The expiration date is: 2 years.
It is a common medical consumable that has been aseptically processed to establish a channel between the vein and the medicinal solution for intravenous infusion. Generally by the intravenous or hypodermic needle, needle cap, infusion hose, medication filter, flow rate regulator, dropper, stopper puncture, air filter and other eight parts of the line, some infusion devices and injection parts, adding medicine mouth, and so on.
Basic introduction Chinese name ：一次性使用无菌输液器 Foreign name ：disposable infusion set配针规格 ：单翼输液针，双翼输液针，注射针 Use ：临床重力式输液 Apparatus specifications，制作材料，产品用途,工作原理,操作方法,注意事项, Apparatus specifications Ordinary infusion set，barrel infusion set，bag infusion set，dropper infusion set，barrel infusion set，dropper infusion set，dropper infusion set，dropper infusion set，dropper infusion set，and so on. Pouch Infuser, Burette Infuser, Light Protected Infuser, Precision Filter Infuser, Air Purifying Infuser, etc. Materials Traditional infusion sets are made of PVC, and high performance polyolefin thermoplastic elastomers (TPEs) are considered to be a safer and higher performance material for making disposable infusion sets. There is now a material that is DEHP-free and is being promoted nationwide. Inlet Hole Infuser Style Product Use This product is used with disposable IV needles, mainly for clinical gravity infusion. Principle of operation Under the action of atmospheric pressure, the liquid in the bottle flows into the drip bucket along with the thin infusion hose, and when the pressure of the water column in the drip bucket is greater than the venous pressure, the liquid in the bottle flows into the vein along with the hose. Operation method Medical personnel check the sterilization expiration date of the disposable infusion set and the package for air leakage and other abnormalities before use, take out the infusion set, partially insert the insertion needle into the infusion bottle (such as infusion bag, unless it is an infusion set with an integrated inlet tube and insertion needle, there is no need to open the inlet device, that is, to insert the inlet needle or to open the inlet holes), hang the bottle on the infusion pole, exhaust the liquid to the lower end of the infusion tube, and then close it. Adjust the regulator, then insert the intravenous needle into the sterilized vein, fix it well, untie the tourniquet and adjust the flow rate. Attention 1. It is a disposable product and should comply with the corresponding national health and quality standards. 2. Prohibit cross use 3. Disposable infusion set should be treated as medical waste after use.