Use qq remote assistance, or TeamViewer, and ask the other party to give you your account number and password; If you are in a private network, you can connect to it through a remote desktop.
How to install software remotely on QQ
Let her order remote assistance first, and you accept that she can order application control again. You accept that you can see her desktop and control her computer.
How to install third-party software remotely without wiring?
First of all, you need a router with wifi at home, a wifi link of Xiaomi box, and a wifi link of Android phone. Then I downloaded Xiaomi's installation file package on the Internet with my mobile phone. Look at the picture below.
After entering the app store, find the remote installation in the management tools inside. Click to enter the interface. A web address will appear. Yes192.168.1xxxx, each millet box is different. After using Android phone and internet software to enter the website. Find the corresponding third-party installation package in your mobile phone and click Install. Do it.
How to install a remote control on someone else's computer?
First of all, despise plagiarists. The remote control that the landlord wants should be in the case that others don't know. I recommend several softwares that can realize remote control, such as black holes and grey pigeons. There are also many tutorials on Baidu. There is a remote desktop connector in the start menu, programs, accessories and arc facade. As long as the protocol is installed on the other party's computer, you can enter his IP after opening port 3389.
How to install a program on a remote computer after a remote desktop connection? How to copy local machine files to a remote computer?
As long as there is an installation program on the remote computer, the easiest way to copy local files to the remote computer is to open two QQ, one local and one remote, and then package the local files and send them to the remote computer. I hope it helps you.
How to use remote software?
1. Application of "Remote Assistance" in Windows XP System
Remote assistance is a simple remote control method provided by Windows XP system. The initiator of remote assistance sends a request for assistance to the contact person in Messenger through MSN Messenger, and after obtaining the consent of the other party, remote assistance can be carried out. In remote assistance, the computer of the assisted party will be temporarily controlled by the assisted party (called an expert in the remote assistance program), and the expert can carry out system maintenance, install software, deal with some problems in the computer, or demonstrate some operations to the assisted party.
If you have installed MSN Messenger 6. 1, you also need to install Windows Messenger 4.7 to perform Remote Assistance.
When using remote assistance, you can click the menu command "Operation → Seek Remote Assistance" in the main dialog box of MSN Messenger (as shown in Figure 2). Then select the contact to invite in the "Seek Remote Assistance" dialog box that appears. When the invitation is accepted, the Remote Assistant dialog box will open. The invitee can control the inviter's computer by clicking the Take Control button in the Remote Assistance dialog box.
As in MSN Messenger, master and slave devices can also type messages, talk and send files in the remote assistance dialog box. If the defendant wants to terminate the control, he can press the Esc key or click the "Stop Control" button to get back the control of the computer.
Application of 2.2. Windows XP "Remote Desktop"
Remote control using remote assistance is very simple to realize, but it can only be carried out with the cooperation of master equipment and slave equipment. Therefore, Windows XP Professional Edition provides another remote control method-remote desktop. With the remote desktop, you can remotely control the computer through the network in a place far away from the office. Even if there is no host, the remote desktop can still be carried out smoothly. In this way, remote users can use the data, applications and network resources in the computer, and it can also let your colleagues visit your computer's desktop to facilitate collaborative work.
(1) Configure Remote Desktop Host
The host of remote desktop must be a computer with Windows XP installed. The host must be connected to the Internet and have a legal public IP address. The Internet connection mode of the host computer can be ordinary dial-up mode, because the "remote desktop" can realize remote control only by transmitting a small amount of data (such as display data and keyboard data).
To start the remote desktop function of Windows XP, you must log on to the system as an administrator or a member of the administrators group, so that you have the right to start the remote desktop of Windows XP.
Right-click the My Computer icon and choose the Properties command. Click the Remote tab in the dialog box that appears, and then click the Select Allow users to connect to this computer remotely option box. Click the Select Remote User button, and then click the Add button in the Remote Desktop User dialog box, and the Select User dialog box will appear. (as shown in figure 3)
Click the Location button to specify the search location, and click the Object Type button to specify the object type to search. Next, in the Enter the name of the object to select box, type the name of the object to search for, and then click the Check Name button. After finding the user name, click OK to return to the Remote Desktop User dialog box, and the found user will appear in the user list of the dialog box.
