How to paste the glass bumper glass bumper size is generally how much

Glass bumper in the life of the more common application, but there are still many people do not know the glass bumper specifically how t stick effect will be better, the following to give you an introduction to the glass bumper how to stick. What is the general size of the glass bumper.

One, how to paste the glass crash bars

1, first we need to protect the surface to be paste clean, remove the top of the grease and dust and other adulterants.

2, the place to be pasted surface for drying before further paste. Remember, it must be dry before, otherwise, paste if you paste patch set, easy to slip or have the phenomenon of air bubbles.

3, measure the length of use, and then cut the corresponding length respectively. This must be measured, because the field of vision is more comfortable when you look at the paste neat protection stickers.

4, the next step is to tear off the protective sticker backing, to tear slowly, to prevent it from sticking together, tear off the protective strip will be pasted on the surface of the glass. Not pasted on the line, there is a step to do.

5, after the whole glass door collision stickers for pressing firmly. This is completed.

Second, the size of the glass bumper is generally how much

Single, 8-10cm; 3, 2-3cm, the same interval.

The size of the glass door bumper is nothing more than the length, width and height, the length of the glass door bumper is the width of the glass door, the height of the bumper is about one meter from the ground, the width can be thick or thin.

The above is how to paste the glass bumper, glass bumper size is generally how much of the whole content, I hope to help you understand the glass bumper size related knowledge, more decoration knowledge, decoration company evaluation, decoration cases please continue to pay attention.