What are the positioning skills of drainage oblique tee?
The accurate positioning method of the drainage oblique tee is actually to position the market according to the working principle of the right triangle, so the internal angle of the oblique tee is 45 degrees.
The difference between left and right drainage is that the purpose of drainage depends on the net weight of water itself. Therefore, only the drain pipe is placed horizontally, and it cannot be hung high for drainage. In this case, the drainage outlet must be specified, and it must be a short outlet such as an odor-proof floor drain. There is little difference between upper drainage and lower drainage. The invention has simple structure, power saving and low equipment failure rate. Most automatic washing machines are fully drained, and 95% semi-automatic washing machines are fully drained.
The difference between upper drainage and lower drainage
Drainage is completed by the built-in drainage pump of the equipment, and the drainage outlet can be discharged smoothly as long as it is not higher than 1 m. But this drain pipe must not be placed horizontally, because the equipment is directly discharged and there is an automatic switch of the drain valve. Be sure to hang it high as shown in the figure below, and then you can enter the deodorized floor drain, otherwise it will be discharged into the river.
How to choose drainage oblique tee
1, master the production process.
At present, the inclined tee commonly used in the market is divided into two ways, hydraulic press bulging and die forming. The expansion type of hydraulic press is made by special hydraulic press, and the compression type is made by heating and shrinking. Everyone can make decisions according to the needs of the application.
2. Pay attention to the application situation
When selecting the oblique tee, it is necessary to determine the main purpose in advance, whether it is based on water or oil, and then the size of the pipeline and the specification of the temperature regulating valve can be made clear, which is also to prevent it from being found inappropriate in the assembly process, and temporary disassembly and replacement can only prolong the progress of the project construction.
3. Select the three-way temperature regulating valve.
Because the temperature regulating valve plays a very important role in the installation and use of the oblique tee, it must be carefully selected. When purchasing, choose the appropriate temperature control valve according to the different liquid substances. Usually, the three-way temperature control valve can immediately replace the two-way valve and the three-way pipe, so it is very important.