Chlorine dioxide generator adopts the chemical method of negative pressure aeration process, with sodium chlorate and hydrochloric acid as raw materials to prepare chlorine dioxide as the main, chlorine gas as a supplement to the mixed disinfection solution, can be widely used in drinking water, swimming pool water, hospital sewage disinfection; industrial circulating cooling water sterilization and algaecide; industrial wastewater decoloration, deodorization, or the removal of reductive pollutants.
Chlorine dioxide generator
Chlorine dioxide generator controller is an intelligent controller using computer technology, which completes the whole process control of chlorine dioxide generator. It includes temperature control, safety protection, various ways of dosing control.CPU system has low voltage detection reset, hardware watchdog, set data power-down protection. In order to adapt to the working environment of the generator, this controller adopts completely sealed design, all the circuits and external wiring are sealed in the controller, so the whole system has high reliability and stability.
Use place: Indoor (well ventilated). The indoor temperature should not be lower than 10℃ in winter.
Power source: water pressure 0.2～0.4MPa
Matching power supply: AC ?220V, 50Hz ?1～6KW
Overall structure: the generator consists of material supply system, reaction system, absorption system, control system and safety system; the generator shell is made of PVC material.
Working principle: the metering pump will be sodium chlorate solution and hydrochloric acid solution according to a certain proportion of input to the reactor, at a certain temperature and negative pressure conditions for a full reaction, the output of chlorine dioxide as the main, chlorine as a complementary disinfection of the gas, absorbed by the water ejector and the water is fully mixed with the formation of disinfectant, through the disinfection of the water being disinfected in.