Safe use of electricity in the office, emptying some electrical equipment makes people's office more convenient, but there are also some inevitable security risks in the use of electricity. Therefore, we should pay attention to the safety of electricity use during work. The following is the safe use of electricity in the office.
Office electricity safety 1 office electricity safety knowledge.
In the process of using the office computer, when there are abnormal conditions such as ignition, odor, high fever and abnormal sound, you must stop the operation immediately, turn off the power supply and find an electrician to check and repair it in time before you can continue to use it.
When the insulation of the power switch shell and wire is damaged or the live part is exposed, you should find an electrician to repair it immediately, otherwise it is not allowed to be used. When the disconnection is found, no matter whether it is charged or not, it should be regarded as charged, and keep a sufficient safe distance from the disconnection point, and report for repair in time.
Air outlets of air conditioners, computers and other electrical equipment should not be blocked or covered, and should be cleaned frequently to maintain good ventilation.
Advocate civilized use of electricity, indoor lighting should be turned off when people walk, and electrical equipment such as air conditioners, microwave ovens and computer copiers should be powered off and unplugged for a long time to prevent accidents.
Electric kettle (pot), table lamp and other electric heating devices must be far away from flammable materials. After use, cut off the power supply and unplug it to prevent accidents.
In case of electrical fire, cut off the power supply before extinguishing the fire, and call the police at the same time. If someone gets an electric shock, try to get out of the power supply immediately and take the right way to rescue him.
Matters needing attention in office electricity safety
Office power plugs and sockets, use safe and reliable products, not products without three products.
Try to avoid connectors on office wires. If unavoidable, ensure good contact at the joint.
If the insulation of the power switch shell and wire is damaged, please ask a professional to repair it immediately. Otherwise, it may lead to the danger of electric shock.
There should be space for the air conditioner and computer socket in the office, and there should be no debris blocking the socket, so as not to lose heat.
Electric kettle is a common electrical appliance in office, which should be separated from flammable materials, and the power supply should be cut off after use.
Turn off all the appliances in the office before people leave. The boss can see who often comes home at the latest, and then ask this person to check the power failure of electrical appliances.
If there is an electrical fire, first cut off the power supply, then put out the fire and call the police. If someone gets an electric shock, first try to separate the electric shock victim from the power supply, and then cut off the power supply in the right way.
In order to make the staff in the office react correctly in case of fire, the boss should arrange fire drills regularly.
Safe power consumption in office 2 1. The power supply of office appliances is mostly provided by patch panels. When in use, the same patch panel must not be plugged with too many electrical equipment, so as not to cause power overload of the patch panel, causing fever and fire.
2, avoid frequent use of the same wall socket, frequent use of a wall socket, will cause socket wire aging, and even cause fire due to current overload.
3. Small appliances commonly used in the office, such as shredders and sealers, have poor heat dissipation, so they should be kept away from flammable materials when used, and should be closed in time when not in use.
4. When charging mobile electronic devices such as mobile phones in the office, the charging time should not be too long. After the battery is fully charged, unplug the charger in time. Never leave the charger in the socket to avoid accidents.
5. Set the power management of smart appliances to power-saving mode, and the appliances will automatically enter the "sleep" mode when not in use, which not only saves energy and reduces consumption, but also avoids fire hazards. If you don't use electrical equipment for a long time, you should turn off the electrical power supply in time to avoid the long standby time affecting the service life of the equipment.
6, office drinking fountains, after work and holidays, should turn off the power supply, to avoid repeated start circulating water drinking fountains damage to the drinking fountains.
7. Don't pile up sundries beside power supply equipment, corridors and fire exits, so as to avoid damage to electrical equipment and sparks splashing on sundries.
8. Don't smoke in the office. If you want to smoke, you can smoke outdoors. Please pay attention to completely extinguish cigarette butts after smoking. In case of emergency, the office should be equipped with corresponding emergency fire fighting equipment.
9. Regularly check and maintain the electrical equipment and power cord of offices and office buildings to avoid potential safety hazards caused by aging circuits.
10, form a good habit of turning off the electricity conveniently, and turn off the electrical switch and power switch in time when you leave the office after work, which is energy-saving and safe.
Matters needing attention in safe use of electricity in office.
First of all, most office equipment is powered by sockets. When in use, it is forbidden to plug in too many electrical appliances, so as to avoid heat and fire caused by poor engagement between the socket and the plug.
Second, we can't just use some of the most convenient wall sockets and leave other wall sockets idle, which will lead to accelerated aging of socket wires and even accidents due to current overload.
3. Portable electrical appliances are generally small in size, poor in heat dissipation and prone to spontaneous combustion accidents. When in use, it should be far away from flammable items such as desktop and tablecloth, and its working temperature should be checked at any time.
Fourth, set the power management of smart appliances to power-saving mode, and automatically "sleep" when not in use, so as to reduce power consumption and avoid fire hazards. Don't let electrical equipment stand by for a long time, otherwise it will easily cause electrical damage or fire. Do not connect wires or electrical equipment at will.
5. Don't overload electricity. Don't panic if you find anything unusual without knowing the line load. In use, if there is any abnormal noise, smell, smoke, fire, etc. Don't try to take out or disassemble the equipment by hand. Operation with faults is prohibited. First, immediately disconnect the power supply, and then carry out treatment and maintenance according to the situation.
Six, shall not be piled up beside the electrical equipment sundry, affect the heat dissipation of the equipment, causing security risks.
Seven, do not use high-power electrical appliances in offices and other places, prohibit the use of electrical appliances that do not meet the national safety standards.
Office safety electricity 3 office safety management system
1. High-power electrical appliances such as electric furnaces and electric heating rods (rated power ≧400W) shall not be used, and electrical appliances shall not be connected privately. It is forbidden to use wiring boards in series. Shredder, computer, refrigerator, etc. Pay attention to the heat dissipation performance of electrical appliances and keep a distance from other objects. Charging equipment cannot be charged for a long time.
2, if the electrical or circuit failure should be reported to the administration department in a timely manner. It is strictly forbidden to install or change the power cord without permission.
3, the office should strengthen the management of electricity, turn off the computer after work, leave the room to cut off the power supply, and form a good habit of turning off the lights.
4. The microwave oven is safe to use, and it is forbidden to use metal and plastic tableware when heating. Avoid splashing soup and oil. Avoid idling.
How to rescue an electric shock accident?
What first aid measures should be paid attention to after electric shock?
1. If the patient is still on the leaking machine, please quickly push the patient away with a dry insulating cotton coat and quilt.
2. Cut off the power supply quickly. Immediately pull down the gate or power switch, unplug the plug, and let the electric shock person leave the power supply as soon as possible.
3, electric shock burn patients should be reasonable dressing change. Attention should be paid to the possibility of falling again in the rescue of high-altitude high-voltage lines.
4, confirm the electric shock heart stops beating, artificial respiration and chest compressions after first aid, can use cardiotonic.
Before cutting off the power supply, the rescuer should not touch the caller directly, which will cause him to get an electric shock immediately, because the human body is a conductor and it is easy to conduct current.