Equipment safety regulations are as follows:
1, equipment operators must be familiar with the characteristics of the use of machine tools, study and strictly abide by the safety regulations of the equipment, do not violate the rules of operation, and discourage others from unauthorized operation.
2, before going to work and after work to check the use of tools, equipment, to ensure the safety and reliability, and to achieve the correct use. Keep the work site clean, care and correct use of protective equipment.
3, before starting the machine tool to check in detail whether the dangerous parts of the machine tool guards are safe and reliable; machine tool emergency stop device, interlocking devices, safety alarm devices, automatic stopping device to ensure safety; lubricate the machine tool, and do a no-load test drive.
4, the workplace should be kept clean and organized. To be processed and processed workpiece should be placed on the shelf, can not put the workpiece or tool on the machine tool, especially can not be placed on the moving parts of the machine tool and the workplace channel, to prevent the material from dumping injuries; workpiece and tool clamping should be secure to prevent the workpiece and tooling from the fixture off; loading and unloading of bulky and heavy workpiece tooling, lifting equipment should be used.
Equipment safety:
Equipment safety refers to the safety of electrical equipment, work equipment and other equipment. Equipment safety mainly consider the following factors:
(1) the requirements of the installation of electrical devices
①The master switch, gate switch can not be installed upside down, if installed upside down, there is a possibility of automatic closing, so that the circuit is connected, when if someone is servicing the circuit will be very unsafe.
②Switches, sockets or junction boxes can not be installed directly on the building, but should be installed in a wooden box; otherwise, if the building is damp, it will cause leakage accidents.
(2) places on the use of voltage requirements
Different places on the installation of electrical equipment or facilities, maintenance, use and maintenance have different requirements. According to the degree of risk of electric shock, it can be divided into the following categories:
①No high risk of electric shock building, for example, residential, public **** place, living buildings, laboratories, instrument assembly building, textile workshop, etc.. In this place, a variety of easy access to electrical appliances, portable electrical tools, the use of voltage does not exceed 220 V.
② high risk of electric shock building, for example, metal workshop, forging workshop, furnace workshop, pump room, power distribution, compressor station. In such places, a variety of easily accessible electrical appliances, portable electrical tools, the use of voltage does not exceed 36 V.