1, gap handling
Before cleaning the cracks in the tiles, we can use a vacuum cleaner to clean the dust on the surfaces of the tiles. Then put the seam cleaning cone into the gap of the ceramic tile and push it forward to clean up a groove of about 3 mm
Seam cleaning tools such as seam cleaning cone are sharp, so be careful not to touch the edge of ceramic tile during construction to avoid porcelain collapse. Then we clean the gaps with tools such as brushes and sponges. Finally, we put the paper towel in the gap between the tiles. If the paper towel is wet, you can dry the gaps between the tiles with tools such as a hair dryer.
Step 2 paste masking paper
Everyone sticks masking paper along the edge of the tile gap. Be careful when pasting masking paper. Don't let the masking paper cover some cracks in the tiles. Masked paper at the intersection of tiles can be cut by wallpaper knife.
3. Install the glue gun
According to the width of the tile gap, cut a bevel on the discharge pipe with a utility knife. Then, the sealing port is poked on the sewing hose, and the discharge port is installed on the sewing hose. Then put your hand against the handle of the glue gun, pull back the pull rod of the glue gun and put it into the sewing hose.
Step 4 apply a beautiful sewing agent
Print 15-30 cm glue on white paper first, because the glue will be mixed unevenly when you use it for the first time. Next, aim the glue gun at the gap of the tile and glue evenly from top to bottom and from left to right.
Usually, after the caulking glue hits 2 meters, the discharge nozzle should be blocked with a toothpick, and then caulking should be carried out with a caulking stick. The sealant spilled on the ceramic tile should be wiped clean with a wet cloth in time. After the sewing construction is completed, we can tear off the textured paper.