Fiber laser marking machine how to operate

Now the fiber laser marking machine is more and more favored by the major industries, more and more people began to understand and use the fiber laser marking machine. But for people who are just starting to come into contact with this machine

, may be even the most basic boot this operation will not. Although most manufacturers can provide machine training, but there are some do not provide training, or are reassigned to operate the fiber laser marking machine position

workers, then let me start from the most basic place for you to explain the most basic operation of the fiber laser marking machine.

1, open the main control box

① correctly connect the laser and connect the control card and power supply, open the power switch;

② open the main control box key switch;

③ make sure that the emergency stop switch does not open (that is, the switch pops upward, is a self-closing state);

④ open the control box laser power switch;

⑤ start the computer, and turn on the fiber laser marking machine. > ⑤ start the computer, and open the computer monitor;

⑥ start the control galvanometer power switch;

⑦ start the red light switch;

⑧ open the laser software in the computer to adjust the relevant parameters of the software for laser marking, this time to ensure that the laser working focal length (i.e., the distance from the work to the laser marking head).

It should be noted that if you do not first open the control box key switch, the vibrating mirror and red light pressed is no response.

2, the software adjustment brief description

General in the use of equipment, the user only need to adjust the laser parameter column "speed" / "current" / "frequency "

Marking speed: XX - the user's desired speed;

Power: through the laser software to set the percentage power of the laser equipment 1% - 100% adjustable;

Frequency: through the laser software to set the laser equipment's laser output frequency 10 - 100KHZ regulation.

Frequency: Set the laser output frequency of the laser device through the laser software 10-100KHZ adjustable;

The specific operation of the software can be referred to the relevant articles I posted on the official website of the Triple Laser, and I will not repeat it here.

The operation of fiber laser marking machine can be said to be very simple.