As one of the touch inquiry integrated machines, the OBOO wall-mounted LCD touch integrated machine is different from the simple placement of the vertical touch integrated machine. It needs to be installed on the wall more stably, so that the OBOO wall-mounted touch integrated machine can be used better. It involves the installation environment, installation position, support bearing, load-bearing wall conditions and other issues, so the wall-mounted advertising machine must master the installation skills when installing to ensure normal use.
the machine takes out the inside of the package, and takes out all the protective bags and accessories outside the package for later use.
the machine is laid flat on the outer packaging of its own machine to prevent bumping or rubbing. Or put the OBOO wall-mounted touch integrated machine facing the desktop, and put a soft pad on the desk to avoid scratching the glass surface.
use the safety key randomly distributed by the wall-mounted touch screen integrated machine equipped with OBOO to open the safety door.
after the safety door is opened, use a screwdriver to remove the safety internal screw of the wall-hanging rack, which is convenient for removing the back plate of the wall-hanging rack. Then push the wall plate of the wall-mounted touch screen integrated machine towards the door lock by hand to remove the wall plate.
install WIFI antenna to connect WIFI network, and RJ45 network cable is also supported.
use a level or tape measure to measure the installation position and horizontal fixation of height and width of OBOO Wall-mounted Touch Integrated Machine, and mark points with a pen. Make sure that the wall can bear the weight of the machine, preferably a solid wall. On the wall of the painted positioning hole, punch out 6~8 holes (the number of holes depends on the weight of lcd advertising machine) with a 6mm or 8mm drill, and hang positioning holes with a depth of 5 mm..
Install the back plate of the wall hanger to confirm the position of the hole on the wall surface, punch the hole position with expansion screws and steel nails, or tap and fix the back plate. Stick the wall plate of the OBOO wall-mounted touch-screen integrated machine to the wall horizontally, and mark the place where the screwdriver needs to be fixed with a marker pen (generally 4-6 pieces below 22 inches, 6-8 pieces above 42 inches)
After fixing the back plate of the OBOO wall-mounted touch-screen integrated machine, two people * * * lift the machine to the position where the back plate is fixed, fix several fixing slots of the machine body, and remember to lock the mounting screws inside the safety door after fixing. There are four hanging holes in the back of the advertising machine, which are aligned with the four hanging nails on the wall-hanging board, so it is easy to hang them from top to bottom. Because of the weight, it is best for two people to install the touch inquiry all-in-one machine over 26 inches.
after hanging up the OBOO wall-mounted touch screen integrated machine, be sure to check whether it is stably hung up. Plug in the power cord and turn on the power switch to power on the machine
The last step is to start the machine directly. Remember to connect the network WIFI or network cable to play.