1. What are the plastic steel fittings?
1, push-pull hardware fittings
For this kind of products, it is relatively simple to use and has good stability. The bottom is equipped with pulley installation system, which is very convenient to operate. But in daily use, we should pay attention to keep it clean. Once there is too much dust, please change the track, which will lead to derailment of doors and windows.
2. Flat doors and windows hardware fittings
The most important accessory of this kind of window is the hinge, so you should pay special attention when choosing. Generally speaking, the hinge is unidirectional, so it is always installed in the opening direction to prevent the hinge from affecting the window. The hinge of a metal window is usually welded on the outside of the window profile, the lock of the outer window is a rotating bolt, and the handle is usually combined with the lock.
3, sliding window hardware accessories
This style is rare in life, the inside is half open, the outside is half open, and the window is difficult to seal. Therefore, to achieve the same sealing effect as simply opening or opening the window, the cost of turning the window is relatively low. Generally speaking, the hardware of ordinary window hinges mainly consists of two rotating shafts, with corresponding locks and handles.
Two, plastic parts-three major manufacturers of plastic parts.
1, Zhan Jing door and window fittings factory
Zhan Jing Door & Window Fittings Factory is mainly engaged in hardware fittings, covering a wide range, constantly exploring and making progress, which fully embodies the innovative spirit of Beijing-Zhejiang Door & Window Fittings Factory. In the fierce competition, I can be in the core advantage, and the advantages of the door and window parts factory I want to participate in can not be underestimated.
2. Taixing Door and Window Fittings Factory
Its production base is located in Foshan, with its own workshop, large scale, obvious market competitive advantage and diverse products, including aluminum alloy door and window fittings. After years of continuous research and innovation, honesty, customer first and quality first, it has laid the future development direction of Taixing door and window fittings factory.
3. Jiruixiang Hardware Accessories
Manufacturers have a strong competitive advantage in the market. Of course, its products are also favored by a large number of consumers. Specializing in the production and sale of aluminum alloy door and window fittings. Its accessories include casters and slide rails, hinges, handles, furniture locks, connectors and so on. , covering a wide range.
Third, the purchase method of plastic steel parts
1, plastic steel windows can be customized. Before ordering, you must first determine how to open the window. The opening modes of plastic steel windows are push-pull and flat opening. After the owner confirms it, please ask the owner to measure it, and then customize it according to the indoor conditions. The seller exaggerated the tightness of the sliding window when selling it. In fact, sliding windows do not have the sealing function of casement windows. Pay attention to this when ordering.
2. When buying plastic-steel windows, be sure to find a regular manufacturer. There are many shops with simple processing equipment, which can not guarantee the accuracy and strength requirements, especially the plastic steel doors and windows. The quality of Neigang Village is very poor, persimmon has no steel village, and the hardware fittings are even worse.
3. Be prepared before measuring the size, because many salespeople in the door and window business are only responsible for the installation, not the size, and some unscrupulous businesses will falsely report the size. In order to make more profits in order, even some enterprises will add the cost of profile loss, so we measure the size in advance.
That's all about the plastic steel fittings that Bian Xiao introduced to you.