Need to see whether your projector meets the following conditions:
1, the projector supports 3DReady;
2, the right player, in fact, the general computer can also be realized, only on the graphics card requirements of some of the higher, the general HD player on the market may be achieved;
3, 3D source, that is, you play the video is made according to the 3D effect to the left and right eye alternating way to make, that is, the 3D version of a movie source, such as "Avatar" 3D version, the general movie is not with 3D effect;
4, supporting 3D glasses, generally with your DLP projector supporting the 3D eyes should be LCD 3D LCD (through the projector's signals synchronized with the left and right eye of the LCD lens switch to achieve the 3D effect). Check the above four conditions, if fully satisfied, you can get 3D effect on the projector.
Expanded Information:
Several imaging methods for the 3D effect:
The null separation method
p>Commonly used in movie theaters. Now there are many theaters have 3D stereoscopic screening room, screening through two projectors to play two cameras to shoot the film, in the screen will be synchronized with the appearance of two sets of differentiated images, generally viewed with polarized glasses, but also with spectral glasses.
2. Non-flash technology
Non-flash 3D TV way is the closest we actually feel the sense of three-dimensional, the most natural way. Just like enjoying the vivid 3D images in a movie theater, you can watch two images at the same time by attaching a special film that separates the left image from the right image to the surface of the 3D TV and the glasses.
The left and right images are separated by the TV and sent to the glasses at the same time. Through the filtering of the glasses, the left and right images are separated and sent to each eye, and the brain synthesizes the two images to make people feel the 3D stereoscopic sensation. The characteristics of flashless 3D: In terms of viewing angle, flashless 3D is not a problem when viewed within the recommended distance of the audiovisual.
3. Complementary color technology
is another 3D stereoscopic imaging technology, is now more mature, there are red and blue, red and green and other modes, but the principle is the same. The color separation method will be two different perspectives on the image taken on two different colors were printed in the same picture.
Such video in the projection is only with the naked eye can only see the blurred heavy shadow, and through the corresponding red and blue and other stereo glasses can see the stereo effect, to red and blue glasses, for example, red lenses can only see the image of red, blue lenses can only see the image of blue, the two eyes to see the different images in the brain overlap the 3D stereoscopic effect.
4. Time-division method
Time-division method requires the cooperation of the monitor and 3D switching glasses to realize the 3D stereo effect. The stereo glasses used in the time-division method are a bit complicated to construct, and of course cost more. Both lenses are electronically controlled, and can be switched according to the output of the monitor, the lens of the translucent, opaque switching so that the human eye can only see the corresponding picture (translucent state), the two eyes to see a different picture to be able to achieve stereoscopic imaging effects.
5. Lenticular
In order to meet the 2008 Beijing Olympic Games to receive television stereoscopic programs, our own lenticular stereoscopic television sets, but lenticular also has the disadvantage of clarity and other stereoscopic compared to be worse, only in the very large TV on the clarity of a slightly higher, but in this way, the price went up and want to overcome this shortcoming is to technological advances.
6. Platts stereo
This is a veteran of World War I found a way to look at the stereo (domestic called over the full stereo), this stereo TV technology and the original variety of television equipment compatible with the original system, the principle of the stereo program in the shooting, so that the camera to the left or right at a constant rate of speed, the main movement of stereoscopic effects. The audience to watch the program, wear a pair of special glasses corresponding to the left or right shift, this kind of glasses, one lens is transparent, the other is semi-transparent, the cost is low, if you do not wear glasses and watch ordinary television is no difference.
7. Screen-viewing mirror:
Previously dedicated to look at the stereoscopic camera to take pictures of the picture pairs, the picture pairs are generally presented left and right. Now this kind of screen-viewing mirror can also see the left and right type stereoscopic movies.
8. Holographic:
This can not be promoted at present. In all angles look three-dimensional, without stereo glasses. The price is surprisingly expensive, only in the Museum of Science and Technology has a display.