The equipment required for the dust-free workshop includes fresh air system filter box, buffer area door installation electronic device self-locking interlock, negative ion purifier, etc.
1. Fresh air system filter box
The fresh air system filter box is a filtration device for oil and water particles. The filter system provides respirator users with Class D quality air. The first stage filters out water and particles, the second stage condensation filter eliminates oil mist and ultra-fine particles, and the third stage removes organic gases and odors. Filter change indicators are standard on all three stages.
2. The buffer area door is equipped with electronic self-locking interlocking
After the contactor coil is energized, its own normally open auxiliary contact is used to keep the circuit connected. Generally The object is the control of its own circuit. For example, if the normally open auxiliary contact is connected in parallel with the start button, when the start button is pressed, the contactor will act, the auxiliary contact will close, and the state will be maintained. At this time, if the start button is released, the Shanghai door will interlock and the contactor will not Will lose power and disconnect.
3. Negative ion air purifier
The negative ion air purifier is an environmentally optimized appliance that uses its own generated negative ions to purify, remove dust, deodorize and sterilize the air. The difference from traditional air purifiers is that they use negative ions as an active factor to actively capture harmful substances in the air. Traditional air purifiers use fans to draw air and use filters to filter dust to purify the air.
Dust-free workshop
The equipment in the dust-free workshop is reasonably configured. There are dedicated personnel to keep valuable instruments and establish instrument files, and provide instructions for operation, maintenance, repair, registration and use of this manual. Do regular maintenance, maintenance and inspections.
Precision instruments cannot be moved freely. If they need repair, they must not be dismantled or damaged without permission. A report should be written and notified to the management. The department responsible for completing the repair consent application will send the instrument for repair. After use of various devices (refrigerators, except temperature boxes), the power should be cut off immediately, the knobs should be returned to home and checked carefully before leaving.