For the world's machining center brands, based on the precision of its equipment, configuration, price, market share and other relevant factors to make the machining center rankings; this article fails to involve all the machining center brands in the world, the machining center rankings are only for reference;
Chinese machining centers are currently used in the application of technology basically synchronized with the world, there is a relatively large gap between precision and stability and the world's first-class level. Synchronization of the world, in terms of precision and stability and the world's first-class level has a relatively large gap. Why the same one 850 vertical machining centers (X direction stroke of 800mm, Y direction stroke of 500), foreign and domestic have a big price gap, why the domestic machining centers between the brands also have a considerable price difference?
The typical vertical machining center manufacturers at home and abroad are divided into seven categories, the most conventional manufacturers standard configuration three-axis 850 vertical machining centers as an example (only for the main model, the configuration of each manufacturer will be different), to talk about the characteristics of these seven types of machining centers. By lining up and comparison, make a correct analysis of the position occupied by the domestic machining centers.
Each echelon of the distinction between the brain, the manufacturers mentioned in this article are subjected to years of market test to survive the enterprise, its machining center price is basically recognized by the market, machining center price basically reflects their product configuration and actual value. The final decision to the approximate selling price as the basis for this division is actually not very scientific, but also no way out of the way.
Tier 1 machining centers --- super first-class players: dive into their own way, let history evaluate it
Tier 1 in the Swiss Mikron, Switzerland Baomei, Switzerland Struger, Switzerland Ligit, Switzerland Weili Ming, Germany Hammer, Germany Omet, Germany Chiron and other brands, belonging to the field of machining centers, super first-class players, the selling price of more than 1.5 million.
Whether from the appearance of the inner, or the level of design and innovation, or processing capacity and processing accuracy, almost impeccable. Precision work, excellence, machine tool processing precision is very high, the output is very low. Because the price is too expensive, the cost of use is too high, the user is often in the case of necessity to buy.
The first echelon of the machining center brand image is high up, for ordinary users can only be seen from afar can not be blasphemous play carry on, as if the machine tool in the supercar. Curve high and low, the high cost of procurement and use directly lead to the market application rate is very low. Although the price is high, the profit is not necessarily high, although the quality is good, the operation is not necessarily good, after the bright turn may be tears of sorrow. Swiss Mikron has been acquired by the Swiss Archie Charmilles Group, the Swiss Baume & Mercier was acquired by the Swiss Strager ... not reminiscent of the world's top supercar Bugatti Veyron, the world's top car behind the world of car is the 4 degrees of change of hands of the tragic.
The quality of machining centers by the bed material quality, machining level, parts quality, assembly quality and production control to ensure that the quality of machining center assembly always rely on artificial guarantee, unlike automobiles, home appliances and other products can be automated assembly. Assembly technician level is high and low, machining center mass production and harsh delivery time constraints, because of this mass production of machining centers is difficult to ensure a high level, which is why the world's top ten sales of machining center manufacturers can not enter the first echelon of the reason. The big name of the almost familiar, is the world's leading machinery manufacturers of the main machining centers, the price positioning 80-1.5 million.
These players are always at the forefront of the world's machining center sales list. Generally small and medium-sized batch production, control in place, the quality is very good only for the production of high-margin products. The price is relatively grounded compared to the 1st tier.
The second echelon of manufacturers to promote strong, high market share, specializing in solving difficult machining problems, almost more than the first echelon. For a certain scale of machining enterprises, if there are not a few 2nd echelon players in town, are embarrassed to say that their products are first-class. Some companies are the vast majority of low-end machining centers, but also will buy a 2 echelon machine tool to fill the facade, dedicated to receiving orders and customer visits.
The 3rd echelon machining centers --- good attacker: do not complain and do not give up, solve the problem is the point
China-Japan joint venture BeiDa big snuggle, Sino-Japanese joint venture small giant Mazak, U.S. HARTING, U.S. Haas, South Korea Doosan, South Korea Hyundai, South Korea, South Korea, South Korea Samsung, Taiwan, Taiwan YongJin, Taiwan, Taiwan, Taiwan, Taiwan, Taichung Precision Machine, Taiwan, Taiwan, Taiwan, fast, Taiwan and other brands of the peak of first-tier machinery production enterprises. The main machining center brands in the domestic first-tier machinery manufacturers. The selling price is between 450,000-800,000 dollars.
The production of first-class products of the enterprise although also use the 1st and 2nd echelon of the machine tool, but due to the procurement cost is too high, the actual high-volume use of the 3rd echelon of machining centers are still the main. These machining centers are durable, reliable and stable, and do not fall off the chain at critical moments, is to ensure product quality and productivity of a good helper.
