System emergency plan example
In daily learning, work or life, it is inevitable that some events will not occur in their own expectations, in order to control the development of the accident situation, from time to time to carry out in advance the preparation of emergency plans. Preparation of emergency plans need to pay attention to what problems? The following is my compilation of system emergency plan example, I hope to help you.
System emergency plan 1
In order to improve the hospital's internal self-prevention, self-rescue capabilities, so that all staff can understand and master the characteristics of the fire, in the event of fire accidents, can do a planned, step-by-step, accurate, timely and effective fight, so that the fire damage is reduced to a minimum, according to: "prevention first, prevention and elimination of the combination of
A key part of the fire fighting emergency measures
1, the ward fire accident, the first thing should be to stabilize the mood of the staff, so as to avoid confusion and cause greater losses, to do the "first to save people, after saving things, The principle of "first patient, after staff". The evacuation of the scene and the evacuation of materials in order, do not scramble, crowded, not to block the channel, self-inflicted injuries, resulting in undue tragedy. When a fire occurs the person in charge of the ward and the volunteer firefighters should quickly arrive at the scene, organize the personnel to fight the fire and arrange for the alarm. When the fire people trapped, do not jump to escape, you can be set, sheets, curtains or other available ropes fastened, grab the rope and slide down to a safe place.
Once the fire accident occurred in the ward, the following plan steps should be implemented:
① First of all, to understand the direction of the fire, location, cause, combustion materials and so on.
② department staff quickly divide the work, a person notify the hospitalized patients ready to evacuate, a fire alarm 119, a person notify the hospital, urgent call the hospital staff emergency assistance.
③ the fastest speed to cut off the power supply of the floor (floor power switch in the middle of the stairway)
④ stabilize the mood of the patients and employees, orderly, organized patients, especially mothers, babies, quickly evacuated to a safe place.
⑤ In the effective time, grab out the flammable and explosive items, such as oxygen cylinders, alcohol and so on.
⑥ Before the arrival of 119 fire department, the volunteer firemen and employees, under the command of the managing director or department head, make full use of the existing fire fighting equipment in the hospital to put out the fire.
⑦ in the shortest possible time by the dean in charge of the fire reported to the competent departments and relevant departments, and organize the investigation of the cause of the fire and the aftermath of the work of the relevant personnel.
2, to the distribution room fire accident, the electrician should immediately cut off the power supply, with 1211 fire extinguishers or dry powder fire extinguishers to fight.
3, the warehouse fire accidents, warehousemen and volunteer firefighters should quickly cut off the power supply, the fire spread to the upper level, the control of the upper level, the lower level of defense; fire spread to the level, the first control of the left and right, and then the upper and lower defense. Up and down control, the upper level is the main. Pay attention to the evacuation of materials, and is responsible for the fire department to introduce the number of materials stored, the presence of dangerous, flammable items and trapped people and so on.
Second, on the general fire department fire emergency measures
On the general fire department in the event of a fire, the closest department to the fire accident, the personnel should be quickly extinguished, the head of the department and the volunteer firefighters rushed to the scene, organizing the personnel to extinguish the fire and quickly call the police. At the same time, the organization of personnel to organize important, valuable and dangerous goods, and make preparations for evacuation.
Third, the hospital leadership of the fire fighting emergency measures
The hospital in charge of fire safety vice president should quickly rushed to the scene of the fire accident, called the relevant leaders to set up a fire-fighting leadership group, to understand the situation and carry out the appropriate division of labor. The fire accident to take while rescuing trapped personnel while organizing personnel to control the fire, transfer and evacuation of materials, to the fire department to introduce the fire department or ward of the department of the house structure, distribution, water sources, the danger of materials and the situation of the trapped personnel.
