fees to use Bluetooth technology. However, you must register with your cell phone provider to use GSM or CDMA, and you will not need to pay anything more than the cost of the device to use Bluetooth technology.
Device range
Bluetooth technology has seen unprecedented adoption, with products integrating the technology ranging from cell phones and automobiles to medical devices, and users using the technology ranging from consumers to the industrial marketplace to corporations. Low power, small form factor and low cost silicon solutions allow Bluetooth technology to be used in even the smallest devices. See a complete list of the various products offered by our members in the Bluetooth Product Catalog and Component Product List.
Easy to use
Bluetooth is an instant technology that requires no fixed infrastructure and is easy to install and set up. You don't need cables to connect. It's also easy for new users to use - all you need to do is own a Bluetooth-branded product, check the available profiles, and connect it to another Bluetooth device using the same profile. The subsequent PIN code process is as simple as using an ATM machine. When you're out and about, you can take your Personal Area Network (PAN) with you and even connect to other networks.
Global Specification
Bluetooth wireless technology is the most widely supported, feature-rich and secure wireless standard on the market today. A worldwide qualification process tests members' products for compliance with the standard. Since the release of the Bluetooth specification in 1999, a total of *** more than 4,000 companies have become members of the Bluetooth Special Interest Group (SIG). At the same time, the number of Bluetooth products on the market has grown exponentially and rapidly. The number of products has grown exponentially for four consecutive years, and the number of installed base stations may also reach 500 million by the end of 2005.
How can a desktop computer use a keyboard instead of a mouse?
Steps to use a keyboard instead of a mouse:
Required materials: computer, keyboard.
One, first of all, at the same time press the "Shift key", "Alt key", "NUMLK key" to open the mouse button.
Then click "Yes" in the pop-up window.
Three, then double-click the left mouse button on the taskbar "mouse button".
four, open the mouse button window, in which set to suit the individual mouse speed and other options, click on the lower right corner of the "application" can begin to use the mouse button.
Fifth, the use of the keyboard "2, 4, 6, 8 keys" instead of the mouse for up and down, left and right movements, "5 keys" instead of the left mouse button, "menu key" instead of the right mouse button.
How do I set up my keyboard and mouse?
Question 1: How to set the mouse on a desktop computer on the keyboard 1, open the computer in the lower left corner of the Start menu, click Control Panel Options
2, in the new window that opens to find Easy Access and click
3, and then to find the keyboard to make it easier to use (as shown in the figure)
4, and then to find the use of the keyboard to control the mouse click on the mouse to set up
5, check the box above to set up the mouse
6, and then click on the keyboard to set up the mouse7, and then click on the keyboard to set up the mouse.
5, check all the boxes above, and set the pointer speed, and then select off in the other settings. Finally, click Apply and then OK
6, at this time the lower right corner of the computer taskbar on the right will appear a small mouse, if the mouse has a small x, then hold down Alt + left Shift + NumLock activation
After activation will become this
So that you can press the numeric keypad numbers to control the direction of the mouse
Question 2: How to Setting up to put the keyboard instead of the mouse is generally done with left ALT+left SHIFT+NUMLOCK to activate the mouse buttons.
Clever use of Windows mouse keys
The mouse is both convenient and powerful for Windows users, and poor mouse performance or failure often makes the user very distressed. This article introduces a way to use the keyboard to simulate mouse operation, as follows.
First open the Control Panel, select and open the auxiliary options, click the "Mouse" tab, and then click the "use the mouse button" status box, so that its status for the check mark, and then click the "Settings" button. " button, in the emergence of the "mouse button settings" box will be adjusted to the highest and fastest mouse speed, and finally press the "OK" button. So far, the completion of the mouse and keyboard settings, the following talk about the use of the mouse and keyboard.
The mouse keyboard that the "mouse button" function for the open state of the numeric keypad. Specific key functions are as follows: in addition to the key "5" and the key "0" outside the function of the eight numeric keys for the corresponding mouse icon movement direction, the key "5" function for the click; the key "0" function for the click; key "5" function for the click; the key "0" function for the click. Key "5" function for click; key "0" function for hold; key "．" Function for release; key "＋" function for double-click; key "-" on behalf of the right button; key "＊" on behalf of the left and right double-button; key "/" function to restore the key "5" click on the left mouse button of the standard function; key "NumLock" for the digital, the mouse keyboard switching keys. With the mouse keyboard can easily realize the various functions of the mouse, the description is as follows:
Move the mouse icon. Mouse keyboard *** has eight directional keys, keys "8", "2", "4", "6", "7", "1", "9", "3" functions are to make the mouse symbol up, down, left, right, left up, left down, right up, left down, right up, left down, right up, left up, left down, right up, left up, left down, right up. The function of "3" is to move the mouse symbol up, down, left, right, left up, left down, right up, right down, and the movement of the mouse symbol is accelerated from slow to fast when the key is pressed, and released when it reaches the target position.
Execute a program or open a document. Use the direction keys of the mouse keyboard to move the mouse icon to the program or document name, hit the key "＋", the function is realized.