The 4th echelon of machining centers - the main combat: the strength is not bad fighting spirit, busy head hard work looking forward
North one, Beijing Institute of Mechanical and Electrical, Nantong Science and Technology, Shenyang, New Rui, Newell, Rifa, Haitian, Dajin, Taiwan Lichui, Taiwan Dachiao, Taiwan, Taiwan, Taiwan, Taiwan Dali, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan, Taiwan and other brands, is a first and second-line machinery manufacturers in the Main machining center brands. The price is around 32-45 million.
The 4th echelon of machining centers market share is no less than the 3rd echelon, although in terms of stability and precision maintenance is slightly inferior to the 3rd echelon, because the price is more affordable, the same has become a high level of machining enterprises in the main machining center models.
This echelon of enterprises by the outstanding domestic enterprises and some Taiwan enterprises mainland factories, a little effort may be a threat to the 3rd echelon, several private domestic machine tool companies start high, fast progress, and is very hopeful that after a few years to be among the 3rd echelon.
5th echelon machining centers --- oil of gold: not picky about food and work, what all do do
Baoji, Yunnan, Dalian, Long March, Hanchuan, Ningjiang, Kaida, Lianqiang (Xinzhe), Qinghai a machine, Lunan, Hangzhou machine, Baojia, Wanan, JieYongDa, YongHua, DilaiMu, Daitian, Jiatai, Longsheng and other brand of machining centers in any corner of machining enterprises are likely to see. enterprises are likely to be seen. The selling price is roughly $250,000 to $320,000 dollars. Some machining center brands also offer special models that cut corners and are not recommended.
This price range of 850 machining centers in the domestic market, the largest number of sales, the most accepted by ordinary machinery users, counting brands have one or two hundred more, the competition has reached the point of white-hot. What dirty work, tired work, no one to do the work of these machining centers are doing, the working environment is correspondingly harsh, constant temperature and humidity environment of the superior environment has nothing to do with them.
This echelon at least half of the manufacturers use the assembly of light machine way to produce Riga, product homogenization is serious, the entry threshold is relatively low. If the factories are of comparable size and reasonably well managed, there is very little difference between the quality of different brands.
Choose this echelon of machining centers need users with a relatively strong application capabilities, according to their actual needs and flexibility to choose the most suitable for their own machining center components and optional accessories, with the right, with a good machining centers can produce impressive products.
Domestic machining centers several giants are fully capable of creating the 3rd and 4th echelon of the Liga, but relax their requirements, self-satisfied and bland mixed in the 5th echelon to fight the price war, take the country's huge subsidies to do with small and medium-sized enterprises to compete for profits, call what is good to say? Several giants frequent mergers and acquisitions of foreign machine tool companies did not give their own products and markets to bring substantial improvements, but got the "foreign machine tool brand destroyer" nickname, where is the problem?
6th echelon machining centers --- affordable: can be used is not a waste, enough is a good choice
Haiteng, PepsiCo, Yiming, Dasen, Dingya, Hitech, Lichuang, Dingtai, Bo and other small brands generally choose low-end brand CNC system, about the sales price of 18-25 million. Part of the enterprise for the assembly of optical machine production model.
The 6th echelon of machining centers due to the relative small size of enterprises, quality standardized management is worse than the 5th echelon. At the same time in order to reduce costs, parts selection will also choose some cheap brands, the stability may have some impact, strict out of the grill and factory inspection is a good way to reduce the failure rate of the machining center factory.
For the product precision requirements are not high, the procurement budget is relatively tight for small and medium-sized enterprises, the 6th echelon of the machining center is a good choice. The advent of the Siemens 808D also gives this echelon of Liga more CNC options.
The 7th echelon of machining centers --- save money preferred: careful and meticulous selection of the right person, start a business start a good helper
The 7th echelon of machining centers assembled on behalf of the installation of guerrillas to pay the price of less than 180,000 yuan.
Practice is the user to buy their own optical machines, CNC systems, screws, tool magazines and other components, and then assembled on behalf of the guerrilla team is responsible for assembling the site, the level of quality and site conditions, assembled on behalf of the guerrilla team of the work of the mood is directly related to the quality control and other QC processes are not. The quality of service can be known without using your brain.
This grade of machining centers are generally used in Taiwan's new generation, Bao Yuan or domestic Kain Emperor, Guangzhou CNC system, Mitsubishi M70 and FANUC 0I-MATE MD is also very common. The brand used for the screw guide is not bad, and other components are purchased with the attitude of saving what can be saved.
If you have a good personal relationship with the guerrilla team, and the level of the generation of the installation of the technician is very high, and know a little mechanical and electrical maintenance, then congratulations you have greatly reduced the cost of procurement and use of machining centers. If not any two of these three conditions, then you pay the use of the price may be higher than the procurement of 6th or even 5th echelon.