Four, how to dial "119" fire phone
Once the fire, immediately dial "119" fire phone. Alarm do not panic, to report the fire occurred in the street (Youth Road, No. 288), the name of the unit, the name of the alarm and contact number and whether there are people trapped and the number of trapped people, to say clear section of the room with or without flammable and explosive substances (such as oxygen cylinders, alcohol, etc.). After the report, please do not rush to hang up the phone, wait for the police officer to say good and then hang up, such as he had any questions or did not hear clearly, please inform in detail.
Fifth, do a good job of prevention and prevention
Each section should do a good job of electricity safety. Preventive work, each section (post) to designate personnel usually do a good job with electricity and medical instrument performance safety checks and records (once a week), found that the problem timely report to the section chief or the dean in charge, no problem timely record on file, the hospital monthly record of the situation of an inspection, the results of the inspection and the individual system assessment and the section of the end of the year assessment is linked.
In short, the whole hospital staff should be familiar with and master the above content and measures to actively rescue and relief after the accident, in order to reduce losses and win time, and pay attention to protect their own safety.
System Emergency Plan 2
First, the hospital information system failure reporting procedures
When the workstations found that the computer access to the database is slow, can not enter the corresponding program,
can not save data, can not access the network, the application program discontinuous work, to immediately report to the Information Section. The staff of the Information Section must attach great importance to the problems raised by the workstations, make a good record, and after verification, give timely feedback to the workstations on the fault information, and at the same time convene the relevant personnel to discuss in a timely manner, if the cause of the failure is clear and can be immediately restored, the work should be resumed as soon as possible; such as the cause of the failure is not clear, the situation is serious, and it can not be eliminated in the short term, the leadership of the hospital should be immediately reported to the leadership, in the case of the network can not run The first thing you need to do is to get your hands on a new computer, and you'll be able to get it to work.
Second, the hospital information system failure classification
According to the reasons for the failure and the nature of the different into three categories:
A class of failures: due to the server can not work properly, fiber damage, the main server data loss, back-up hard disk damage, the server is unstable, the local network is not available, the price table directory was deleted or modified, the key terminal failure, the main server, the main server, the backup hard disk damage, server failure, the main server, the main server, the backup hard disk damage. deleted or modified, key terminal failure, regular overall, local software and hardware failure caused by network paralysis.
Class II failures: system failures due to single terminal software and hardware failures, loss of information on a single patient, occasional data processing errors, and violation of workflow in some departments.
Type III failure: due to the terminal operation of unskilled or improper use of the error.
For the above failure classification levels, the principles of treatment are as follows:
A class of failures - reported to the hospital leadership by the director of the information section, the hospital organization and coordination of the recovery work.
Class II failure - reported by the network administrator to the director of the information section, the information section to centralize the solution.
Class III failure - solved by the network administrator alone, and detailed registration of maintenance.
Third, the occurrence of network failure as a whole, the primary work
1, when the information section once identified as a network failure as a whole, the first thing is to immediately report to the leadership of the hospital, and at the same time, the organization of the recovery work, and take into account the full consideration of the special circumstances such as holidays, patient flow, personnel out and hospitals have major activities on the fault recovery time brought about by The first thing you need to do is to take a look at the situation and see how it affects you.
2, when the network found that the overall failure, the departments according to the degree of fault recovery time will be transferred to manual operation, the specific time limit is clear as follows:
(1) can not be recovered within 30 minutes - outpatient registration, hospitalization registration, pharmacy and other departments transferred to manual operation.
(2) can not be restored within 6 hours - the nurses workstations, pharmacy, 120 emergency center, operating room, medical examination transferred to manual operation (the specific time notified by the information section).
(3) 24 hours or more can not be recovered - the hospital's various businesses to manual operation.
Four, the specific coordination of various departments
1, all manual operations of the unified start time must be notified by the Information Technology Section, the relevant departments in strict accordance with the notification of the time to coordinate the various tasks, in the absence of a new instruction before not allowed to operate the computer privately.
