1. Prepare materials, heat pipe radiator, processor and CPU fan. First, turn the notebook upside down, find a suitable screwdriver, and use the screwdriver to remove the baffle of CPU.
2. When the baffle is removed, we can see the CPU slot. The concave parts on the upper side and the left side are where the heat pipe radiator and the fan are installed. Install the CPU, align the pin notch on the CPU with the notch on the slot, and then insert it.
3. The next step is to install the heat pipe radiator and fan. Heat pipe provides heat dissipation for CPU and graphics card at the same time, and the heat dissipation structure of notebook is relatively simple. Align the heat pipe radiator with the CPU, fix the screw first, and then fix the screw after the heat pipe radiator is aligned, which is used as the heat dissipation part of the display core.
4. Install the fan. First, connect the fan power supply to the power connector on the motherboard, then put the fan into the groove and tighten the three screws, so that the fan can be fixed.
5, memory installation, the notebook provides two memory slots, insert the memory into the memory slots at an angle of about 40 degrees, and then carefully press down.
6. Installation of wireless network card. The installation method is basically the same as the method of installing memory. First, align the network card obliquely with the slot, then press it gently, and then we will install the antenna on the Mini PCI wireless network card.
7. The actual installation of the hard disk and optical drive. The hard disk is relatively simple. First, combine the hard disk with the protective box, and then fix the four screws around the hard disk to complete the installation. For the CD-ROM drive, just insert it into the CD-ROM drive compartment gently.