Jingxiu Thermal Equipment Factory Manufacturing three integrated test chamber required technical difficulty is relatively large, so the cost is relatively expensive, of course, and the configuration is also related to the general in the 400,000-600,000 or so range, three integrated test chamber is the temperature, humidity and climate stress test and vibration and other mechanical stress test integration, the test system work, the temperature (high or low temperature, temperature change, humidity stress, vibration stress and electrical stress in the prescribed combination of space and cycle. Test system work, the temperature (high or low temperature, temperature change) stress, humidity stress, vibration stress and electrical stress according to the prescribed combination of ways and periodicity space, at the same time or separately applied to the sample. Compared with single stress action, it has the advantages of more realistic environment simulation and higher test efficiency. Widely used in product adaptability to the environment, the use of the reliability of the assessment and evaluation; applied to product design defects in the early detection of defects and process defects screening and other occasions.
Advantages:
1. With a wide range of temperature and humidity control, can meet a variety of needs.
2. Adopting unique balanced temperature and humidity adjustment, you can get a safe and precise temperature and humidity environment.
3. With stable and balanced heating and humidifying performance, it can carry out high-precision and high-temperature temperature and humidity control.
4. Equipped with high-precision intelligent temperature regulator, temperature and humidity using color LCD touch screen, can carry out a variety of complex program settings, program settings using dialogue mode, simple and rapid operation.
5. Refrigeration circuit automatic selection, self-control device with the temperature of the set value of the automatic selection of the operation of the refrigeration circuit performance, to realize the high temperature state of the direct start refrigeration, direct cooling.
Technical parameters:
Temperature range: low temperature -20 ° C or -40 ° C or -70 ° C or self-defined
High temperature: 150 ° C
Humidity range: 20%-98%
Temperature rate: warming 3 ° C/min cooling 1 ° C/min or self-defined
Maximum speed: 1 ° C/min.
Maximum excitation force (kg.f): 300 or 600 or 1000 or 2000
Maximum displacement (mmp-p): 25 or 38 or 50 or customized
Maximum acceleration (g): 100 or customized
Payload (kg): 110 or 120 or 200 or 300 or 400 or customized
Humidity range: 20% or 98%
Humidity range: 20% or 98%
Temperature change rate: warm up 3°C/min cool down 1°C/min or customized
Temperature change rate: warm up 3°C/min cool down 1°C/min or customized