Electric leakage protector c32 means that the starting current is 32A.
Leakage protector c32 means that the circuit breaker will trip if the current exceeds 32A. Leakage protector, referred to as leakage switch, also known as leakage circuit breaker, is mainly used in the equipment leakage faults as well as a fatal risk of personal electrocution protection, with overload and short-circuit protection, can be used to protect the line or motor overload and short-circuit, can also be used as an infrequent conversion of the line under normal circumstances to start.
Leakage circuit breaker is a circuit leakage current exceeds a predetermined value can be automatically actuated switch. Commonly used leakage circuit breaker is divided into voltage type and current type two categories, and the current type is divided into electromagnetic type and electronic type two. Leakage circuit breaker used to prevent personal electric shock, should be based on direct contact and indirect contact with the two kinds of electric shock protection of different requirements to choose. Voltage-type earth leakage circuit breaker for transformer neutral point is not grounded low-voltage power grid. It is characterized by a relatively high voltage on the zero line to ground when a person is electrocuted, causing the relay to operate and the power switch to trip.
Hardware model: earth leakage protector 100aDZ47LE
System version: earth leakage protector system
Electrical leakage protector c32 means that the starting current is 32A.
Currently, families use DZ series air switches (small circuit breakers with earth leakage protection), commonly available in the following models/sizes: C16, C25, C32, C40, C60, C80, C100, C120 and other specifications.
Which C indicates the disconnecting current, that is, the starting current, for example, C32 indicates the starting current is 32 A. Generally, the installation of 6500W water heater to use C32, the installation of 7500W, 8500W water heater to use the C40 air-circuit.
Common models in the industry are: DW and DZ types for power circuits are divided into 20, 32, 50, 63, 80, 100, 125, 160, 250, 400, 600, 800, 1000... (unit A).