1. Tank body: the tank body is the main part of cryogenic liquid oxygen storage tank, usually made of stainless steel, with good corrosion resistance and sealing performance.
2. liner: the liner is the liquid oxygen storage container inside the tank body, usually made of stainless steel, with good corrosion resistance and thermal conductivity.
3. Adiabatic layer: The adiabatic layer is the heat insulation layer between the tank body and the inner liner, which is usually composed of multi-layer insulating materials to reduce the evaporation of liquid oxygen and maintain the low temperature environment inside the tank.
4. Liquid level meter: liquid level meter is used to measure the level of liquid oxygen in the storage tank, usually adopts float type or pressure type liquid level meter.
5. Pressure sensor: the pressure sensor is used to measure the pressure of liquid oxygen inside the tank to ensure the pressure inside the tank is stable.
6. Pressure Relief Valve: The pressure relief valve is used to discharge the excess gas when the pressure inside the tank is too high to ensure the safety of the tank.
7. piping system: the piping system is used to transport the liquid oxygen from the storage tank to the place where it is needed, usually including the inlet pipe, outlet pipe, liquid level pipe and so on.
8. Control system: The control system is used to monitor the liquid level, pressure and other parameters inside the storage tank, and control the operation of the pressure relief valve, liquid level meter and other equipment to ensure the safety and stability of the storage tank.
The above is the cryogenic liquid oxygen storage tank equipment configuration list, different tanks may have some differences, but basically include the above parts. When using cryogenic liquid oxygen storage tanks, you need to pay attention to the safe operation procedures to ensure the safety of personnel and equipment.