There may be many reasons for the failure of easy running treadmill. The following are several common faults and their solutions.
1, Treadmill circuit failure
Because the treadmill needs power to run, circuit failure is a very common problem, mainly because the treadmill can't start or stop immediately after it starts. At this time, it is necessary to check whether the power supply of the treadmill is normal, whether the fuse is blown, whether the line is short-circuited, and replace or repair it in time when problems are found.
2. The treadmill has insufficient carrying capacity.
There is an upper limit to the load of the treadmill. If it exceeds the upper limit, the treadmill will run unsteadily or even be damaged. Therefore, before using the treadmill, be sure to check the maximum load-bearing capacity of the treadmill, and it is strictly forbidden to use it overweight.
3. Treadmill belt is slack
After long-term use, the treadmill belt will loosen, which will cause the running belt to shake and shake, which will seriously affect the running effect of the treadmill. At this time, it is necessary to adjust the tension of the belt to keep proper tension.
4. Treadmill sensor failure
Treadmill sensor is the key component to judge the speed and heart rate of treadmill. Once the sensor fails, it will affect the normal operation of many functions. At this time, it needs to be replaced or repaired.
In view of the above faults and treatment methods, we can use the treadmill better and use it for a longer time. In addition, it is necessary to maintain the treadmill every day, regularly clean the running belt, lubrication buffer system and other specific parts, prolong the service life of the treadmill, and make the exercise healthier and more enjoyable.