2, outpatient registration work coordination
(1) outpatient charging office by the director of the outpatient department is responsible for contact coordination;
(2) after the network recovery, the operator should be in a timely manner during the interruption of the patient's information input to the computer;
3, outpatient charging (120 charges) work coordination
(1) by the director of the charging department is responsible for the overall liaison and coordination, to be with the information section of the computer. Overall liaison and coordination, to keep in touch with the information section, timely feedback and communication of the latest news;
(2) when the network system operation is interrupted for more than 30 minutes, to notify the cashier to switch to manual charging procedures;
(3) outpatient cashier to set up manual invoices to use the registry, invoices used to make a detailed registration;
(4) when the system is back to normal, the cashier is responsible for the network operation to the computer. The cashier is responsible for monitoring the stability of network operation, such as instability, timely feedback to the information section.
(5) After receiving instructions to use the computer and restart the operation, the cashier gradually transferred to the machine operation.
4, the coordination of the work of the Discharge Settlement Office
(1) the director of the Finance Section is generally responsible for liaison and coordination;
(2) in principle, not in the hospitalization, bookkeeping office for the cost of making up the entry to prevent confusion in the accounts;
(3) when the system stops running for more than 24 hours, the ordinary discharged patients, to postpone the time of discharge settlement. Patients discharged in an emergency should be manually accounted for and handwritten invoices issued based on medical records and clinical nurse workstation records.
(4) During the period when the network is out of operation, when a discharged patient is in urgent need of settlement, the nurse workstation of the department should track down whether there is still a checkup program in progress and provide detailed cost information to the Discharge Settlement Office before sending it for settlement.
5, nurse workstation coordination
(1) nurse workstation by the Department of Nursing *** with the coordination;
(2) network failure during the clinical departments should be recorded in detail all the costs of the patient's implementation;
(3) departments to fill out each patient's drug requisition form (including name, hospitalization number, fees, drug name and dosage), in duplicate. Two copies, one for the department to make up the doctor's orders, the other sent to the pharmacy as a voucher for medication.
(4) Discharged from the hospital with drugs by the doctor in charge of the financial situation, such as cost overruns in principle do not bring drugs;
(5) received a notice from the Information Technology Section to resume the operation of the time, in accordance with the requirements of making up the doctor's orders.
6, medical examination work coordination
(1) in the network shutdown period should be detailed retention, finishing the bottom of the examination application form;
(2) after the resumption of the network, according to the bottom of the examination form registration, through the manual recording of the patient's fees. (Attention to contact and communication with clinical departments)
(3) for the upcoming discharge or tendency to discharge patients, the attending physician should be in the examination request form to be noted, the examination department should be notified in a timely manner to inform the department or hospitalization to communicate the cost of the situation.
7, pharmacy work coordination
(1) strictly in accordance with the information section of the time and requirements of the notification of the operation;
(2) network failure according to the clinical departments provided by the drug requisition form issued drugs;
(3) network recovery of the clinical section of the prescription of the medicine to make up for the record of the drug to be issued and confirmed, and at the same time and the issue of drugs with the content of the drug requisition form detailed check, such as the content of discrepancies must be traced in detail. The content of the discovery does not match, must be traced in detail;
(4) network recovery on the discharge of drug prescriptions in a timely manner to confirm;
The workstations to receive re-run notification, you need to restart the computer, the overall network failure of the engineering recovery work, by the Information Technology Section in strict accordance with the requirements of the server data management restoration work.
V. Emergency data recovery work regulations
1, when the server confirms the failure, by the network administrator in accordance with the "Data Backup Recovery Program" for system recovery.
2, the network administrator by the director of the Information Technology Section to designate a person responsible for recovery. When personnel changes should be handover procedures.
3, when the network line is not available, the network administrator should be immediately present for maintenance, when the fiber is damaged should be immediately restored using a spare fiber, switch failure, you should use a spare switch.
4, the details of each recovery should be recorded in detail.
5, usually monthly on the whole system backup data should be simulated recovery once to check the availability of data.
