Single coil forming and binding machine equipment features: 1. Nylon covered wire or galvanized iron wire and other solid wire upper machine type for single coil (iron snake child), while binding in the booklet. 2. Different inner diameter of the coil can be replaced with different molds / pitch bars to complete the molding and binding. 3. Coil molding and booklet binding synchronization is completed with high efficiency, convenient and quick. 4. Post-printing binding is an important part of the printing and publishing industry, binding machine according to different paper and printing process of loose-leaf books, such as books, notebooks, and calendars and other loose-leaf binding. Currently on the market to sell office-type binding machines are mainly hot melt binding machine, double coil binding machine, iron ring binding machine, staple binding machine, financial binding machine and so on. The following is a simple introduction to the use of binding machines should pay attention to matters.
1, paper margin adjustment, the principle is: according to pull the circle diameter size to determine the size of the margin. The method is: with the adjusting screw (installed in the back of the binding machine) to adjust the scale to achieve the purpose of the margin. The rule is: pull the ring diameter, paper margin adjustment, pull the ring diameter is small, paper margin adjustment is small.
2, punching operation:
①The paper will be neatly organized, close to the positioning block, the paper will be fed into the machine parallel to the top in place.
② left hand pressure on the paper, the right hand holding the handle, press down to the blade through the paper, and then lift the handle.
3 Hands smooth to hit the paper out, such as the phenomenon of hanging paper, repeat the handle to press down, and then lift up in place can be taken out of the paper.
3, pull the ring binding method:
According to the number of paper, select the size of different specifications of the pull ring, the handle slowly push up to the pull ring to open, and then insert the paper hole into the pull ring, pull the handle back slowly, so that all the teeth of the pull ring inserted into the paper hole, pull the handle into place, tighten the mouth of the pull ring, the binding book is loaded.