If there are no users available, you can create them by using a user account in the Control Panel. All users listed in the Remote Desktop User List can connect to this computer using Remote Desktop. If they are members of the administrative group, they have the right to connect even if they are not listed here.
(2) Install the client software
Users of Windows XP can connect to the remote desktop through the "Remote Desktop Connection" program that comes with the system (in "Start → All Programs → Accessories → Communication") (as shown in figure 1). If the customer's operating system is Windows 9X/2000, you can install the Remote Desktop Connection client software on the Windows XP installation CD.
Insert the Windows XP installation CD into the client's CD-ROM drive and display ... >>
What software can the company computer install to connect to the remote desktop at home?
This method is much more. First of all, it must be the remote desktop connection that comes with windows. But because it is a company machine, you need to map the port in the company router first, and map the port 3389 to the LAN IP of the machine you want to control, so that you can control it remotely. The second one, Radmin, is very good. Install the server on the drug control machine, and then you can control the machine with the server on the machine with the client installed. Again, you need to map ports. The biggest difference between Radmin and remote desktop connection is the user. Remote desktop connection is the operation of using a new user to log in, while Radmin is the operation for the current user, which means that your operation can be observed on the monitor on the controlled machine, but for many software that need to bind ports, this remote control method is better. Of course, there are many other methods, so I won't list them one by one. I believe these two can solve your problem.
How to remotely install software and drivers and troubleshoot computer software,
Common computer problems and their solutions;
Problem 1: The computer can't start.
Possible reasons: There are various reasons why the computer can't start. This helps to find out whether the problem is caused by hardware or software.
Solution: You will play Sherlock Holmes once to find the abnormality of the computer. Please follow the following steps:
1. First, check all cables (including power plugs) to ensure that all devices are connected correctly and firmly.
2. Next, check whether the power supply is turned on. Listen to the sound of the power fan to see if the hard disk is working properly. If you don't hear any sound, you may need to replace the power supply equipment. To prove this, we can consider using power test equipment, such as PC power supply and cooling, to test the power output. Of course, before disassembling the computer, you should first check the short circuit of the power supply in the room and try to start other live equipment to ensure that there is no problem with the circuit.
If the power supply is normal, but the screen is still black, try to connect another monitor to the computer (you can borrow one if necessary) to make sure it is not a monitor. If the monitor works normally, change a video cable to see if there is still no image. If the hard disk can still work normally at this time, there is probably something wrong with the graphics card. To replace a new motherboard, please refer to our article "If the graphics card is replaced", or use the integrated graphics card of the motherboard, if the motherboard has this function. Open the chassis, and check whether all the fans work normally after starting. The computer may also encounter overheating problems.
4. If your monitor works normally, but the hard disk doesn't start, and there is no image on the display (or you can see the image, but the computer can't start through the self-test), consider resetting CMOS. Turn off the computer, unplug the power supply, and then put on anti-static protective gloves. , and remove the battery from the motherboard. Then wait about five minutes, consult your computer user manual or visit the manufacturer's website for information on how to reset CMOS settings. After the installation is successful, restart the computer to see if the problem is solved.
If the computer still can't start, the culprit may be that the memory module is broken. Remove one memory at a time (or replace it with known-good memory) and reboot after each replacement. In addition, you can also create a free MemTest86 startup disk on another computer, and then use it to select memory banks.
6. If all the above methods fail, it is possible that the motherboard or CPU is broken and needs to be replaced (the cost is more than 80 to 300 dollars). However, at this time, the data on the computer may still be intact. As long as the hard disk is connected to other PC hosts, all the data can be taken out. You can consider going to a computer repair shop to repair your computer, which is more cost-effective than replacing it with a new computer. If you use a laptop, a repair shop may be your best and only choice.
What if the operating system fails?
Compared with the terrible computer hardware failure mentioned above, you are much more likely to encounter software problems, such as Windows can't start or crashes when it starts. Next, I'll tell you how to deal with operating system problems.
