2, the installation of the chiller requirements: the installation of the chiller is best in the air circulation in the best position. The chiller should maintain a certain distance between the plate and the library, generally greater than the thickness of the chiller, for example, the thickness of the chiller is 0.5m, then the minimum distance between the chiller and the library plate must be more than 0.5m before. After the chiller is installed, it should be closed with sealing tape for the holes to prevent the occurrence of cold bridge and air leakage.
3, in the refrigeration unit should be installed before you choose to install what kind of refrigeration unit, generally small cold storage are installed fully enclosed refrigeration unit, and medium and large-scale cold storage is installed semi-enclosed refrigeration unit. At the end of the refrigeration unit installation needs to be installed
Installation of matching oil separator, and add the appropriate amount of oil, if the cold storage preset temperature below -15 ℃, then you should also add freezer oil. In addition, at the bottom of the compressor should be installed shock absorbing rubber seat, and leave a certain amount of space around the maintenance
repair space, easy maintenance and inspection. Professional cold storage engineering company for the overall layout of the unit have certain instructions, and the color should be uniform, each unit model installation structure should be consistent.
4, pipeline installation: pipeline diameter must meet the requirements of the cold storage design, and maintain a certain safety distance between the equipment, the installation position also needs to be adjusted according to the actual situation on site.
5, electrical control system installation: in each connection point must be marked, convenient for future maintenance, testing; so the wire must be fixed with a binding line; do a good job of moisture-proofing, to prevent the wire into the water leading to a short circuit.