Six, network server failure emergency procedures
Network server failure is due to hardware or software causes the hospital information management system to stop running, once the failure occurs, according to the following procedures.
1, the information section should be set up 24 hours on duty, monitoring network operation. Problems found in a timely manner at the same time quickly reported to the leadership of the department. After troubleshooting, the fault report should be completed and reported at the technical seminar.
2, encountered a large failure, the information section staff should be quickly assembled, collective attack. Specifically divided into three groups to do the following work:
(1) Troubleshooting group: centralized system administrators continue to analyze the fault, find the cause, repair the system.
(2) technical liaison group: quickly get in touch with software and hardware vendors to take effective means to obtain technical support.
(3) hospital coordination group: notify the hospital of the failure of each department, and to the key departments to assist in data preservation.
3, the hospital's various systems using the department to develop the appropriate system failure data protection measures, and the establishment of data rescue recording team, found that the downtime, should be saved breakpoints, to protect the original data, breakpoints before and after the form is stored separately.
4, during the downtime, the relevant departments should be organized data recording team on standby, once the system is restored, the day should be immediately completed on the important data entry, the next day to complete all the data recording.
5, after the troubleshooting, the information technology group should be developed according to the program to help important sections of the data recording work.
6, troubleshooting within 2 days, the Information Technology Section should organize technical seminars to analyze the cause of the failure, develop preventive measures to complete the troubleshooting report on the leadership of the hospital.
System Emergency Response Plan 3
In order to ensure the safe operation of the natural gas branch line pipeline and the natural gas system in the plant, and in the event of equipment, pipeline leakage or fire, can effectively control and deal with the dangerous situation, to ensure that the loss of life and property less loss, the development of this program.
I. Organization
When there is a dangerous situation of natural gas branch line and natural gas system in the plant, the enterprise accident emergency plan should be activated in accordance with the alarm categories specified in the enterprise accident emergency plan, as appropriate. The on-site rescue team is set up to eliminate the accident at the initial stage in a timely manner. The on-site rescue team consists of the following personnel:
1. 1 person, the team leader, by the chief of duty.
Responsibilities: responsible for the scheduling of rescue personnel, convey and implement the instructions of superiors, instructions, organization of personnel and implementation of the rescue program; responsible for the contact with the PetroChina West-East Gas Transmission Company Luzhi sub-transmission station, coordination, cooperation and other work.
2, the duty officer, by the duty of the combustion engine, steam engine and boiler operators.
Responsibilities: Timely implementation of emergency treatment work to reduce the occurrence of dangerous situations, while judging the size of the accident, decide whether to inform the higher leadership, public security and fire departments, accept and convey instructions and other work.
3, rescue personnel: by the combustion engine specialists, janitorial, maintenance personnel. Subject to the unified command of the chief of duty.
Responsibilities: responsible for repair, fire, leakage and other work.
Second, the emergency accident plan
1, found a small amount of leakage (will not cause fire, explosion and other life-threatening situations), you can in the case of not affecting the supply of gas to the leakage site of the source of the gas cut off, and to take the following measures:
1) for the leakage of the equipment and pipeline flange and flange to flange to check if the leaks can be stopped by tightening the bolts.
2) For valve leaks, immediately tighten the bolts at the seal on the valve to stop the leak.
3) For some small joints leakage, the joints should be tightened immediately, if it can not be solved, the idea should be to cut off the source of gas, remove the joints, and re-tighten them with raw material tape.
2, found a large number of leaks should take the following measures:
1) determine the leakage site should immediately cut off the source of gas, minimize its leakage, and notify the chief as soon as possible.
2) The leakage point in the pipeline between Luzhi sub-transmission station and the regulating station, you should notify the Luzhi sub-transmission station to close the exit valve and light a dispersal torch. Operators pay close attention to the downward trend of the inlet pressure of the regulating station, ready for shutdown. After the combustion engine flameout shutdown, close the inlet fire isolation door of the regulating station, open the pipeline dispersion valve in front of the inlet isolation valve, and speed up the gas discharge of the natural gas branch pipeline. Before carrying out repair work at the leakage point, the pipeline must be purged according to the specification requirements.