1, start in safe mode. When Windows starts to enter the startup menu, press the specified key and select the safe mode from it. Usually choose safe mode, Windows will try to repair, and then shut down and start normally. If you have Windows Vista installed, you can try to select "Repair Your Computer" from the Start menu (if this option is not available in the Start menu, please look it up on the Vista installation CD). You will have many options to repair your computer, and "Start Repairing" is definitely worth a try.
2, still can't start normally? Try "Last Known Good Configuration" in the startup menu, which is very useful if you have recently changed your hardware or drivers. If the computer starts successfully, please replace the newly installed hardware (there may be compatibility problems) and "return the driver" in the device manager. Right-click My Computer (Computer in Vista), select Hardware (Windows XP system), and then select Device Manager.
3. If you can start the computer in full mode, but you can't enter the system in normal mode, you can try to use system restore to return to the last normal working state of the computer (in Windows XP, select "Program", "Accessories" and "System Tools"); For Vista, click Start and enter System ...>& gt
How to receive distance education
Installation steps of DTR5000N multifunctional digital satellite receiver
ring
1 and DTR5000N are multifunctional digital satellite receivers, which have two functions: TV reception and IP data reception. First, use the remote controller to set and input the correct parameters (i.e. downlink frequency, local oscillation frequency, symbol rate, polarization mode, tuner power supply mode, etc.). ), so as to realize the normal reception of SINO-1 satellite and six sets of educational TV programs in Ku band.
2. There are two ways to connect 2.DTR5000N and computer network card: reverse line and standard line.
Anti-line
Standard line
Install the receiver installer
1. Click setup on the installation floppy disk to install the receiver installer.
2. After restarting, right-click the 5000N icon in the lower right corner of the desktop. Select the fourth item "DTR IP address". Select the IP address of the receiver in the DTR IP address setting interface below, change it to a new IP address in the new IP address below and set your own password, click Chang IP, and then click Close to exit. The new IP address should be in the same network segment as the IP address of the local network card, that is, the first three digits are the same, and the last one is different. For example, if the IP address of the network card is 202.205. 160. 1, the IP address of the receiver can be set to 202.205. 160.5. The receiver can be regarded as a computer with a network card installed, and the network between the receiver and the computer should be smooth (can be PING). If you find that the IP address of the receiver cannot be selected and modified for a long time in the following interface and displayed in a virtual box during installation, it may be that there is a problem in the communication between the receiver and the computer, such as the allocation of IP addresses, and try to ask the network administrator to debug the network.
3. Right-click the 5000N icon in the lower right corner of the desktop, select the first item "Filter/Destination IP", and enter the IP address and password of the receiver again for confirmation. It can be clearly seen from this interface that the receiver and the network card are in the same network segment.
4. Right-click the 5000N icon in the lower right corner of the desktop, select "Data PID" and add PID every three items. Select "(Multiprotocol Encapsulation)", that is, the multiprotocol encapsulation option. Add PID of Central TV University as D3. Note: Due to different types of IP receivers, there are different restrictions on the number of PID added. Some receivers cannot add more than 8 PID's, while others have no limit. Adding too much PID will aggravate packet loss and error code.
5. Save and exit to complete the setup. In the future, the DTR5000N installer will start automatically every time WIN98 is started. Note "For all IP receiving devices, the installation program must be started before receiving data". After some IP device installers are installed, the execution files have been put into the "Start" of the start menu, such as DTR5000N introduced in this article, and the installation program will be automatically started when the computer is started. In addition, we can also add it manually. Install IP receiving software for distance education.
Please refer to the Installation Guide of IP Receiving Software for Distance Education.
Windows Setup does not allow installation from a remote desktop connection.
Windows software installation technology is Windows Installer.
Some applications do not support installation through Remote Desktop Connection, which is the type of connection used to connect to the virtual machine session when installing the integration package.
The failure of your installation must be that you enabled the integration function * * * and enjoyed the driver, hoping to access the folder of the physical system while the virtual machine was running.
To solve this problem, you can click disable integration function from the tools menu of the virtual machine window, install the software, and then click enable integration function to enjoy the drive.