Special equipment should be established by the use of special equipment safety technology files include the following five documents:
"Chinese People's Republic of China *** and the State of Special Equipment Safety Law" Article 35 special equipment should be established by the use of special equipment safety technology files. Safety technology files shall include the following:
(a) special equipment design documents, product quality certification, installation and use of maintenance instructions, supervision and inspection certificates and other relevant technical information and documents;
(b) regular inspection of special equipment and regular self-inspection records;
(c) the daily use of special equipment condition records;
(d) special equipment and its ancillary instrumentation maintenance records;
(e) special equipment operation failure and accident records.
"Chinese People's *** and State Special Equipment Safety Law" Article 83 violation of the provisions of this law, the use of special equipment, one of the following acts, shall order rectification; overdue rectification, shall order the cessation of the use of special equipment, impose a fine of more than 10,000 yuan 100,000 yuan:
(a) the use of special equipment is not in accordance with the provisions of the use of registration;
(b) failure to establish a special equipment and its affiliated instruments maintenance records;
(e) operation faults and accident records.
(A) the use of special equipment is not in accordance with the provisions of the registration;
(B) the establishment of special equipment safety and technical files or safety and technical files do not meet the prescribed requirements, or not set up according to the use of the registration mark, the regular inspection mark;
(C) the use of special equipment for regular maintenance and regular self-inspection, or the use of special equipment for safety accessories, safety protection devices for regular calibration, overhaul, and to make a Records;
(d) not in accordance with the requirements of the safety specifications and accept timely declaration of inspection;
(e) not in accordance with the requirements of the safety specifications of the boiler water (media) treatment;
(f) not to develop special emergency response to accidents of special equipment plan.
Special equipment operating procedures:
1, before the operation of the equipment, do a good job of all pre-operation checks, including: power supply voltage, the state of each switch, safety guards and the site operating environment. Abnormalities found should be dealt with in a timely manner, and it is prohibited to run the equipment without checking.
2, equipment operation, according to the provisions of the strict record of operation records, according to the requirements of the inspection of the operating conditions of the equipment as well as the necessary testing; according to the principle of economic and practical work, adjusting the equipment is in the best working conditions, reduce the energy consumption of the equipment.
3, when the equipment failure, should immediately stop running, while immediately reported to the competent leadership, and as soon as possible to remove the fault or repair, to ensure the normal operation of the work. It is strictly prohibited to run the equipment in a faulty state.
4, due to the action of the equipment safety protection devices, resulting in equipment stop running. Should be based on the fault display to carry out the appropriate troubleshooting. A moment difficult to deal with, should be reported to the leadership at the same time, the organization of professional and technical personnel to troubleshoot the fault, and according to the results of the troubleshooting, repair faulty equipment. It is prohibited to force power supply and operation in case of unclear faults.
5. When an emergency situation occurs in the equipment that may jeopardize personal safety, the operator should immediately evacuate the operation site after taking the necessary control measures to prevent casualties.