3) If the leak point occurs in the regulator station behind the inlet isolation valve, branch line switching should be performed immediately to quickly isolate the leak point. If the leakage point cannot be isolated, the chief of duty should be notified, the regulator station inlet isolation valve should be closed first, and the unit should be shut down for rapid load shedding. The time interval between inspections of the regulating station by operating personnel shall not exceed one hour.
4) If the leakage point occurs in the pipeline between the regulating station and the pre-positioning module, the regulating station outlet isolation valve should be closed as soon as possible to do a quick shutdown. After shutdown, open the bypass valve of the pre-positioning system shut-off valve to discharge.
5) If the leak occurs in the natural gas pre-positioning system, first measures should be taken to switch the branch to isolate the leak. If it is not possible to isolate the leak, the unit should be shut down quickly to reduce the load and close the inlet isolation valve of the pre-positioning system.
6) If the leak occurs in the gas chamber of the combustion turbine, the natural gas detector will issue an alarm, and the operator should promptly analyze the leak and prepare for shutdown. As long as any two of the three natural gas detectors detect a trip value, the combustion turbine will automatically shut down. Therefore, the operator must be ready for a load shedding shutdown before the unit automatically shuts down.
Three, fire emergency treatment
1, after the fire, should immediately take measures to control the gas source. First-line personnel should wear protective clothing or other appropriate clothing, the correct use of firefighting equipment, control of all sources of ignition, and promptly notify the chief of the duty, and organize personnel to take measures to control the danger.
2, on fire if you can not immediately stop and control, should be to the public security 119 help, and organizations try to close the upstream and downstream valves.
3, because of the fire can not close the regulator station inlet valve, should immediately notify the Luzhi sub-transmission station to close the outlet valve.
Four, after the accident
1, after the accident, to resume gas supply as soon as possible.
2, the accident and the danger is under control, to properly protect the scene, so that the accident investigators to investigate the cause of the accident.
V. Precautions
1, the occurrence of dangerous situations, first of all, to determine whether to set up an alert area to prevent fire or unrelated personnel to enter.
2, in dealing with emergency accidents should be more than two people to work together, it is strictly prohibited single person operation.
3, all must enter the hazardous area of the personnel, should be prohibited to carry cell phones, pagers, lighters, cameras, and clothing items that may produce static sparks into.
4, in the repair, it is prohibited to produce sparks of metal objects knocking each other, impact or with the ground knocking, impact. Should strictly comply with the relevant technical specifications and operating procedures, prohibit unauthorized operation, so as not to cause greater losses and casualties.
System Emergency Plan 4
When the circulating water pumping station power outage accident, the operator should be calm and cool, do emergency work.
1, the main duty on duty immediately check whether the diesel emergency pump is started, if not started, should immediately turn to manual start, check whether the diesel engine is working properly, the pump outlet pressure is normal.
2, diesel engine operation is normal, the main value to check whether the pressure of the jellyfish outlet pipe is normal, found abnormalities in a timely manner.
3, the shift deputy immediately open the blast furnace atmospheric pressure water and hot stove water pipeline tandem valve.
4, the main value of the guardianship of diesel engine operation, the deputy value of the telephone notification scheduling, the water units, high distribution room and related personnel.
5, manually close the power outage pump outlet electric butterfly valve, to facilitate the restoration of power supply as soon as possible after the resumption of production.
6, such as power outages for a longer period of time, pay attention to check the diesel fuel tank oil level, if the oil level is low, timely replenishment. If there is no emergency spare oil in time to contact the scheduler to send oil.
7, diesel engine operation, detailed records of diesel engine operating parameters and the pressure of each jellyfish supply pipe.
8, the power supply is restored, in order to operate the pump body on the water supply.
9, notify the scheduling and related water units, make a detailed record.
;