Children's straw water cup lid installation method:
Currently on the market there are some straw cup cup lid is able to disassemble, the bottom cover of the straw cup and the inner cover are able to disassemble, the bottom cover has a reversed buckle piece, in the installation or disassembly, the reversed buckle piece of the deformation of the force will occur, the installation or disassembly is completed, the reversed buckle piece will return to its original position.
Children's straw cup spring installation:
1, the spring on the straw cup is generally installed in the cup exit that small part of the left, you need to use a hand to press.
2, then it is the red button is installed on, and then put in the push button, in the push button right will have a head out, mainly to install another spring.
Before installing the lid and spring on the straw cup, be sure to carefully read the installation instructions, and then follow the instructions step by step to install, if you really do not know how to install, you can ask a professional, do not mess with brute force to break the cup.
Children's water cup rope belt how to wear, installation video, how to tie the illustration
What should be used to fill the baby with water when traveling with the baby, this time should buy a special children's water cup for the baby. However, the second child water cup in addition to consider the quality, material, go out and good to carry is also very important, so many parents will give the child with a water cup to wear a rope belt, so children's water cup rope belt how to wear, how to tie the illustration as well as installation video.
Children's water cup rope belt wearing method:
First of all, you should take one end of the belt from the locking buckle, and then wear the belt on the locking buckle, this is to ensure that the belt will not easily fall off.
The next step is to put on the other end of the strap that can be moved, which needs to be threaded into the small rectangular hole on the water glass.
Finally, you need to loosen the strap in the latch, insert the movable end of the strap under the latch, and then pull it tight so that you can tie the strap on the children's water cup.
Parents in the children's water cup to wear rope belt process, if you find the children's water cup rope belt has some too long, you can in the children's water cup above the installation of an iron mouth, preferably day type, the main purpose of the installation of this is to regulate the children's water cup above the length of the rope belt. However, when wearing the rope belt, you should put the day-type lock side and folded up, and then the children's cup on the end of the rope belt through the small holes, and then wear the other end of the rope belt.
In addition, many people buy a water cup, do not know how to tie the rope above the belt, or the belt is dirty to remove it do not know how to tie up, to the rich light insulation pot as an example of the rope above the belt in the end how to tie, you can look at the video below, but different brands of cups may be a little different way to tie the belt, you can consult with the seller at the time of purchase.
Children's kettle lid installation diagram
Children's kettle, is now a lot of parents with babies will be prepared to go out of the tool, but the parents of children in the selection of children's kettle, it is best to choose a large brand of children's kettle to maximize the guarantee of the quality of the kettle, but also to choose the health of the material, the high temperature will not be released under the state of harmful chemicals, this article introduces you to children's This article introduces you to some of the contents of the children's kettle lid installation illustration.
In fact, the market to buy children's water bottles are installed, generally do not have to assemble their own moms and dads, but it's good to know about this knowledge, if the children's water bottle cover any problems, you can also disassemble and assemble their own look. However, if parents will not assemble, assembly before you can look at the relevant instructions, if you do not install it is not recommended to blindly assemble, you can ask a professional, so as to avoid damage to the parts of the children's water bottle cover.
In addition, many children's kettles now have with the exclusive strap, the child can choose to carry the children's kettle, want to drink a sip of water, and parents can also take this to free their hands, the parents will be much easier. However, parents to buy children's water bottles must ensure good quality and material safety, because the poor quality of the children's water bottles there are safety and health hazards, the growth and development of children have a bad influence.
Children's straw water cup cup lid assembly, disassembly tutorial
Parents give their children to use the straw water cup is mainly to exercise the child's coordination and the ability to drink water on their own, and it is also very convenient to use. But let the baby immediately accept the straw cup is certainly difficult, need to give the child a slow adaptation process. Daily life there are many people are more interested in children's straw cup cup lid assembly and disassembly, the following I and you introduce children's straw water cup cup lid assembly, disassembly tutorial.
Children's straw water cup cup lid disassembly tutorial:
1, first of all, the lid counterclockwise rotation, and the lid will be separated into two parts of the upper and lower.
2, split the children's straw cup cup lid lower part, as shown in the figure, first use one hand to hold the part A, and then use another hand to pull the part 2 outward, so that it can be split into the figure B represents the appearance of the 4 parts.
3, the children's water cup lid of the upper part of the split, as shown in Figure A, with a hand holding the lid of the upper part of 5, and then use the utensil will be hooked out of the part of the Figure 6, the process requires a little force.
4, the upper part of the lid to split 2, and then with the hook of the utensil inserted into the children's cup lid parts 7 groove, and then lift it upward, it will be able to point out the 7 as shown in the figure, and then 8, 9, 10 can be taken out, and take out all the parts as shown in Figure D, so that the whole children's siphon cup cup lid even if the dismantling is completed.
Children's straw water cup cup lid assembly back is also very simple, in accordance with the order of demolition of the reverse can be installed back step by step, if you still do not understand, you can also look at the manual, or the relevant video learning, but it is still recommended that parents, cups or do not casually dismantle the old dismantling installed so that it is easy to make the cup of the parts are damaged.