How about creating your own SolidWorks weldment contour library that is easy and simple to use and not prone to errors!

SolidWorks abbreviation (SW) is a new generation of Dassault introduced for the electrical industry design of mechanical 3D design tools. SolidWorks Chinese version of the use of a new parallel and serial product development environment and *** enjoy 3DCAD model, and is widely used in the design of parts, design of machinery and equipment, medical equipment, automotive, aerospace and other industries; SolidWorks can meet the user directly add a variety of auxiliary plug-ins, connect to a variety of NC programming software and print directly. Industry; SolidWorks can meet the user directly in the software to add a variety of auxiliary plug-ins, connect a variety of NC programming software and directly print the model of the use of demand. About the power of solidworks, in fact, I believe that many partners also have a certain understanding, but for the mastery of the software as well as the use of the software, may be a lot of partners are still scratching their heads! It doesn't matter, if you want to learn how to use solidworks, you've come to the right place. A wealth of solidworks boutique video courses, take you one by one to break through the software basic to advanced operation

solidworks popular video tutorials recommended:

Introduction to the software: Solidworks Mechanical Design introductory to master course

Interior Design: Solidworks engineering design to explain the chapter tutorials

Interior Design: Solidworks engineering design to explain the chapter tutorials

Software Introductory: Solidworks measurement tools

How to create their own solidworks weldment profile library, convenient and simple not easy to make mistakes

solidworks weldment function is very convenient to apply, but comes with the library is too little, not complete, that can not find the profiles we need to do it. Here are two ways.

First, if it is a temporary use is very simple, first create a good weldment, randomly select a profile to generate components.

Then go to the sketch in Select Features, Edit Sketch, Delete Sketch, sketch the section of the profile we need, and exit to automatically change to our profile.

The second is to create our profile library, according to the official method is, create a new part, direct sketch, and place the penetration point, that is, the weldment's frame sketch through the section of the point, you need to use the point of the command, place it where you need it, the default penetration point is the origin.

Then save as LibFeatPart file, pay attention to the path, in the installation directory SolidWorksCorpSOLIDWORKSlanglish-simplifiedweldmentprofiles folder to create their own folder, this method is very easy to report the failure of the error.

Creation failure is not yet easy to find the problem, mainly in reference to the creation failure, in order to reduce the trouble, our best way is to directly copy the existing library file to modify the cross-section, go to just the location of the installation path, just copy a library file, and then use the software to open, edit sketches, delete the old sketches, sketches their own cross-section, save to modify the filename, and then finished.

Note, the file can be placed in the default installation path, you can also set their own location, go to the settings of the file location settings.

Here is just a rough introduction, if you can not understand or failed to operate, you can watch the video I posted, which has a detailed description of the operation and points.

So, today's "how to create their own solidworks weldment contour library, convenient and simple not easy to error" on the end of sharing here! We must learn to see more, practice more, think more, learn more, I hope everyone can learn solidworks soon! Here, but also to provide you with more courses to learn, click the link: