First, refuse to crash fourteen strokes
1. Ensure that the correct Bios settings. Bios inside the settings must be appropriate, the wrong Bios settings will make you in the running of Windows when the crash.
2. Always check the contact condition of your computer parts. Running the system with a poor card contact will cause the system to crash, so when replacing computer parts, make sure the card is in full contact with the motherboard.
3. Clean the case regularly. Too much dust will make poor contact between the boards, causing the system to crash during operation, so the chassis should be cleaned at all times, do not let too much dust accumulate in the chassis.
4. Insist on careful virus checking. On the CD-ROM or floppy disk of unknown origin, do not use easily, on the mail attachments, to first use antivirus software to check before opening.
5. Turn off your computer in the correct order. In the application software before the end of the normal operation, do not turn off the power, otherwise it will cause damage to the system files or lost, caused in the startup or operation of the crash.
6. Avoid multitasking. Do not run other software during the execution of disk organization or check the hard disk with antivirus software, otherwise it will cause a crash.
7. Do not overdo it. A variety of hardware drivers do not have to be updated at any time, because only the development of the driver is often inside the bug, will cause damage to the system, causing the system to crash, the latest is not necessarily the best.
8. In the uninstallation of software, the use of self-installation of the anti-installation program or Windows inside the installation / uninstallation method, do not directly delete the program folder, because some of the files may be other programs **** enjoy, once the deletion of these **** enjoy the file, it will result in the application of the software can not be used and crash.
9. When setting up a hardware device, it is best to check if there is a reserved interrupt (IRQ), and do not allow other devices to use this interrupt number, so as not to cause interrupt conflicts, resulting in system crash.
10. When surfing the web, do not open too many browser windows, otherwise it will lead to insufficient system resources and cause the system to crash.
11. If your machine's memory is not very large, do not run programs that take up a large amount of memory, such as Photoshop, otherwise it is easy to run when the crash.
12. For system files or important files, it is best to use the implicit attributes, so that the wrong operation to delete these files, causing the system to crash.
13. When modifying the hard disk master boot record, it is best to save the original record first, to prevent the failure of the modification and can not restore the original boot record.
14. CPU, graphics card and other accessories generally do not overclock, if you do need to overclock, pay attention to overclocking the temperature of the board after the card, the CPU, graphics card and other long-term in the non-normal frequency and temperature of the work of the automatic reboot or crash, the heavier burned CPU, graphics card, motherboard.
Second, talk about how to effectively reduce the computer's dead
The computer's dead phenomenon is a computer enthusiasts have a headache.
The frequent blue screens, frequent crashes, and reboots of the computer are really tiresome. In addition, frequent reboots of the computer bring about hardware wear and tear that is several times greater than normal operation, which greatly increases the chance of hardware damage.
But with Windows 9X, crashes are an unavoidable occurrence, due to the instability of the core of the Windows 9X operating system itself.
Although crashes are unavoidable, but the author in the long and hard struggle with the crash, or summarize some of the ways to effectively reduce the computer crash, do not dare to share, specially written to dedicate to the readers, I hope that everyone's computers can be reduced to some crash, more stable.
There are many reasons for the crash, but in general there are two categories: hardware and software reasons. I'm going to talk to you about them separately.
Hardware
1. Nowadays, CPUs and graphics cards have a good overclocking performance due to the new process, but overclocking is very easy to cause system instability and even crash (damage to hardware aside). The overclocking phenomenon caused by the crash, should be timely to downscale, or restore its rated operating frequency, to ensure that the computer stable work.
2. When replacing computer parts, after the installation is complete, be sure to double-check that the hardware has been plugged in to prevent poor contact with the computer from crashing.
3. Sometimes the conflict between the various hardware caused by the crash, this time to try for the card to refresh the new version of the BIOS, update the driver or change the interrupt number of the device in the system, if you can not, please replace the hardware.
4. The motherboard's BIOS must be properly configured. Although many newspapers, magazines, and websites now teach how to set the BIOS to the optimal setting, the optimal setting is not necessarily the most stable one. If the BIOS is set improperly and causes a crash, you should immediately restore the BIOS to its factory default settings.
5. Computer hosts must be equipped with high-quality high-performance power supply, because now the computer accessories are more power consumption, especially when overclocking, power consumption will multiply, if the power supply power is insufficient, the hardware will appear to be insufficient power supply, thus causing the crash.
6. In the case of smaller memory (less than 128M), it is best not to run more memory-intensive software and games or to run multiple programs at the same time, as this will result in insufficient physical memory, which can lead to crashes.
7. Before upgrading your motherboard or graphics card's BIOS, be sure to check that the version number of the BIOS you are upgrading is correct for your card's model number, and strongly recommend backing up your original version, just in case.
8. The air contains a lot of dust, and over time the chassis will accumulate a lot of dust, which should be cleaned up in a timely manner, otherwise it will seriously affect the heat dissipation effect, and the dust will cause short circuits in contact with the board circuitry, which will lead to a crash.
9. "Closely monitor" the temperature of each accessory, especially in the summer, when the weather is hot, if the accessory temperature is too high, it will cause the crash.
Software
1. For unknown software, CD-ROMs, or pirated software, do not use it easily, so as not to infect the computer virus, causing the crash.
2. Be sure to shut down your computer normally, and never turn off the power directly, otherwise it will easily cause the system files to be lost or corrupted, resulting in a crash.
3. When removing software, do not remove the directory where the software is located directly, this will leave a lot of garbage on the hard disk and registry, and over time, more and more will be set, resulting in a heavier burden on the system, and finally the system will be overwhelmed and crash. The right way to do this is to use the uninstaller that comes with the software to remove the software.
4. After running the computer for a long time, or if the system resources are low, if you want to run a large software, you must restart the computer first, otherwise it will be caused by the lack of system resources and crash.
5. It is better to use less beta versions of software or hardware drivers, because beta versions have a lot of bugs and instability, which can lead to crashes.
6. For system files, it is better to use the hidden attribute, so that the system files will not be deleted by mistake and lead to crash.
7. When surfing the web, don't open too many web pages at once, so as to avoid overloading the system, which can lead to crash. In addition, do not open some not very clear web page, because it may contain some malicious code, to modify the system, which will lead to crash.
Well, the way to prevent the crash is introduced to you, and I hope that every reader will help
Third, a comprehensive understanding of the causes of computer crashes
The crash is something that makes the operator quite annoyed. The performance of the crash is mostly "blue screen", can not start the system, the screen "freeze" unresponsive, the mouse, the keyboard can not be input, the software operation is not normal interruption. Although the cause of the cause of death is multi-faceted, but the same thing, the cause of the hardware and software can never be detached from the two aspects.
Hardware causes by the crash
Poor heat dissipation monitor, power supply and CPU in the work of the heat is very large, so it is very important to maintain good ventilation, if the monitor is overheated will lead to color, image distortion and even shorten the life of the monitor. Working time is too long will also lead to power supply or monitor heat dissipation is not good and cause the computer to crash. CPU heat dissipation is related to the stability of computer operation is an important issue, but also thermal failure occurs in the "hardest hit". The computer is not moving properly in the process of moving by a lot of vibration will often make the machine internal device loose, which leads to poor contact, caused by the computer crash, so move the computer should be avoided violent vibration.
Dust killers can also cause excessive dust in the machine to crash. If the floppy drive head or the optical drive laser head is contaminated with too much dust, it can lead to read and write errors, and seriously cause the computer to crash.
Equipment mismatch such as motherboard and CPU frequency mismatch, the old motherboard overclocking will be too high external frequency, may not be able to ensure the stability of the operation, and thus lead to frequent crash.
Hardware and software incompatibilityThree-dimensional software and some special software, some microcomputers may not be able to start or even install, which may have hardware and software compatibility issues.
Memory stick failure is mainly due to the loose memory stick, false soldering or the quality of the memory chip itself. You should exclude the memory stick contact failure according to the specific situation, and if there is a problem with the quality of the memory stick, you need to replace the memory in order to solve the problem.
Hard disk failure is mainly due to hard disk aging or due to improper use of bad sectors, bad sectors. This makes it easy for the machine to crash during operation. You can use a special tool software to troubleshooting, such as serious damage can only replace the hard disk. In addition, for motherboards that do not support UDMA66/100, you should pay attention to the setting of the hard disk operation mode in CMOS.
CPU overclockingOverclocking increases the operating frequency of the CPU, while at the same time, it may also make its performance unstable. The reason for this is that the CPU's ability to access data in memory is already faster than the speed at which the memory can exchange data with the hard disk, and overclocking makes this contradiction even more pronounced, exacerbating the problem of not being able to find the data you need in memory or virtual memory, which can lead to "abnormal errors". The solution is, of course, relatively simple: return the CPU to its normal frequency. Hardware resource conflicts are caused by conflicting settings on the sound card or display card, resulting in an exception error. In addition, conflicts with interrupts, DMAs, or ports of other devices may cause a few drivers to generate anomalies, resulting in a crash. The solution is to start in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". The solution is to start in "Safe Mode" and make appropriate adjustments in "Control Panel" → "System" → "Device Management". For abnormal errors in the driver, you can modify the registry. Select "Run", type "REGEDIT", enter the registry editor, through the menu under the "Find" function, find and delete all the "primary key" related to the driver prefix string. The driver's prefix string is a "primary key" and a "key value", so you can reboot.
The memory capacity is not enough. The larger the memory capacity, the better, it should be no less than 0.5-1% of the hard disk capacity, if there is a problem in this regard, you should replace the memory stick with the largest possible capacity.
Poor quality parts A few unscrupulous businessmen in the assembly of compatible machines to customers, the use of low-quality boards, memory, and some even sell counterfeit motherboards and Remarks over the CPU, memory, such a machine in the operation of the unstable, the occurrence of crashes is inevitable. Therefore, the user should be vigilant when purchasing a machine, and can use some of the newer tools and software to test the computer, a long time continuously test machine (such as 72 hours), as well as to strive for as long as possible warranty time, etc..
The software causes the crash
Virus infection virus can make the computer work sharply reduced efficiency, resulting in frequent crash. At this point, we need to use antivirus software such as KV300, Kingsoft, Rising Star, etc. to carry out a comprehensive check of the virus, antivirus, and to do regular upgrading of antivirus software.
The CMOS is not set up properly, the failure is very common, such as hard disk parameter settings, mode settings, memory parameters are not set up properly, resulting in the computer can not start. The first step is to set the memory to have ECC function, which will cause the computer to crash due to the memory error.
Mistaken deletion of system files due to Windows 9x startup requires Command.com, Io.sys, Msdos.sys, etc. If these files are corrupted or mistakenly deleted, it will not help even if the various hardware settings are correct in CMOS. The solution is to use a boot disk with the same version of the operating system to start the computer, and then type "SYSC:" to re-transmit the system files.
Initialization files are corrupted because Windows 9x boot needs to read System.ini, Win.ini, and registry files, and if there is a Config.sys, Autoexec.bat file, these two files will also be read. As long as there are error messages in these files can be dead, especially System.ini, Win.ini, User.dat, System.dat these four files are particularly important.
Dynamic Link Library (DLL) lost in the Windows operating system, there is a class of files is also quite important, this is the extension of the DLL dynamic link library files, these files from the nature of the nature of the class belongs to the enjoyment of the file, that is to say, a DLL file may have more than one piece of software in the run-time need to call it. If we delete an application software, the software's anti-installation program will record the files it has installed and ready to delete them one by one, it is easy to be deleted dynamic link library file at the same time will also be used by other software situations, if the missing link library file is more important core link file, then the system will crash, or even crash. We can use tools such as "Super Rabbit" to delete useless DLL files, so as to avoid accidental deletion.
The remaining space on the hard drive is too small or too fragmented. If the remaining space on the hard drive is too small, because some applications need a lot of memory to run, so you need virtual memory, and virtual memory is provided by the hard drive, so the hard drive should have enough remaining space to meet the needs of virtual memory. In addition, it is also important to keep a close eye on your computer's performance, so that it can be used as a reference point in your PC's performance.
BIOS upgrade failures should be backed up with a BIOS backup in case something goes wrong, but if your system requires a BIOS upgrade, it's a good idea to make sure the BIOS version you're using is compatible with your PC before you upgrade. If the BIOS is not upgraded correctly or there is an unexpected power failure during the upgrade process, then your system may not boot. So make sure you know the BIOS model number before upgrading the BIOS. If the BIOS upgrade utility you are using can make a backup of the current BIOS, then make a copy of the previous BIOS on a disk. Also see if your system supports BIOS recovery and know how to do it.
Improper software upgrades Most people may think that software upgrades are not a problem, but in fact, during the upgrade process, some of the components are upgraded, but other programs may not support the upgraded components, leading to various problems.
It is better to use the beta version of a software less often, because the beta software usually has some bugs or is not stable enough in some aspects, and after using it, you will lose the data of the program errors, crash, or the system will not start.
If you uninstall software illegally, don't delete the directory where it was installed. If you do, there will be a lot of garbage in the registry and in the Windows directory, and over time, the system will become unstable and cause crashes.
Using pirated software can hide viruses that, when executed, can automatically modify your system and cause it to crash.
Defective applicationsThis is common when running 16-bit applications in Win98 that work well in DOS or Windows 3.1.Win98 is 32-bit, and despite its claims of compatibility, there are many things that cannot be reconciled with 16-bit applications. There are also cases where a peripheral driver that works fine under Win95 may have problems when the operating system is upgraded, causing the system to crash or not boot properly. In this case you should find a new version of the peripheral driver.
There are too many programs started which depletes the system resources, so that the data needed by individual programs cannot be found in memory or virtual memory, and abnormal errors can occur.
Illegal operation to illegally open or release the program in question with an illegal format or parameters can also cause the computer to crash. Please be careful to keep in mind the correct format and related parameters, and do not open and release unfamiliar programs at random.
Do not use the power button directly on the chassis when shutting down the computer abnormally, as this may result in damage or loss of system files, cause auto-boot, or cause the computer to crash during operation. This is very important for systems such as Windows 98/2000/NT, which can cause a system crash in severe cases.
In-memory conflicts sometimes run a variety of software are normal, but suddenly and inexplicably crash, restart after running these applications and very normal, this is a fake crash phenomenon. The reason for the emergence of more than Win98 memory resource conflicts. As we all know, the application software is running in memory, and close the application software can be released after the memory space. But some applications due to the design of the reason, even after the closure of the memory can not be completely released, when the next software needs to use this piece of memory address, there will be a conflict.
Four, boot black screen of the general solution
First, check the power supply, computer power supply, power supply interface
1, check the chassis power supply interface and power cord is intact, if the excuse and the power cord is broken, broken should be replaced in a timely manner.
2, check the motherboard power cord socket, if there is no damage to the socket will be pulled out and then inserted, press the power switch, gently move the power cord to see if there is a response to determine whether it is because of poor contact with the power cord or loose soldering leads to the power is not connected.
3, using the replacement method, the power supply to other machines to try, you can also use a good power supply to the machine to see if it can start to determine the power supply is good or bad. Pay special attention to check whether the switch on the power supply is connected, some power supply is with a switch.
Two, using the minimum system method
1, the motherboard will be taken down, the first brush (quality should be good, never hair, I have encountered because the brush off the hairs fall into the graphics card slot caused by the graphics card does not work and the black screen of the man-made faults) to clean, but it is best to use the wind blowing the wind of the cold wind gear blowing, with the skin tigers can also be cleaned, a lot of dust because of faults caused by! This cleaning, many of the faults caused by dust will naturally be resolved!
2, the CPU, memory stick, graphics card inserted, see whether the machine is lit. At the same time, you can use the replacement method, will be a good CPU, memory sticks and graphics cards plugged in the test, to determine where the fault lies. At this time for some of the CPU-related jumpers (hard jumper) should pay special attention to whether the settings are correct. Especially in the case of upgrading the CPU, it is important to see if the motherboard supports the new CPU, so as not to set the voltage too high and burn the CPU.
3, if the minimum system, the machine still does not light, and to determine the CPU (jumper settings are also correct), graphics cards, memory sticks are intact in the case, you should suspect that the motherboard problem. The main reason for this is the fact that it is a very important part of the process, and it is a very important part of the process, and it is a very important part of the process.
Fifth, the computer is dead 14 kinds of cases to determine the code
Each use of computers have more or less encountered the problem of dead, the following is a common dead situation for your reference:
◆ Situation 1: the board, the card contact is poor, loose, or the board's slot is bad, or simply display card, memory and other accessories are bad, resulting in the display does not light.
◆ Situation 2: Voltage fluctuation is too large, resulting in the board, the card on the current or big or small, sometimes will damage the hardware. So it is vital to choose a power supply that can play a role in overvoltage protection, or add a voltage regulator.
◆ Situation 3: Peripherals such as printers, burners, scanners, etc. are broken, but plug-and-play technology allows the system to detect these devices at startup resulting in a crash.
◆Situation 4: Overclocking over the fire, sometimes the display does not light up, sometimes it is into the system after the crash, the serious case will lead to the CPU is burned.
◆Situation 5: If the host is running normally, there is also the sound of the hard disk running, but the monitor does not light up, it may be a bad monitor, or the monitor signal line contact is not good or bad, or it may be the monitor power supply is not plugged.
◆ Situation 6: boot only hear "tick, tick" a single long sound, it is estimated that the memory problem, change a slot to try, still not work, it may be bad memory.
◆Situation 7: windows95, 98 system needs to be part of the hard disk as virtual memory, hard disk space is too small, will also lead to crash.
◆Situation 8: Virus causes crash.
◆Situation 9: Software bugs cause crashes.
◆ Case 10: Running software conflicts with each other, such as 16-bit and 32-bit software running at the same time may cause a crash.
◆Situation 11: When online, hackers invade.
◆Situation 12: System System and other subdirectories in the chain file .Dll lost, resulting in Windows system paralysis.
◆Scenario 13: Incorrectly modified system registry information, resulting in Windows not starting.
◆ Scenario 14: The machine runs too slowly, causing the illusion of a crash.
Six.
Preventing computer crash twenty-five strokes
1. Installing too many operating systems on the same hard disk can cause the system to crash.
2, CPU, graphics cards and other accessories do not overclock too high, pay attention to the temperature, otherwise, in the start or run will somehow restart or crash.
3, in the replacement of computer accessories, be sure to plug, because poor contact with the accessories will cause the system to crash.
4, BIOS settings should be appropriate, although it is recommended to set the BIOS settings to the optimal, but the so-called optimal is not the best, sometimes the optimal settings will cause the startup or running dead.
5. It is best to have a stabilized power supply to avoid unstable voltage.
6. If you have the conditions, install a UPS so that the computer does not crash after a power outage.
7, the origin of the floppy disk and CD-ROM, do not easily use, E-mail attached to the software, to use KV300, Rising Star and other anti-virus software to check before using, so as not to infect the poison, is the system crash.
8, in the application software is not the end of the normal, do not turn off the power, otherwise it will cause damage to the system files or lost, causing automatic startup or run in the crash. This is very important for systems such as Windows 98/2000/NT.
9, in the installation of applications, if there is a dialog box "whether to cover the file", it is best to choose not to cover. Because usually the current system file is the best, can not be based on the time to decide to cover the file (unless you are very concerned about the time of the file).
10, in the uninstallation of software, do not delete *** enjoy the file, because some *** enjoy the file may be used by the system or other programs, once you delete these files, it will make the application software can not be started and crash, or the system running dead.
11. When setting up a hardware device, it is best to check if there is a reserved interrupt number (IRQ), and do not allow other devices to use this interrupt number, otherwise it will cause an IRQ conflict, which will cause the system to crash.
12, in loading some software, pay attention to the order of priority, due to some software programming is not standardized, in the run can not be ranked first, but to be placed in the last run, so as not to cause confusion in the management of the system.
13, in the running of large applications (such as OFFICE 2000), do not run in the running state to exit the previously running program, otherwise it will cause the collapse of the entire Windows98 system.
14, in the case of smaller memory (such as 4MB-16MB), it is best not to run applications that take up a large amount of memory, otherwise it is easy to crash when running. It is recommended that when running these programs you should save the files you are currently using in a timely manner.
15. For system files or important files, it is best to use the implicit attribute, so as not to delete or overwrite these files by mistake.
16. When modifying the hard disk master boot record, it is better to save the original record first, so as to prevent the original hard disk master boot record from being recovered due to modification failure.
17. It is better to use the beta version of the software less often, because the beta version is not stable enough in some aspects, and it will make the system unable to start after using it.
18. Try not to run 16-bit applications in Windows 95/98, because 16-bit applications will conflict with 32-bit applications in Windows, which can cause crashes or failure to boot.
19. Before upgrading the BIOS, you should determine the version of the BIOS to be upgraded, and save the original version to avoid upgrading errors that prevent the system from booting.
20, try not to use pirated software, because these software hides a lot of viruses, once executed, will automatically modify your system, so that the system in the operation of the crash.
21, in the chassis, may contain a large amount of dust, dust, if contact with the accessories of the circuit, will make the system unstable or dead.
22. Don't run large applications after performing disk defragmentation, as this will cause the system to crash.
23, with antivirus software to check the hard disk during the period, do not run other applications to prevent the system crash.
24. When surfing the web, don't open too many browsing windows at once, resulting in insufficient resources and causing a crash.
25, when shutting down the computer, do not directly use the power button in the chassis, because the direct use of the power button will cause the loss of files, so that the next time you can not start up properly, thus causing the system to crash.
Frequent crash friends, please try the above methods, I believe that we will have some help, sometimes to take different countermeasures for specific situations, not to be rigid Oh.
Seven, dead without worrying, here for you to completely solve the failure of the dead
Whether it is compatible with the machine or the machine license plate machine, in the process of using the inexplicable phenomenon of the death of the machine. The computer is a more common failure phenomenon, but also a difficult problem that is not easy to solve. Especially when the computer is dead, at this time we can not use the software or tools to detect the machine, maintenance is often a headache.
I. The general performance of the computer crash:
1) no host no response after power, the power indicator does not light up, the fan does not turn;
2) the system can not start normally, in the start-up process, suddenly the screen stalled;
3) in the start-up process, or in the process of using the monitor black screen monitor black screen;
4) the image of the "frozen", do not update, but the keyboard lights can be opened and closed;
5) the computer can be used to monitor the computer's performance.
5) Keyboard lockout;
6) Mouse can move normally but the host does not respond;
7) Software operation is not normally interrupted;
8) Frequent blue screen.
9)Frequent memory errors or overflows.
How can we quickly troubleshoot and get the machine back to normal operation?
II. Failure performance
Specifically, the phenomenon of dead machines can be divided into hardware and software.
1. Hardware
Hardware caused by the crash often have: utility voltage instability, the host power supply output voltage is too low or too high, the temperature inside the chassis is too high, the memory temperature is too hot, the CPU temperature is too high, overclocking, interference, the peripheral itself has a fault, the board has poor contact, the host and peripheral connected to the data line contact is poor.
(1) utility voltage instability
The computer voltage operating range is generally between 180V-240V, when the voltage is lower than 180V, the switching power supply output voltage is too low or protection, the host is easy to reboot or automatic shutdown; when the voltage is higher than 240V, the utility input voltage exceeds the permissible range of power supply of the host, but due to the discrete nature of the circuitry, the power supply may also be Discrete, this time the power supply may not have protection, then the secondary power supply output may be high, the same will cause the phenomenon of death.
(2) The host power supply is not completely damaged
When the host power supply internal circuitry is damaged, the voltage output may be biased or current output is insufficient, resulting in insufficient payload rate, which will also produce the phenomenon of crash. Currently, most of the switching power supplies used in computer hosts use TL494 or similar PWM control chips, and the comparator generally uses LM339 or LM393 to control the host to determine whether to send a switching signal. The chip has a fault, there will be a short circuit with a wire we use the green and black wires (some books require the use of 100O resistors, in fact, there is no need, the power supply internal circuit has been connected to the 2K or so of the resistor, even if it is shorted, the current is only a few milliamps), the power supply fan work, using a multimeter to measure the output voltage of each circuit is also basically normal. But after accessing the circuit, the power supply can not work properly. This is mainly because the chip is damaged, the voltage sampling error, can not be timeless with heavy loads due to, as long as the replacement of the same type of chip can be.
I have encountered a miscellaneous switching power supply, the use of a year and a half or so, the host often crash or can not start, and finally check the switching power supply, found that the output of the +5V up to 5.86V, and +12V is only 9.9V, such as this power supply does not crash is strange, fortunately, did not burn the motherboard.
(3) Poor cooling in the chassis
Too much dust in the chassis can also lead to system failure. Dust is the enemy of the computer, too much dust attached to the surface of the CPU, chip, fan will lead to poor cooling or poor contact with these components; at the same time, the dust on the printed circuit board in a humid environment often lead to short circuits. Both situations will lead to the phenomenon of crash. This situation is common in some of the old computer placed in a year or two years and then open what reaction is not or after the boot "tick" screaming, there is a machine to the summer after the phenomenon of frequent crashes.
Because the PIV computer's CPU temperature sensor is integrated into the CPU, its temperature measurement is accurate, so a boot CPU temperature is generally about 50, much higher than the SOCKET 370 CPU detection temperature (about 30). However, because the PIVCPU's heat generation is large, in the selection of the CPU fan must be based on the type of CPU to select the appropriate CPU fan, do not let the emergence of a small horse-drawn car situation, or crash constantly.
Solution: We can use a brush to sweep away the dust, and then use a hairdryer (cold wind gear) to clean up the gray tip of the board.
Note: Do not leave the bristles and cotton of the brush and cotton swabs on the board and components to become a new source of crash failures. If we can clean the dust inside the host computer and monitor once a year, our favorite machine will not strike for no reason.
(4) Overclocking
Many DIY friends like to improve the performance of their computer by overclocking, so they can do more with less. However, there is also a big risk that the CPU, memory, and hard drive will be completely destroyed if they are not used.
I had an overclocking experience, the 66 frequency of the motherboard hard super on the 83 frequency, the beginning of the use of the effect is good, when I I am for their own little test and complacent, two days later, suddenly in the run, the system prompted to find the hard disk. At first I didn't care, then more and more often, and finally in CMOS can't find the hard
.