Open the door on the driver's side of the car, pull the hood switch on the left side of the driver's leg, and lift up the engine hood of the car. Support the hood of the car with a support bar, making sure it is firmly supported to avoid danger during operation. Replenish the car with the required amount of brake fluid to the MAX level to eliminate the problem.
Dongfeng Fengfeng handbrake can not be unlocked
Electronic handbrake pressed can not be disengaged, the car owner as long as you try to fasten the seatbelt in the car, ignition to start the car, hanging D gear and gently step on the gas pedal, the electronic handbrake will automatically be disengaged. Don't panic too much, unlike the mechanical handbrake will be driving forget to put down the situation, the general electronic handbrake can be automatically lifted.
Electronic handbrake is actually the latest technology to realize the parking brake through electronic control, its working principle is the same as the mechanical handbrake, which uses the friction generated by the brake disc and brake pads to control the parking brake, the difference is that the control mode has been changed from a mechanical hand brake lever to an electronic button.
If the owner of the car still can not be lifted after trying the above method of electronic handbrake holding state, then it is the electronic handbrake system failure, need to call a tow truck transported to the repair store, through the computer to read the fault code of the vehicle parking brake system, and then according to the fault code to analyze the fault point of the specific judgment, or to call the maintenance personnel to the door will be the electronic handbrake spare cable pull, and then go to the repair shop overhaul. Repair store overhaul.