Vacuum cellar
High quality wood
rubber tire
Chun rosewood
Prototype sculpture
Guitar worm processing equipment-cyclone milling
Special equipment for manufacturing guitar parts .....
1. Select materials. First, choose white wood without black scar.
2. planing. After selecting materials, it should be leveled with a planing machine. The wood thickness after leveling should reach 2.3 cm.
3. Open the neck material. Saw the wood flattened by the planer in half with an electric saw.
4. Butt the two broken neck materials with glue, and then fix them with tools.
5. Draw a shape. Draw the shape with the template and spin the shape of the neck with the band saw.
6. shaping and washing. Wash the shape with a double-shaft vertical washing machine, and the curvature at the back of the neck.
7. Slot. Make a groove with a fixed size in the neck to prepare for the lower adjusting rod.
8. The fingerboard is being processed. Fingerboard materials are mostly 5 mm thick rosewood.
9. Fingerboard. Stick the planed fingerboard on the neck of the piano.
10. Trim the neck. After the fingerboard is bonded, trim the neck and polish it with an abrasive belt.
1 1. Crush the product. Insert the silk into the fingerboard with good taste, and then use the machine to drive the silk into the fingerboard from top to bottom.
12. Grind the yarn ends. Reinforce the yarn with a pneumatic pulverizer to flatten it. In addition, the yarn head is polished with a belt sander to make it inclined at a 45-degree angle.
13. This is the finished neck and fingerboard.
14. Rotating shaft hole. Then finish machining. Paint it after grinding and send it to the drying room.
15. After drying, finely grind and spray matte paint. Fingerboard should also be finely polished and enter the installation stage.
16. Install the knob and the piano pillow.
17. Set. Assemble and combine the body and neck. This is an assembled electric guitar.
18. Install the pickup.
19. Welding line.
20. Install the strings.
2 1.
22. Install the rear cover.
23. Re-polish.
24. Clean the piano and put it in the box, and the whole production process is over.