Selected. Move the mouse cursor to the target, hit the key "5"; or open a document, move the mouse cursor to the first position of the pre-selected area, hit the key "0", and then move the mouse cursor to the end position of the pre-selected area, hit the key "．" The "Selected" function is realized.
Drag and drop. Select the target, move the mouse icon to the selected area, hit the key "0", and then move the mouse icon to the drag and drop destination location, hit the key "．", "drag and drop" function to achieve. The "drag and drop" function is realized.
Cut, copy and paste. Select the target, move the mouse cursor to the target area or target position, click the key "-" (switch to the right mouse button), click the key "5" (equivalent to click the right mouse button), and then move the mouse cursor to the pop-up menu of the corresponding function, click the key "-" (switch to the right mouse button), and then move the mouse cursor to the pop-up menu of the corresponding function, hit the key "/" (the function of the key "5" will be restored to the standard state of clicking the left mouse button), hit the key "5", the function is realized.
To use the keyboard instead of the mouse without losing efficiency, I think the shortcut keys are necessary to remember. The following can be used as a reference.
Question 3: The computer comes with a keyboard and mouse driver in which to set up if just a general contradiction, their own grasp of the situation, after all, working for others. If it is related to the interests of students, personality and other interests involved in the law, through the legal process, if the ordinary contradictions, bear it, eat people's food, the bear on the bear, to which false companies will have contradictions, bear on, there is no contradiction.
Question 4: how to set up to use the keyboard to move the mouse to be detailed in the "Start" menu, select "Settings", "Control Panel", in the "Control Panel", "Control Panel", "Control Panel", "Control Panel", "Control Panel", "Control Panel", "Control Panel", "Control Panel", "Control Panel", "Control Panel". "Control Panel" on the double-click "auxiliary options" icon, click the "Mouse" tab, and then click "use mouse button ". This allows you to use the keyboard to control the mouse cursor, analog mouse mouse buttons are referred to the keyboard on the right side of the keypad (numeric keypad), the use of the NumLock key in an effective state. The following is the mouse keys: move 8, 2, 4, 6, 7, 9, 1, 3 keys, eight orientation long-distance movement Ctrl above the eight keys to select the left mouse button / select the right mouse button - click 5 double-click drag 0 (INS) release. (Del)
Question 5: Where in the computer there is a place to set the mouse and keyboard? Click Start - Control Panel - Mouse or Keyboard is it
Some machines it click Start - Settings - Control Panel - Mouse or Keyboard can be set
Question 6: How to set the How do I set up a keyboard to be used as a mouse? In the "Start" menu, select "Settings", "Control Panel", in the "Control Panel" double-click the "Accessibility Options" icon on the "Control Panel", click the "Mouse" tab, and then click "Use Mouse Keys". This allows you to use the keyboard to control the mouse cursor, analog mouse mouse buttons are referred to the keyboard on the right side of the keypad (numeric keypad), use the NumLock key in an effective state. The following are the mouse keys:
Move 8, 2, 4, 6, 7, 9, 1, 3 keys, eight directions
Long-distance movement Ctrl + the above eight keys
Select the left mouse button/
Select the right mouse button -
Click 5
Double-click +
Drag 0 ( INS)
Release . (Del)
Question 7: How to set up keyboard and mouse in windows 7? Note 1: If your purpose of enabling the mouse button is to do something auxiliary, you can omit step (4) above. Note 2: After enabling the mouse button, a mouse icon will be displayed in the tray. 2, the mouse button open and close the NumLock key to switch. 3, the three states of the mouse button (1) the standard click state: after enabling the mouse button the system is in the state, at this time, all the operations are related to the left button, the mouse icon in the tray of the left mouse button is darkened; (2) the right click state: press the minus sign on the numeric keypad ( -) on the numeric keyboard to enter the state, at this time, all the operations are related to the right button, and the right button of the mouse icon in the tray is darkened. (3) Press the left and right buttons at the same time state: Press the asterisk (*) on the numeric keyboard to enter the state, at this time all the operations are carried out in the state of the left and right buttons pressed at the same time, the mouse icon in the tray of the left and right buttons are dimmed. To switch to the standard click state, press the numeric keyboard slash (/) key. 4, with the "mouse button" to move the mouse pointer (1) horizontal or vertical movement of the mouse pointer: press the numeric keyboard on the arrow keys; (2) along the diagonal movement of the mouse pointer: press the numeric keyboard Home, End, PageUp and PageDown keys; (3) to move the mouse pointer along the diagonal: press the numeric keyboard Home, End, PageUp and PageDown keys; (4) to move the mouse pointer along the diagonal: press the numeric keyboard Home, End, PageUp and PageDown keys. PageDown key; (3) speed up the movement: first hold down the Ctrl key, and then press (1), (2) in the key; (4) slow down the movement: first hold down the Shift key, and then press (1), (2) in the key. 5, with the "mouse button" click on the following involved in the use of the keys are referred to as the numeric keypad buttons. (1) Left click (1) left click, press 5, to double-click then press the plus sign (+); (2) right click, first press the minus sign (-) to enter the right-click state, and then press 5, and thereafter to double-click with the right button then press the plus sign (+) can be. (3) at the same time with the two mouse buttons to click, first press the asterisk (*), and then press 5, to double-click on the plus sign (+). 6, with the "mouse button" drag and drop (1) press the arrow keys to move the mouse pointer to the object to be dragged and dropped on the (2) press the Ins key to select (or grab) the object; (3) press the arrow keys to move the mouse pointer to the destination; (4) Press Del to release the object. Note: At any time you can cancel the operation by pressing the Esc key.
