1, O-ring
Mainly used for static sealing and reciprocating motion seal.
When used for rotary motion sealing, limited to low-speed rotary sealing device.
2, V-type sealing ring
is a kind of axial action of the elastic rubber seal, used as a rotary shaft pressureless seal. Sealing lip has good mobility and adaptability, can compensate for large tolerances and angular deviation, can prevent the internal grease or oil leakage to the outside, but also to prevent the outside of the splash water or dust intrusion.
3, U-type sealing ring
Commonly used in the manufacture of hydraulic systems in the reciprocating seal. Widely used in construction machinery in the hydraulic cylinder seal.
4, rectangular sealing ring
Generally installed in the outer circle or inner circle on the cross-section of the rectangular groove to seal.
5, Y-type sealing ring
Widely used in reciprocating motion sealing device.
Additionally, there is a spring tension (spring energy storage) sealing ring, is in the PTFE sealing material to join a spring, O-type spring, V-type spring, U-type spring.
6, hole with YX-type sealing ring
For reciprocating motion hydraulic cylinder piston seal. Scope of application: TPU: general hydraulic cylinder, general equipment hydraulic cylinder. CPU: hydraulic cylinder for construction machinery and high temperature, high pressure cylinder. Material: polyurethane TPU, CPU, rubber. Product hardness: HS85±2°A.
Operating temperature: TPU: -40～+80℃CPU: -40～+120℃. Working pressure: ≤32Mpa.
Working medium: hydraulic oil, emulsion.
7, YX-type hole retaining ring (seal)
This standard applies to the cylinder working pressure is greater than 16MPa with YX-type sealing ring, or cylinder eccentric force, to protect the sealing ring.
Operating temperature:-40～+100℃.
Working medium: hydraulic oil, emulsion, water Product hardness: HS92 ± 5A Material: PTFE.
8, shaft with YX-type seals
For reciprocating motion hydraulic cylinder in the piston rod seal. Scope of application:TPU: general hydraulic cylinder, general equipment hydraulic cylinder. CPU: hydraulic cylinder for construction machinery and high temperature, high pressure cylinder. Material: polyurethane TPU, CPU, rubber. Product hardness: HS85±2°A.
Operating temperature: TPU: -40 ~ +80 ℃ CPU: -40 ~ +120 ℃ Working pressure: ≤ 32Mpa.
Working medium: hydraulic oil, emulsion.
9, shaft YX-type retaining ring (seal)
This standard applies to the cylinder working pressure is greater than 16MPa with YX-type sealing ring, or cylinder eccentric force, to protect the sealing ring.
Operating temperature:-40～+100℃.
Working medium: hydraulic oil, emulsion, water. Product hardness:HS92±5A.
Material:PTFE according to:Enterprise standard.
10, O-type rubber seals (GB1235-76)
This standard O-type rubber seals are suitable for hydraulic and pneumatic systems and a variety of mechanical equipment and components, in the specified pressure, temperature, and different liquids and gases in the medium, at rest or in motion to play a sealing role.
Operating temperature:-40～+230℃. Working pressure:<10～220Kg,f/cm. Working medium:air,water,oil. Product hardness:40～85±2A.
Materials:NBR, silicone, fluorine rubber, ethylene propylene rubber.
11, O-shaped sealing ring with retaining ring (seal)
This standard applies to the cylinder pressure is greater than 10MPa with O-ring use. Working temperature: -100 ~ 200 ℃
Working medium: hydraulic oil, emulsion, water
Material: PTFE according to: JB / ZQ4224-86 adapted to GB1235-76
12, J-type skeleton dust ring (sealing ring)
Used for reciprocating cylinders, cylinders, piston rods or valve stems exposed to play the role of dust. Dustproof function. Scope of application: TPU: engineering machinery, general machinery, cylinders and various types of valves. CPU: engineering machinery cylinders, oil and gas cylinders in poor working conditions. Material: polyurethane, nitrile rubber. Operating temperature: -40～120℃.