Question 8: How do I use the keyboard instead of the mouse? You need to memorize the shortcuts for keyboard operations. Here are some shortcuts, if you can memorize half of them, you will step into the ranks of computer experts.
Ctrl+S Save Ctrl+W Close Program Ctrl+N New Ctrl+O Open Ctrl+Z Undo Ctrl+F Find Ctrl+X Cut Ctrl+C Copy Ctrl+V Paste Ctrl+A Select All Ctrl+[Shrink Text Ctrl+]Zoom Text Ctrl+B Bold
Ctrl+I ItalicizeCtrl+U Underline
Ctrl+ShiftSwitch Input MethodsCtrl+SpaceSwitch Between Chinese and EnglishCtrl+EnterpriseSend a Message in QQ Number
Ctrl+HomeCursor Quickly Moves to the Header of a FileCtrl+EndCursor Quickly Moves to the End of a FileCtrl+EscDisplay the Start MenuCtrl+Shift+Quickly Enlarge TextCtrl+F5Force Refresh in IECtrl+Drag FileCopy File
Ctrl+BackspaceLaunch\Close Input MethodHold down Ctrl+Shift while dragging a file to create a shortcut
Alt+Space+CClose WindowAlt+Space+NMinimize Current WindowAlt+Space+RRecover Minimize WindowAlt+Space+XMaximize Current WindowAlt+Space+Move WindowAlt+Space+SChange Window SizeAlt+TabTwo Programs SwapAlt+255Enter Unknown Person in QQ No.
Alt+F Open File MenuAlt+V Open View MenuAlt+E Open Edit MenuAlt+I Open Insert Menu
Alt+ O to open the Format menu Alt+T to open the Tools menu Alt+A to open the Table menu Alt+W to open the Window menu Alt+H to open the Help menu Alt+Enter to view file properties Alt+Double-click on the file to view file properties Alt+X to close the C language Shift shortcuts
Shift+Space to switch between half\full/full/full/full/full/full/full
Shift+ Delete permanently deletes the selected item without placing it in the Recycle Bin. Press CTRL while dragging an item to copy the selection.
Press CTRL+SHIFT while dragging an item to create a shortcut for the selected item.WORD Full set of shortcut tipsCTRL+OpenCTRL+PrintCTRL+A Select All
CTRL+[/] to set the size of the text (when the target is selected)CTRL+D to set the font (when the target is selected)CTRL+G/H Find/Replace;G/H Find/Replace;G/H Find/Replace;G/Replace;G/Replace;G/Replace G/H Find/Replace;CTRL+N Full Text Delete;
CTRL+M Left Margin (with target selected);
CTRL+U Underline (with target selected);CTRL+B Bold Text (with target selected);CTRL+I Skew Text (with target selected);
CTRL+Q Align Both Sides (no first line);
CTRL+ Q both sides of the alignment (no first line indentation), (in the case of the target selected) or the cursor will be placed at the end of the paragraph of the target text, can also be operated CTRL + J both ends of the alignment (operation of the same) CTRL + E centered (operation of the same) CTRL + R right justified (operation of the same) CTRL + K to insert hyperlinks
CTRL + T / Y can be carried out to the first line of the indentation (will be the cursor to the end of the paragraph to be done, or the paragraph will be the first line of the indentation)
CTRL+T/Y can indent the first line (move the cursor to the end of the paragraph to do this operation, or the paragraph selected for operation
Ctrl+A (or Ctrl + keypad on the number 5): select the full text. Ctrl + B: to the selected text bold (press again, cancel bold). Ctrl + C: will be selected text copied to the clipboard.
Ctrl+D: open the "Font" dialog box, quickly complete the various settings of the font.Ctrl+E: to make the text of the line where the cursor is centered.
Ctrl+F: Open the "Find and Replace" dialog box, and positioned in the "Find" tab. ......
Question 9: How to set the keys on the keyboard with the mouse side buttonsHello, I also just bought a side button mouse today, the kind without drivers, same problem as you, I don't know if you solved it.
I came up with a way to do this, and it works, you can download an AUTOHOTKEY
After installing it, you can edit the script to achieve the purpose.
For example, set the sidebar 1 to be keypad 1
Copy "XButton1::Numpad1" (without the quotes) from a new text file on your desktop, close the file, change the extension to AHK, and double-click on the file, and you're good to go. For other settings you can search the internet for a tutorial, it's very simple, but very powerful.
Question 10: How to set the other mouse buttons! Find the driver of your mouse, if support can be changed, but it will be very difficult to use, if the hands of the strong can Taobao a micro-switch to remove the mouse welded on their own, a few wallet postal things